PBS Protrack Performance Brake Pads
PBS Protrack Performance Brake Pads
PBS Protrack Performance Brake Pads

PBS ProTrack Performance Brake Pads (FRONT) - Ford Focus RS MK1

Brand: PBS
Part Number: 8003PT
£139.99
Description

PBS Protrack Brake Pads are high performance track brake pads that provide a great bite with pedal feel from cold.

With excellent brake fade resistance and an operating temperature of 0 to 700°C, this pad posses a lower initial bite with a great pedal feel and stopping power, making them a perfect for light track use, wet conditions or for those with low grip control tyres.

Perfect for sprints, time attack and circuit racing.

When on track, brake pads are subjected to pressure from caliper pistons as well as high friction heat. Performance Brake Solutions have undergone extensive brake pad testing in order to keep the brake pad remaining flat throughout the race in order to offer optimal performance. The technology used on the high quality steel backing plates ensure that the brake pad compound has the best holding capabilities under extreme driving conditions.

The Protrack brake pad material is 0.40 to 0.48mu, which provides progressive and predictable braking power.

Made by racing drivers for racing drivers.

Supplied as a set.

A direct fit for:

  • Ferrari 360 3.6 Challenge
  • Ferrari F430
  • Ford Focus RS MK1 FRONT
  • Peugeot 208 GTI (Brembo Caliper) FRONT
  • Peugeot 406 V6 (Brembo Caliper) FRONT
  • Renault Clio II V6 Sport (Brembo Caliper)
  • SEAT Cordoba Cupra 6K2 Facelift FRONT
  • SEAT Leon Cupra R 1.8T 20V 1M FRONT
  • SEAT Leon 1.8T 20V 1P FRONT
  • Tesla Model S 2012-2017 models REAR
  • Volvo S60 R 2.5T AWD REAR
  • Volvo V70 R II 2.5T AWD REAR

    PBS Brake Pad Bedding-in Process:

    PBS brake pads are put through a heat curing treatment during the manufacturing process and 'burns out' unwanted materials in advance, reducing the gases that can cause brake fade. Because of this treatment, PBS brake pads only require light 'bedding in'.

    It is recommend to perform 10 stops at low pressure and low temperature from 90MPH to approximately 50MPH, and the distance between each brake stop is to be approximately 600 to 800 meters.

    PBS brake pads should be bedded in until they are up to mid range working temperature and then allowed to cool properly. Doing this process will help to remove any gases that were in the brake pad compound and will create a perfect contact pattern between the brake disc and the brake pads.

    note: image is for illustration purposes and may differ on delivery

    Reviews