LIQUI MOLY Engine Flush Plus

Combination of active agents made up of special additives and carrier fluid. Brings all types of oil-soluble and oil-insoluble residues into suspension and removes these from the oil circuit during the next oil change. Following this, the engine that has been cleared of deposits and contaminants and the fresh oil can then deliver its full performance.

Supplied in 300ml bottles.

Properties

• gentle cleaning
• rapid cleaning
• does not attack common sealing materials
• minimizes wear
• simple to use without disassembly
• optimal engine performance
• highly economical
• tested for particulate filters and catalytic converters
• tested for turbocharger

Technical data

Color / appearance	yellow, brown
Base	additive, carrier liquid
Flash point	63 °C
Pour point	-45 °C
Form	liquid
Viscosity at 40 °C	<7 mm²/s
Odor	characteristic

Areas of application

For cleaning and flushing out the oil circuits in gasoline and diesel engines. Use at each oil change. Can be safely used in vehicles with toothed belt running in oil. Not suitable for use in motorcycles with wet clutches!

Application

300ml sufficient for up to 6 litres of oil. Add to the motor oil at operating temperature before the oil change. Then allow engine to idle for approx. 10 minutes. Then change the oil and the filter. Compatible with commercially available motor oils.