LIQUI MOLY Oil Additive

The low-friction lubricant MoS2 creates a heavy-duty lubricant film on all frictioning and sliding metal surfaces. It reduces friction, guaranteeing the aggregates run more smoothly. That produces these benefits: Significant fuel and oil saving, scientifically proven wear reduction, high reliability, antifriction properties.

Suitable for all commercial motor oils in gasoline and diesel engines with and without diesel particulate filter (DPF). Tested safe with catalytic converters and turbochargers. The dosage recommendation: add from 3-5 % to motor oil. For motorcycles with wet clutches, add maximum 2% of the oil filling volume. 

Colloidal solid lubricant suspension based on molybdenum disulfide (MoS2) in mineral oil. The product
forms a high-load lubricating film on all rubbing and sliding surfaces. This in turn reduces friction, providing for smoother operation of assemblies and greater engine economy. Tested for turbochargers and catalytic converters.

Supplied in 300ml bottles.

PROPERTIES
- Reduces oil and fuel consumption
- Reduces running-in and operating wear
- No deposits
- Highest thermal stability
- Absolutely compatible with filters
- Miscible with all commercially available motor oils
- Increases smooth operation
- Outstanding emergency-running properties

TECHNICAL DATA
Base: MoS2 -Suspension
Colour / appearance: schwarz / black
Solids content: ~ 3 %
Density at 20 °C: 0,9 g/cm³ DIN 51757
Flash point: 201 °C DIN ISO 2592
Pour point: -20 °C DIN ISO 3016
Odor: charakteristisch / characteristic
Form: flüssig / liquid
Viscosity at 40 °C: 95 mm²/s

AREAS OF APPLICATION
Mixable with all commercially available motor oils.
Added to the lubricating oils of engines, compressors, pumps and especially motor vehicle engines (gasoline and diesel).

APPLICATION
Shake container before use.
Can be added to motor oil at any time.
Add 5% (50ml per liter of oil) of oil additive to motor oil
For motorbikes with a wet clutch, add 2% (20ml per liter of oil) of oil additive to motor oil. The maximum dosage for motorcycles with a wet clutch is 2%!