{"product_id":"endless-me22-brake-pads-rear-bmw-m235i-m240i-f22","title":"ENDLESS ME22 Brake Pads (REAR) - BMW M235i\/M240i F22","description":"\u003cp\u003eEndless ME22 brake pads are premium race-grade compound brake pads designed for serious track day and competition use!\u003cbr\u003e\u003cbr\u003eOffering exceptional bite, thermal stability, and pedal feel, the ENDLESS ME22 compound is a refined evolution of the renowned ME20, providing even better control under high-speed, high-load braking conditions.\u003cbr\u003e\u003cbr\u003ePerfectly suited to drivers demanding predictable modulation, fade resistance, and consistent performance over repeated laps.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003cbr\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMotorsport compound developed for track day and competition use\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eExcellent initial bite with stable friction through a wide temperature range\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eIdeal for high-performance cars, especially those on semi-slick or slick tyres\u003c\/li\u003e\n\u003cli\u003ePredictable pedal modulation with minimal fade\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eExcellent longevity brake pad wear for a Motorsport-grade brake pad\u003c\/li\u003e\n\u003cli\u003eFriction coefficient: 0.40–0.45μ approx.\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eOptimal temperature range: 150–800°C\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eLow-to-moderate with proper bedding disc wear\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eModerate Noise (not recommended for street use)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eHow to Bed-in ENDLESS Brake Pads:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThis process requires the brake discs to be brand new, if not then make sure the brake discs are clean and free from previous brake pad friction materials. Once ready, perform 8 to 10 medium-hard stops (60–80% pedal pressure) from 62MPH down to 14MPH over 3 to 5 seconds each time. Avoid activation of the ABS and never come to a complete stop during the cycles. You want to bring the brake disc temperatures to roughly 350°C - 450°C, then drive normally without heavy braking to let them cool completely to ambient temperature.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eInitial Seating - drive normally for a short period or a couple of days to let the physical faces seat mechanically.\u003c\/li\u003e\n\u003cli\u003eTemperature Build-up - accelerate to 62MPH safely on a clear road.\u003c\/li\u003e\n\u003cli\u003eControlled Slowdowns - apply 60–80% pedal pressure smoothly to drop speed to 14MPH (taking 3-5 seconds per stop).\u003c\/li\u003e\n\u003cli\u003eRepetition - complete 8 to 10 successive slowdowns without stopping the car or engaging the ABS, allowing airflow cooling between events.\u003c\/li\u003e\n\u003cli\u003eCool Down: Drive normally without using the brakes or pulling the handbrake until the system cools fully below 100°C. Inspect the brake discs for a smooth, even brake pad transfer layer.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eIf possible, perform the bedding in process on the track during a warm-up session or a dedicated practice slot rather than on public roads.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eTrack-Specific Adjustments:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePatience - do not rush the process; the compound requires progressive heat to properly bond with the rotor face.\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eHigher Targets - aim for the upper limit of the temperature range (near 450°C) to simulate track demands.\u003c\/li\u003e\n\u003cli\u003ePit Lane Rules - when returning to the pits after the bedding run, never apply the handbrake or keep your foot on the brake pedal while stationary, as this will imprint the pad material and ruin the rotor face.\u003c\/li\u003e\n\u003cli\u003eComplete Thermal Cycle - allow the brakes to cool completely to ambient temperature in the paddock before your first hot session.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eFinal Visual Check:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eGood Transfer - The brake disc face should exhibit a uniform, dull grey or slightly discoloured layer across the entire contact patch.\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eBad Transfer - There will be bright spots, black spots, or smeared \"smudge\" marks indicating uneven brake pad transfer or glazing, requiring you to lightly scuff the rotors and restart.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003enote: image is for illustration purposes and may differ on delivery.\u003c\/p\u003e","brand":"ENDLESS","offers":[{"title":"I accept that these are the brake pad shape I need (see second image).","offer_id":58803581354329,"sku":"EIP224CC38","price":417.47,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0933\/7765\/9225\/files\/ENDLESS-BPBOX_5cfcc2e4-da2f-4286-93aa-18189d506e46.jpg?v=1786221100","url":"https:\/\/www.rivalperformance.co.uk\/products\/endless-me22-brake-pads-rear-bmw-m235i-m240i-f22","provider":"Rival Performance","version":"1.0","type":"link"}