{"title":"Lotus Exige Series 2 (2004-2011)","description":"\u003cp\u003eThe Lotus Exige Series 2 (2004-2011) brings advanced aerodynamics and turbocharged power, delivering an exhilarating driving experience. Ideal for track days and spirited driving, the Exige Series 2 is loved by enthusiasts. Our performance parts include handling upgrades, brake kits, and exhaust systems to help you make the most of this high-performance model.\u003c\/p\u003e","products":[{"product_id":"bimecc-wheel-stud-nut-conversion-kit-lotus-exige-s2-s3","title":"Bimecc Wheel Stud \u0026 Nut Conversion Kit - Lotus Exige S2\/S3","description":"\u003cp\u003eBimecc Wheel Stud \u0026amp; Nut Conversion Kits, made in Italy, are crafted from 10.9 strength rating cold forged steel. Renowned for their quality, they are used in racing and motorsport events worldwide, making them ideal for those wanting to eliminate wheel bolts.\u003c\/p\u003e\n\u003cp\u003ePaired with open ended wheel nuts of the same thread pitch.\u003c\/p\u003e\n\u003cp\u003eSold as a set of 20.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eManufactured From Cold Forged Steel (10.9 Strength Rating)\u003c\/li\u003e\n\u003cli\u003eAvailable in 75mm, 82mm or 90mm Stud Length\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eSize Specifications:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e75mm - For use with or without 10mm spacers (15mm threaded hub length | 55mm threaded nut length)\u003c\/li\u003e\n\u003cli\u003e82mm - For use with 15mm spacers (15mm threaded hub length | 62mm threaded nut length)\u003c\/li\u003e\n\u003cli\u003e90mm - For use with 20mm spacers (15mm threaded hub length | 70mm threaded nut length)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eInstallation Process:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eWhen installing each wheel stud into the wheel hub, the use of thread lock such as Loctite 242 Blue must be used in order to ensure the wheel stud stays secured to the hub. Loctite 242 Blue is vibration resistant \u0026amp; good for up to 149degrees Celsius.\u003c\/li\u003e\n\u003cli\u003eEach wheel stud is to be torqued to 14NM, and each wheel nut is to be torqued to the same rating as the original car manufactures factory wheel bolt torque rate\u003c\/li\u003e\n\u003cli\u003eAfter approximately 50-60miles worth of use, check that the wheel nut torque rating has remained the same and re-torque if needed.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003enote: image is for illustration purposes and may differ on delivery.\u003c\/p\u003e","brand":"Bimecc","offers":[{"title":"75mm \/ Tapered Nuts (Aftermarket Wheels)","offer_id":54477634961753,"sku":"RM-WSNCK-M1250-75","price":89.99,"currency_code":"GBP","in_stock":true},{"title":"82mm \/ Tapered Nuts (Aftermarket Wheels)","offer_id":54477634994521,"sku":"RM-WSNCK-M1250-82","price":89.99,"currency_code":"GBP","in_stock":true},{"title":"90mm \/ Tapered Nuts (Aftermarket Wheels)","offer_id":54477635027289,"sku":"RM-WSNCK-M1250-90","price":89.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0933\/7765\/9225\/files\/wheel-studs_200d1c1a-998e-487d-a3e8-9ddbcc9818f5.jpg?v=1745264490"},{"product_id":"tpi-tuner-steel-wheel-bolts-lotus-exige-s2-s3","title":"TPI Tuner Steel Wheel Bolts - Lotus Exige S2\/S3","description":"\u003cp\u003e\u003cstrong data-mce-fragment=\"1\"\u003eTUNER KEY NOTICE - \u003c\/strong\u003eTPI Tuner Steel Wheel Bolts feature a unique 6 spline head. and require the TPI tuner wheel bolt key for installation \u0026amp; removal. The TPI tuner wheel bolt key is sold separately.\u003cbr\u003e\u003cbr\u003ePerfect for alloy wheels with small pocket holes. Both solid and durable with a race appearance. High Torque tested to 270ft\/lbs and are T6 Heat-treated.\u003cspan style=\"font-size: 0.875rem;\"\u003e\u003cbr\u003e\u003cbr\u003e\u003c\/span\u003e\u003cspan data-mce-fragment=\"1\"\u003eTapered fitment\u003c\/span\u003e\u003cspan data-mce-fragment=\"1\"\u003e, and a\u003c\/span\u003e\u003cspan data-mce-fragment=\"1\"\u003evailable in 28mm or 50mm length only.\u003cbr\u003e\u003cbr\u003eSold individually.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBolt Length Sizes:\u003c\/strong\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e28mm - Approx Factory length\u003c\/li\u003e\n\u003cli\u003e50mm - For use with 10, 12, 15, 20 or 25mm wheel spacers\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eNote: These wheel bolt heads are smaller than factory wheel bolt heads and have a tapered seated fitment.\u003c\/p\u003e\n\u003cp\u003enote: image is for illustration purposes and may differ on delivery\u003c\/p\u003e","brand":"TPi","offers":[{"title":"28mm","offer_id":54477635092825,"sku":"TB175110SD","price":1.65,"currency_code":"GBP","in_stock":true},{"title":"50mm","offer_id":54477635125593,"sku":"TB175195SD","price":2.46,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0933\/7765\/9225\/files\/tpi_tuner_wheel_bolts_2_3_f05c439b-3b7b-4eed-9f1a-ae797b128ada.jpg?v=1745264493"},{"product_id":"bimecc-steel-wheel-bolts-chrome-tapered-lotus-exige-s2-s3","title":"Bimecc Steel Wheel Bolts (Chrome) Tapered - Lotus Exige S2\/S3","description":"\u003cp\u003eBimecc Wheel bolts are both solid and durable.\u003c\/p\u003e\n\u003cp\u003eHigh Torque tested to 270 ft\/lbs. T6 Heat-treated.\u003c\/p\u003e\n\u003cp\u003eTapered fitment.\u003c\/p\u003e\n\u003cp\u003eAvailable in various lengths.\u003c\/p\u003e\n\u003cp\u003eSold individually.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBolt Length Sizes:\u003c\/strong\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e28mm - Approx Factory length\u003c\/li\u003e\n\u003cli\u003e35mm - For use with wheel spacers up to 7mm\u003c\/li\u003e\n\u003cli\u003e40mm - For use with 10, 12 or 15mm wheel spacers\u003c\/li\u003e\n\u003cli\u003e45mm - For use with 20mm wheel spacers\u003c\/li\u003e\n\u003cli\u003e50mm - For use with 20 or 25mm wheel spacers\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eNote: These wheel bolt heads are the same size as factory wheel bolts.\u003c\/p\u003e\n\u003cp\u003e \u003cbr\u003e\u003c\/p\u003e","brand":"Bimecc","offers":[{"title":"28mm","offer_id":54477635518809,"sku":"C17A28","price":1.64,"currency_code":"GBP","in_stock":true},{"title":"35mm","offer_id":54477635551577,"sku":"C17A35","price":1.64,"currency_code":"GBP","in_stock":true},{"title":"40mm","offer_id":54477635584345,"sku":"B34","price":1.84,"currency_code":"GBP","in_stock":true},{"title":"45mm","offer_id":54477635617113,"sku":"C17A45","price":1.84,"currency_code":"GBP","in_stock":true},{"title":"50mm","offer_id":54477635649881,"sku":"C17A50","price":1.94,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0933\/7765\/9225\/files\/BimeccTaperedWheelBolt_2e9bb1d2-24e8-41a8-9ba5-2dee3dd899a7.jpg?v=1773164479"},{"product_id":"bimecc-steel-wheel-bolts-black-tapered-lotus-exige-s2-s3","title":"Bimecc Steel Wheel Bolts (Black) Tapered - Lotus Exige S2\/S3","description":"\u003cp\u003eBimecc Wheel bolts are both solid and durable.\u003c\/p\u003e\n\u003cp\u003eHigh Torque tested to 270 ft\/lbs. T6 Heat-treated.\u003c\/p\u003e\n\u003cp\u003eTapered fitment.\u003c\/p\u003e\n\u003cp\u003eAvailable in various lengths.\u003c\/p\u003e\n\u003cp\u003eSold individually.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBolt Length Sizes:\u003c\/strong\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e28mm - Approx Factory length\u003c\/li\u003e\n\u003cli\u003e35mm - For use with wheel spacers up to 7mm\u003c\/li\u003e\n\u003cli\u003e40mm - For use with 10, 12 or 15mm wheel spacers\u003c\/li\u003e\n\u003cli\u003e45mm - For use with 20mm wheel spacers\u003c\/li\u003e\n\u003cli\u003e50mm - For use with 20 or 25mm wheel spacers\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eNote: These wheel bolt heads are the same size as factory wheel bolts.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e","brand":"Bimecc","offers":[{"title":"28mm","offer_id":54477635715417,"sku":"C17A28-ZINNI","price":1.84,"currency_code":"GBP","in_stock":true},{"title":"35mm","offer_id":54477635748185,"sku":"C17A35-ZINNI","price":2.1,"currency_code":"GBP","in_stock":true},{"title":"40mm","offer_id":54477635780953,"sku":"B34-ZNNI","price":2.2,"currency_code":"GBP","in_stock":true},{"title":"45mm","offer_id":54477635813721,"sku":"C17A45-ZINNI","price":2.2,"currency_code":"GBP","in_stock":true},{"title":"50mm","offer_id":54477635846489,"sku":"C17A50-ZINNI","price":2.45,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0933\/7765\/9225\/files\/BimeccTaperedWheelBolt_black.jpg?v=1773164491"},{"product_id":"mtec-performance-drilled-brake-discs-rear-288x26mm-lotus-exige-s1-s2","title":"MTEC Performance Drilled Brake Discs (Rear) 288x26mm - Lotus Exige S1\/S2","description":"\u003cp\u003eMTEC Performance Brake Discs are machined using state of the art CNC machinery to ensure a precision fit, and are a very popular choice for both factory \u0026amp; high performance cars.\u003c\/p\u003e\n\u003cp\u003eDeglazes brake pads, which helps prevent brake fade under heavy braking conditions as well as channelling water away from disc surface in wet conditions.\u003c\/p\u003e\n\u003cp\u003eDirect replacement to the original OE spec brake discs and are manufactured to the highest standards.\u003c\/p\u003e\n\u003cp\u003eContains 2x brake discs.\u003c\/p\u003e\n\u003cp\u003eMTEC Performance Brake Disc features:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eIncreases Braking Performance\u003c\/li\u003e\n\u003cli\u003eReduced Stopping Distances\u003c\/li\u003e\n\u003cli\u003eLong Disc Life\u003c\/li\u003e\n\u003cli\u003eLightweight\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eBrake Disc Coating:\u003c\/h3\u003e\n\u003cp\u003eAll MTEC performance brake discs come untreated unless specified, however MTEC offer an in-house coating treatment which prevents corrosion, prolongs brake disc life and provides a smart finish. This coating treatment can be completed is silver, black or gold edition.\u003c\/p\u003e\n\u003cp\u003enote: image is for illustration purposes and may differ on delivery\u003c\/p\u003e","brand":"MTEC","offers":[{"title":"Default Title","offer_id":54491018166617,"sku":"MTEC5483-MTEC5484","price":88.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0933\/7765\/9225\/files\/mtec_brake_discs_drilled_5b31732d-390e-4e0a-8838-c07d315b4b0c.jpg?v=1745499394"},{"product_id":"mtec-performance-drilled-brake-discs-front-288x26mm-lotus-exige-s1-s2","title":"MTEC Performance Drilled Brake Discs (Front) 288x26mm - Lotus Exige S1\/S2","description":"\u003cp\u003eMTEC Performance Brake Discs are machined using state of the art CNC machinery to ensure a precision fit, and are a very popular choice for both factory \u0026amp; high performance cars.\u003c\/p\u003e\n\u003cp\u003eDeglazes brake pads, which helps prevent brake fade under heavy braking conditions as well as channelling water away from disc surface in wet conditions.\u003c\/p\u003e\n\u003cp\u003eDirect replacement to the original OE spec brake discs and are manufactured to the highest standards.\u003c\/p\u003e\n\u003cp\u003eContains 2x brake discs.\u003c\/p\u003e\n\u003cp\u003eMTEC Performance Brake Disc features:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eIncreases Braking Performance\u003c\/li\u003e\n\u003cli\u003eReduced Stopping Distances\u003c\/li\u003e\n\u003cli\u003eLong Disc Life\u003c\/li\u003e\n\u003cli\u003eLightweight\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eBrake Disc Coating:\u003c\/h3\u003e\n\u003cp\u003eAll MTEC performance brake discs come untreated unless specified, however MTEC offer an in-house coating treatment which prevents corrosion, prolongs brake disc life and provides a smart finish. This coating treatment can be completed is silver, black or gold edition.\u003c\/p\u003e\n\u003cp\u003enote: image is for illustration purposes and may differ on delivery\u003c\/p\u003e","brand":"MTEC","offers":[{"title":"Default Title","offer_id":54491723596121,"sku":"MTEC5483-MTEC5484","price":88.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0933\/7765\/9225\/files\/mtec_brake_discs_drilled.jpg?v=1745505207"},{"product_id":"superpro-front-amp-rear-bush-kit-all-models-lotus-elise-s1-s2-340r-exige-s1-s2","title":"SuperPro Front \u0026 Rear Bush Kit (All Models) - Lotus Elise S1\/S2\/340R \u0026 Exige S1\/S2","description":"\u003cp\u003eSuperPro's innovative design and superior materials offer dramatic improvements in handling and give a more precise feel through the corners.\u003c\/p\u003e\n\u003cp\u003eSuperPro bushes are used by racers in various Motorsport competitions.\u003c\/p\u003e\n\u003cp\u003eUnlike some polyurethane bushes, SuperPro bushes show no increase in vibration or ride harshness, an attribute that makes them an good choice whether on road or track.\u003c\/p\u003e\n\u003cp\u003eProvides caster increase which is noticed when on track due to increasing steering effort, straight line tracking, as well as improving high speed stability \u0026amp; cornering effectiveness.\u003c\/p\u003e\n\u003cp\u003eDesigned for road, race and track use.\u003c\/p\u003e\n\u003cp\u003eSuperPro Polyurethane Bush Kit features:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eImproved handling and stability\u003c\/li\u003e\n\u003cli\u003eLong life, low maintenance\u003c\/li\u003e\n\u003cli\u003ePrecision engineered for an exact fit\u003c\/li\u003e\n\u003cli\u003eIncreased tyre and suspension life\u003c\/li\u003e\n\u003cli\u003eNo increase in vibration and road noise\u003c\/li\u003e\n\u003cli\u003e3 years\/36,000 miles guarantee\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eSuperPro Kit includes:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e1x SPF2602K - FRONT CONTROL ARM UPPER INNER BUSH KIT\u003c\/li\u003e\n\u003cli\u003e1x SPF2603K - FRONT CONTROL ARM LOWER INNER BUSH KIT\u003c\/li\u003e\n\u003cli\u003e1x SPF2603K - REAR CONTROL ARM UPPER INNER BUSH KIT\u003c\/li\u003e\n\u003cli\u003e1x SPF2604K - REAR CONTROL ARM LOWER INNER BUSH KIT\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eSuperPro Chassis Fitment List:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eLotus Elise Rear Wheel Drive (1995 to 2010)\u003c\/li\u003e\n\u003cli\u003eLotus Elise 340 R Rear Wheel Drive (2000 to 2001)\u003c\/li\u003e\n\u003cli\u003eLotus Exige SCC_ Rear Wheel Drive (2000 to 2012)\u003c\/li\u003e\n\u003cli\u003eOpel Speedster Rear Wheel Drive (2000 to 2005)\u003c\/li\u003e\n\u003cli\u003eVauxhall VX220 Rear Wheel Drive (2000 to 2005)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003enote: image is for illustration purposes and may differ on delivery\u003c\/p\u003e","brand":"SuperPro","offers":[{"title":"Default Title","offer_id":54495773327705,"sku":"KIT5134K-RG","price":312.17,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0933\/7765\/9225\/files\/elise_1_1.jpg?v=1745534079"},{"product_id":"superpro-front-amp-rear-bush-kit-k-series-engines-lotus-elise-s1-s2-340r-exige-s1-s2","title":"SuperPro Front \u0026 Rear Bush Kit (K-Series Engines) - Lotus Elise S1\/S2\/340R \u0026 Exige S1\/S2","description":"\u003cp\u003eSuperPro's innovative design and superior materials offer dramatic improvements in handling and give a more precise feel through the corners.\u003c\/p\u003e\n\u003cp\u003eSuperPro bushes are used by racers in various Motorsport competitions.\u003c\/p\u003e\n\u003cp\u003eUnlike some polyurethane bushes, SuperPro bushes show no increase in vibration or ride harshness, an attribute that makes them an good choice whether on road or track.\u003c\/p\u003e\n\u003cp\u003eProvides caster increase which is noticed when on track due to increasing steering effort, straight line tracking, as well as improving high speed stability \u0026amp; cornering effectiveness.\u003c\/p\u003e\n\u003cp\u003eDesigned for road, race and track use.\u003c\/p\u003e\n\u003cp\u003eSuperPro Polyurethane Bush Kit features:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eImproved handling and stability\u003c\/li\u003e\n\u003cli\u003eLong life, low maintenance\u003c\/li\u003e\n\u003cli\u003ePrecision engineered for an exact fit\u003c\/li\u003e\n\u003cli\u003eIncreased tyre and suspension life\u003c\/li\u003e\n\u003cli\u003eNo increase in vibration and road noise\u003c\/li\u003e\n\u003cli\u003e3 years\/36,000 miles guarantee\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eSuperPro Kit includes:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e1x SPF2602K - FRONT CONTROL ARM UPPER INNER BUSH KIT\u003c\/li\u003e\n\u003cli\u003e1x SPF2603K - FRONT CONTROL ARM LOWER INNER BUSH KIT\u003c\/li\u003e\n\u003cli\u003e1x SPF2605-19K - FRONT ANTI ROLL BAR MOUNT BUSH KIT (19mm)\u003c\/li\u003e\n\u003cli\u003e1x SPF2603K - REAR CONTROL ARM UPPER INNER BUSH KIT\u003c\/li\u003e\n\u003cli\u003e1x SPF2604K - REAR CONTROL ARM LOWER INNER BUSH KIT\u003c\/li\u003e\n\u003cli\u003e1x SPF2606K - ENGINE SUPPORT LOWER FRONT ENGINE BUSH KIT\u003c\/li\u003e\n\u003cli\u003e1x SPF2607K - ENGINE SUPPORT LOWER REAR ENGINE BUSH KIT\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eSuperPro Chassis Fitment List:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eLotus Elise Rear Wheel Drive (1995 to 2010)\u003c\/li\u003e\n\u003cli\u003eLotus Elise 340 R Rear Wheel Drive (2000 to 2001)\u003c\/li\u003e\n\u003cli\u003eLotus Exige SCC_ Rear Wheel Drive (2000 to 2012)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003enote: image is for illustration purposes and may differ on delivery\u003c\/p\u003e","brand":"SuperPro","offers":[{"title":"Default Title","offer_id":54495773426009,"sku":"KIT5134K","price":518.06,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0933\/7765\/9225\/files\/elise.jpg?v=1745534081"},{"product_id":"itg-maxogen-air-intake-induction-kit-toyota-fly-by-wire-throttle-lotus-exige-series-2","title":"ITG Maxogen Air Intake Induction Kit (Toyota Fly By Wire Throttle) - Lotus Exige Series 2","description":"\u003cp\u003eITG Maxogen Air Intake Induction Kits are fully road tested to prove both durability and performance, as well as undergo extensive rolling road testing to fully enhance it’s capabilities for the engine.\u003c\/p\u003e\n\u003cp\u003eDesigned for maximum airflow.\u003c\/p\u003e\n\u003cp\u003eAside from the increase in power, there is an improvement in throttle response as well as a pleasing, yet unobtrusive increase in intake noise.\u003c\/p\u003e\n\u003cp\u003eAvailable in Black Aluminium or Carbon.\u003c\/p\u003e\n\u003cp\u003enote: image is for illustration purposes and may differ on delivery\u003c\/p\u003e","brand":"ITG","offers":[{"title":"Black","offer_id":54496103858521,"sku":"ARAB65TES3","price":324.0,"currency_code":"GBP","in_stock":true},{"title":"Carbon","offer_id":54496103891289,"sku":"RAB65TES3","price":498.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0933\/7765\/9225\/files\/itg_exige_s2.jpg?v=1745536615"},{"product_id":"bc-racing-coilovers-br-series-lotus-elise-exige-05-11","title":"BC RACING COILOVERS BR SERIES - LOTUS ELISE\/EXIGE 05-11","description":"\u003cp\u003e\n  The BC Racing BR Series offers an affordable entry into coilover suspension without compromising performance, comfort, build quality, or handling. \n  Each kit is developed through extensive vehicle-specific testing to deliver a well-balanced and cost-effective upgrade for both road and occasional track use.\n\u003c\/p\u003e\n\n\u003cp\u003e\n  BR Series coilovers use a large 46mm piston inside a 53mm damper body to maximise oil capacity. As dampers operate, oil temperature rises and viscosity changes, which can affect consistency. \n  BC Racing use premium damper oil and increase the body volume to reduce peak temperatures, ensuring stable performance under sustained hard use.\n\u003c\/p\u003e\n\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003ePillowball top mounts (vehicle dependent)\u003c\/li\u003e\n  \u003cli\u003eBearing-mounted upper spring platform\u003c\/li\u003e\n  \u003cli\u003eCamber-adjustable top mounts (vehicle dependent)\u003c\/li\u003e\n  \u003cli\u003eRide height adjustment independent of spring preload\u003c\/li\u003e\n  \u003cli\u003e30-way damping adjustment\u003c\/li\u003e\n  \u003cli\u003eMonotube damper design\u003c\/li\u003e\n  \u003cli\u003eTapered bottom mount locking collar to prevent loosening\u003c\/li\u003e\n  \u003cli\u003eCustom spring rates available\u003c\/li\u003e\n  \u003cli\u003eSpare parts available with short lead times\u003c\/li\u003e\n  \u003cli\u003eDust boots to protect damper seals\u003c\/li\u003e\n  \u003cli\u003e1-year manufacturer warranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eSpring Rate Options\u003c\/h3\u003e\n\u003cp\u003e\n  BC Racing offer a range of spring rates to suit different driving styles and setups. For most applications, the \n  \u003cstrong\u003eRecommended\u003c\/strong\u003e spring rate is BC’s own tested specification and is ideal for fast-road use with the occasional track day, \n  providing the best balance of comfort and control.\n\u003c\/p\u003e\n\u003cp\u003e\n  Stiffer spring rates are available for more track-focused builds, cars with wider tyres, additional chassis upgrades, or heavier wheel and tyre setups. \n  Softer spring rates can be chosen when comfort is the main priority.\n\u003c\/p\u003e\n\u003cp\u003e\n  If you're unsure which spring rate is best for your needs, feel free to get in touch and we’ll help you choose the right setup.\n\u003c\/p\u003e\n\n\u003ch3\u003eOptions Available\u003c\/h3\u003e\n\u003cp\u003eNot all configurations apply to every vehicle.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eRS Series\u003c\/strong\u003e – Aluminium front mounts with rubber centres; rear rubber mounts or no rear mounts.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eRA Series\u003c\/strong\u003e – Front camber-adjustable pillowball mounts; rear rubber mounts or no rear mounts.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eRN Series\u003c\/strong\u003e – No front top mounts; rear rubber mounts or no rear mounts.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eRH Series\u003c\/strong\u003e – Front camber-adjustable pillowball mounts; rear pillowball mounts or no rear mounts.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"BC Racing","offers":[{"title":"RN \/ RECOMMENDED KIT 7\/8 KG.MM","offer_id":56663784522073,"sku":"LZ-0008432","price":1049.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0933\/7765\/9225\/files\/bc-racing-br-series-image1_0d983dad-e0d7-45ed-8cf5-67ffd9329e13.jpg?v=1763670125"},{"product_id":"rival-copper-wheel-nuts-tapered-lotus-exige-s2-s3","title":"Rival Copper Wheel Nuts (Tapered) - Lotus Exige S2\/S3","description":"\u003cp\u003eRival Performance Copper Plated Wheel Nuts provide a performance, luxury and a unique look to your alloy wheels.\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eAlso offers heat resistance, anti-seizing properties and corrosion resistance.\u003c\/span\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003ePerfect for use with any wheel bolt to wheel stud conversion kit.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eTapered seat fitment, and sold in sets of 20.\u003cbr\u003e\u003cbr\u003eA must-have upgrade.\u003cbr\u003e\u003c\/span\u003e\u003cstrong\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003enote: image is for illustration purposes and may differ on delivery\u003c\/span\u003e\u003c\/p\u003e","brand":"Rival Performance","offers":[{"title":"I accept that these are wheel nuts and not wheel bolts.","offer_id":57648318644569,"sku":"R-CWNS-M12150","price":96.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0933\/7765\/9225\/files\/RIVAL-CWN.png?v=1774289714"},{"product_id":"rival-superspline-tuner-steel-wheel-nuts-lotus-exige-s2-s3","title":"Rival Superspline Tuner Steel Wheel Nuts - Lotus Exige S2\/S3","description":"\u003cp\u003eRival Performance Superspline Tuner Steel Wheel Nuts are ideal for wheels with small pocket holes, and feature the added benefit of being external drive rather than the common internal drive.\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eSold in sets of 20.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eBeing steel, these are allowed in most Motorsport races whereas aluminium wheel nuts are not.\u003cbr\u003e\u003cbr\u003e\u003cspan\u003ePerfect for use with any wheel bolt to wheel stud conversion kit.\u003c\/span\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eAvailable in a Black or Chrome.\u003c\/p\u003e\n\u003ch3\u003eClose \u0026amp; Open Ended Wheel Nuts:\u003c\/h3\u003e\n\u003cp\u003eClose ended wheel nuts are perfect for use with factory wheel studs, but if using extended wheel studs then it should be noted that the wheel nut can only go so far onto the wheel stud before reaching it's limit. Open ended wheel nuts allow wheel studs to pass through the wheel nuts.\u003c\/p\u003e\n\u003ch3\u003eTuner Style Wheel Nuts:\u003c\/h3\u003e\n\u003cp\u003eA good tip if buying wheel bolts or wheel nuts for an aftermarket set of wheels, is to check the diameter of the wheel pocket hole. Some aftermarket wheel brands such as Japan Racing, Team Dynamics \u0026amp; XXR feature small pocket holes, and only the likes of tuner style wheel bolts or tuner wheel nuts will fit. Tuner style wheel bolts \u0026amp; wheel nuts tend to be 20mm in diameter, and can accommodate any aftermarket branded wheel set.\u003c\/p\u003e\n\u003cp\u003eNote: These wheel nut heads are a lot smaller than factory wheel nut heads and have a tapered seated fitment.\u003c\/p\u003e","brand":"Rival Performance","offers":[{"title":"Black \/ I accept that these are wheel nuts and not wheel bolts.","offer_id":57648321528153,"sku":"R-SSTWN-M12150-BLK","price":44.99,"currency_code":"GBP","in_stock":true},{"title":"Chrome \/ I accept that these are wheel nuts and not wheel bolts.","offer_id":57648321560921,"sku":"R-SSTWN-M12150-CHR","price":44.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0933\/7765\/9225\/files\/rival-superpline-black.jpg?v=1745269563"},{"product_id":"bimecc-steel-wheel-nuts-tapered-lotus-exige-s2-s3","title":"Bimecc Steel Wheel Nuts (Tapered) - Lotus Exige S2\/S3","description":"\u003cp\u003eBimecc Wheel Nuts are made from high strength steel and are coated in heavy duty black, making them ideal for track use.\u003c\/p\u003e\n\u003cp\u003ePerfect for use with any Bimecc Wheel Bolt To Wheel Stud Conversion Kit.\u003c\/p\u003e\n\u003cp\u003eSuitable for Motorsport use.\u003c\/p\u003e\n\u003cp\u003eSold in sets of 20.\u003cstrong\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003enote: image is for illustration purposes and may differ on delivery\u003c\/span\u003e\u003c\/p\u003e","brand":"Bimecc","offers":[{"title":"I accept that these are wheel nuts and not wheel bolts.","offer_id":57648330113369,"sku":"B-WNX20-M12150","price":30.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0933\/7765\/9225\/files\/rival_open_ended_steel_wheel_nuts_1_2_f5269d75-ca7a-4b5e-acec-eaf04548d8ae.jpg?v=1745370972"},{"product_id":"pbs-protrack-performance-brake-pads-front-lotus-exige-s1-s2","title":"PBS ProTrack Performance Brake Pads (FRONT) - Lotus Exige S1\/S2","description":"\u003cp\u003ePBS Protrack Brake Pads are high performance track brake pads that provide a great bite with pedal feel from cold.\u003c\/p\u003e\n\u003cp\u003eWith excellent brake fade resistance and an operating temperature of 0 to 700°C, this pad posses a lower initial bite with a great pedal feel and stopping power, making them a perfect for light track use, wet conditions or for those with low grip control tyres.\u003c\/p\u003e\n\u003cp\u003ePerfect for sprints, time attack and circuit racing.\u003c\/p\u003e\n\u003cp\u003eWhen on track, brake pads are subjected to pressure from caliper pistons as well as high friction heat. Performance Brake Solutions have undergone extensive brake pad testing in order to keep the brake pad remaining flat throughout the race in order to offer optimal performance. The technology used on the high quality steel backing plates ensure that the brake pad compound has the best holding capabilities under extreme driving conditions.\u003c\/p\u003e\n\u003cp\u003eThe Protrack brake pad material is 0.40 to 0.48mu, which provides progressive and predictable braking power.\u003c\/p\u003e\n\u003cp\u003eMade by racing drivers for racing drivers.\u003c\/p\u003e\n\u003cp\u003eSupplied as a set.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCaliper Fitment List:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFRONT Calipers\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eLotus Elise 340R FRONT\u003c\/li\u003e\n\u003cli\u003eLotus Elise Series 1 FRONT\u003c\/li\u003e\n\u003cli\u003eLotus Elise Series 2 FRONT\u003c\/li\u003e\n\u003cli\u003eLotus Elise Series 3 FRONT\u003c\/li\u003e\n\u003cli\u003eLotus Exige Series 1 FRONT\u003c\/li\u003e\n\u003cli\u003eLotus Exige Series 2 FRONT\u003c\/li\u003e\n\u003cli\u003eVauxhall VX220 2.0T FRONT\u003c\/li\u003e\n\u003cli\u003eVauxhall VX220 2.2 FRONT\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eREAR Calipers\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMitsubishi Lancer Evolution V REAR\u003c\/li\u003e\n\u003cli\u003eMitsubishi Lancer Evolution VI REAR\u003c\/li\u003e\n\u003cli\u003eMitsubishi Lancer Evolution VII REAR\u003c\/li\u003e\n\u003cli\u003eMitsubishi Lancer Evolution VIII REAR\u003c\/li\u003e\n\u003cli\u003eMitsubishi Lancer Evolution VIII FQ400 REAR\u003c\/li\u003e\n\u003cli\u003eMitsubishi Lancer Evolution IX REAR\u003c\/li\u003e\n\u003cli\u003eNissan 350Z Z33 REAR\u003c\/li\u003e\n\u003cli\u003eSubaru Impreza WRX STi GD REAR (Brembo caliper only)\u003c\/li\u003e\n\u003cli\u003eSubaru Impreza WRX STi Hatchback GR REAR (Brembo caliper only)\u003c\/li\u003e\n\u003cli\u003eSubaru Impreza WRX STi Saloon GV REAR (Brembo caliper only)\u003c\/li\u003e\n\u003cli\u003eSubaru Impreza WRX STi Hatchback GP REAR (Brembo caliper only)\u003c\/li\u003e\n\u003cli\u003eSubaru Impreza WRX STi Saloon GJ REAR (Brembo caliper only)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003ePBS Brake Pad Bedding-in Process:\u003c\/p\u003e\n\u003cp\u003ePBS brake pads are put through a heat curing treatment during the manufacturing process and 'burns out' unwanted materials in advance, reducing the gases that can cause brake fade. Because of this treatment, PBS brake pads only require light 'bedding in'.\u003c\/p\u003e\n\u003cp\u003eIt is recommend to perform 10 stops at low pressure and low temperature from 90MPH to approximately 50MPH, and the distance between each brake stop is to be approximately 600 to 800 meters.\u003c\/p\u003e\n\u003cp\u003ePBS brake pads should be bedded in until they are up to mid range working temperature and then allowed to cool properly. Doing this process will help to remove any gases that were in the brake pad compound and will create a perfect contact pattern between the brake disc and the brake pads.\u003c\/p\u003e\n\u003cp\u003enote: image is for illustration purposes and may differ on delivery\u003c\/p\u003e","brand":"PBS","offers":[{"title":"Default Title","offer_id":58231209197913,"sku":"8198PT","price":119.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0933\/7765\/9225\/files\/pbs_protrack_3_1_cd316698-e51a-48af-98d2-56f9cfeaa032.jpg?v=1745509382"},{"product_id":"pbs-prorace-performance-brake-pads-front-lotus-exige-s1-s2","title":"PBS ProRace Performance Brake Pads (FRONT) - Lotus Exige S1\/S2","description":"\u003cp\u003ePBS Prorace Brake Pads are high performance track\/race brake pads that provide a excellent bite with pedal feel from cold.\u003c\/p\u003e\n\u003cp\u003eWith excellent brake fade resistance and an operating temperature of 0 to 800°C, this pad posses a high initial bite with excellent pedal feel that will handle most serious braking conditions.\u003c\/p\u003e\n\u003cp\u003eFeatures NUCAP permanent bond NRS, which are hundreds of steel hooks that hold the pad compound onto the backing plate, and massively reduces the risk of pad compound coming apart from the backing plate under heavy track use.\u003c\/p\u003e\n\u003cp\u003ePerfect for sprints, time attack and circuit racing.\u003c\/p\u003e\n\u003cp\u003eWhen on track, brake pads are subjected to pressure from caliper pistons as well as high friction heat. Performance Brake Solutions have undergone extensive brake pad testing in order to keep the brake pad remaining flat throughout the race in order to offer optimal performance. The technology used on the high quality steel backing plates ensure that the brake pad compound has the best holding capabilities under extreme driving conditions.\u003c\/p\u003e\n\u003cp\u003eThe Prorace brake pad material is 0.36 to 0.58mu, which provides incredible stopping power.\u003c\/p\u003e\n\u003cp\u003eMade by racing drivers for racing drivers.\u003c\/p\u003e\n\u003cp\u003eSupplied as a set.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCaliper Fitment List:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFRONT Calipers\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eLotus Elise 340R FRONT\u003c\/li\u003e\n\u003cli\u003eLotus Elise Series 1 FRONT\u003c\/li\u003e\n\u003cli\u003eLotus Elise Series 2 FRONT\u003c\/li\u003e\n\u003cli\u003eLotus Elise Series 3 FRONT\u003c\/li\u003e\n\u003cli\u003eLotus Exige Series 1 FRONT\u003c\/li\u003e\n\u003cli\u003eLotus Exige Series 2 FRONT\u003c\/li\u003e\n\u003cli\u003eVauxhall VX220 2.0T FRONT\u003c\/li\u003e\n\u003cli\u003eVauxhall VX220 2.2 FRONT\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eREAR Calipers\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMitsubishi Lancer Evolution V REAR\u003c\/li\u003e\n\u003cli\u003eMitsubishi Lancer Evolution VI REAR\u003c\/li\u003e\n\u003cli\u003eMitsubishi Lancer Evolution VII REAR\u003c\/li\u003e\n\u003cli\u003eMitsubishi Lancer Evolution VIII REAR\u003c\/li\u003e\n\u003cli\u003eMitsubishi Lancer Evolution VIII FQ400 REAR\u003c\/li\u003e\n\u003cli\u003eMitsubishi Lancer Evolution IX REAR\u003c\/li\u003e\n\u003cli\u003eNissan 350Z Z33 REAR\u003c\/li\u003e\n\u003cli\u003eSubaru Impreza WRX STi GD REAR (Brembo caliper only)\u003c\/li\u003e\n\u003cli\u003eSubaru Impreza WRX STi Hatchback GR REAR (Brembo caliper only)\u003c\/li\u003e\n\u003cli\u003eSubaru Impreza WRX STi Saloon GV REAR (Brembo caliper only)\u003c\/li\u003e\n\u003cli\u003eSubaru Impreza WRX STi Hatchback GP REAR (Brembo caliper only)\u003c\/li\u003e\n\u003cli\u003eSubaru Impreza WRX STi Saloon GJ REAR (Brembo caliper only)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003ePBS Brake Pad Bedding-in Process:\u003c\/p\u003e\n\u003cp\u003ePBS brake pads are put through a heat curing treatment during the manufacturing process and 'burns out' unwanted materials in advance, reducing the gases that can cause brake fade. Because of this treatment, PBS brake pads only require light 'bedding in'.\u003c\/p\u003e\n\u003cp\u003eIt is recommend to perform 10 stops at low pressure and low temperature from 90MPH to approximately 50MPH, and the distance between each brake stop is to be approximately 600 to 800 meters.\u003c\/p\u003e\n\u003cp\u003ePBS brake pads should be bedded in until they are up to mid range working temperature and then allowed to cool properly. Doing this process will help to remove any gases that were in the brake pad compound and will create a perfect contact pattern between the brake disc and the brake pads.\u003c\/p\u003e\n\u003cp\u003enote: image is for illustration purposes and may differ on delivery\u003c\/p\u003e","brand":"PBS","offers":[{"title":"Default Title","offer_id":58231225811289,"sku":"8198PR","price":129.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0933\/7765\/9225\/files\/pbs_prorace_1_2_3_1_694d658a-a07a-4b0e-a34b-d1eed4f056f0.jpg?v=1745502682"},{"product_id":"pbs-protrack-performance-brake-pads-rear-lotus-exige-s1-s2","title":"PBS ProTrack Performance Brake Pads (REAR) - Lotus Exige S1\/S2","description":"\u003cp\u003ePBS Protrack Brake Pads are high performance track brake pads that provide a great bite with pedal feel from cold.\u003c\/p\u003e\n\u003cp\u003eWith excellent brake fade resistance and an operating temperature of 0 to 700°C, this pad posses a lower initial bite with a great pedal feel and stopping power, making them a perfect for light track use, wet conditions or for those with low grip control tyres.\u003c\/p\u003e\n\u003cp\u003ePerfect for sprints, time attack and circuit racing.\u003c\/p\u003e\n\u003cp\u003eWhen on track, brake pads are subjected to pressure from caliper pistons as well as high friction heat. Performance Brake Solutions have undergone extensive brake pad testing in order to keep the brake pad remaining flat throughout the race in order to offer optimal performance. The technology used on the high quality steel backing plates ensure that the brake pad compound has the best holding capabilities under extreme driving conditions.\u003c\/p\u003e\n\u003cp\u003eThe Protrack brake pad material is 0.40 to 0.48mu, which provides progressive and predictable braking power.\u003c\/p\u003e\n\u003cp\u003eMade by racing drivers for racing drivers.\u003c\/p\u003e\n\u003cp\u003eSupplied as a set.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCaliper Fitment List:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eLotus Elise 340R REAR (Brembo caliper only)\u003c\/li\u003e\n\u003cli\u003eLotus Elise Series 1 REAR (Brembo caliper only)\u003c\/li\u003e\n\u003cli\u003eLotus Elise Series 2 REAR (Brembo caliper only)\u003c\/li\u003e\n\u003cli\u003eLotus Elise Series 3 REAR (Brembo caliper only)\u003c\/li\u003e\n\u003cli\u003eLotus Exige Series 1 REAR (Brembo caliper only)\u003c\/li\u003e\n\u003cli\u003eLotus Exige Series 2 REAR (Brembo caliper only)\u003c\/li\u003e\n\u003cli\u003eVauxhall VX220 2.0T REAR\u003c\/li\u003e\n\u003cli\u003eVauxhall VX220 2.2 REAR\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003ePBS Brake Pad Bedding-in Process:\u003c\/p\u003e\n\u003cp\u003ePBS brake pads are put through a heat curing treatment during the manufacturing process and 'burns out' unwanted materials in advance, reducing the gases that can cause brake fade. Because of this treatment, PBS brake pads only require light 'bedding in'.\u003c\/p\u003e\n\u003cp\u003eIt is recommend to perform 10 stops at low pressure and low temperature from 90MPH to approximately 50MPH, and the distance between each brake stop is to be approximately 600 to 800 meters.\u003c\/p\u003e\n\u003cp\u003ePBS brake pads should be bedded in until they are up to mid range working temperature and then allowed to cool properly. Doing this process will help to remove any gases that were in the brake pad compound and will create a perfect contact pattern between the brake disc and the brake pads.\u003c\/p\u003e\n\u003cp\u003enote: image is for illustration purposes and may differ on delivery\u003c\/p\u003e","brand":"PBS","offers":[{"title":"Default Title","offer_id":58231406625113,"sku":"LZ-0919PT","price":166.5,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0933\/7765\/9225\/files\/pbs_protrack_3_1.jpg?v=1745257494"},{"product_id":"pbs-prorace-performance-brake-pads-rear-lotus-exige-s1-s2","title":"PBS ProRace Performance Brake Pads (REAR) - Lotus Exige S1\/S2","description":"\u003cp\u003ePBS Prorace Brake Pads are high performance track\/race brake pads that provide a excellent bite with pedal feel from cold.\u003c\/p\u003e\n\u003cp\u003eWith excellent brake fade resistance and an operating temperature of 0 to 800°C, this pad posses a high initial bite with excellent pedal feel that will handle most serious braking conditions.\u003c\/p\u003e\n\u003cp\u003eFeatures NUCAP permanent bond NRS, which are hundreds of steel hooks that hold the pad compound onto the backing plate, and massively reduces the risk of pad compound coming apart from the backing plate under heavy track use.\u003c\/p\u003e\n\u003cp\u003ePerfect for sprints, time attack and circuit racing.\u003c\/p\u003e\n\u003cp\u003eWhen on track, brake pads are subjected to pressure from caliper pistons as well as high friction heat. Performance Brake Solutions have undergone extensive brake pad testing in order to keep the brake pad remaining flat throughout the race in order to offer optimal performance. The technology used on the high quality steel backing plates ensure that the brake pad compound has the best holding capabilities under extreme driving conditions.\u003c\/p\u003e\n\u003cp\u003eThe Prorace brake pad material is 0.36 to 0.58mu, which provides incredible stopping power.\u003c\/p\u003e\n\u003cp\u003eMade by racing drivers for racing drivers.\u003c\/p\u003e\n\u003cp\u003eSupplied as a set.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCaliper Fitment List:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eLotus Elise 340R REAR (Brembo caliper only)\u003c\/li\u003e\n\u003cli\u003eLotus Elise Series 1 REAR (Brembo caliper only)\u003c\/li\u003e\n\u003cli\u003eLotus Elise Series 2 REAR (Brembo caliper only)\u003c\/li\u003e\n\u003cli\u003eLotus Elise Series 3 REAR (Brembo caliper only)\u003c\/li\u003e\n\u003cli\u003eLotus Exige Series 1 REAR (Brembo caliper only)\u003c\/li\u003e\n\u003cli\u003eLotus Exige Series 2 REAR (Brembo caliper only)\u003c\/li\u003e\n\u003cli\u003eVauxhall VX220 2.0T REAR\u003c\/li\u003e\n\u003cli\u003eVauxhall VX220 2.2 REAR\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003ePBS Brake Pad Bedding-in Process:\u003c\/p\u003e\n\u003cp\u003ePBS brake pads are put through a heat curing treatment during the manufacturing process and 'burns out' unwanted materials in advance, reducing the gases that can cause brake fade. Because of this treatment, PBS brake pads only require light 'bedding in'.\u003c\/p\u003e\n\u003cp\u003eIt is recommend to perform 10 stops at low pressure and low temperature from 90MPH to approximately 50MPH, and the distance between each brake stop is to be approximately 600 to 800 meters.\u003c\/p\u003e\n\u003cp\u003ePBS brake pads should be bedded in until they are up to mid range working temperature and then allowed to cool properly. Doing this process will help to remove any gases that were in the brake pad compound and will create a perfect contact pattern between the brake disc and the brake pads.\u003c\/p\u003e\n\u003cp\u003enote: image is for illustration purposes and may differ on delivery\u003c\/p\u003e","brand":"PBS","offers":[{"title":"Default Title","offer_id":58231434608985,"sku":"LZ-0919PR","price":183.15,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0933\/7765\/9225\/files\/pbs_prorace_1_2_3_1.jpg?v=1745257502"},{"product_id":"ebc-greenstuff-brake-pads-front-lotus-exige-s1-s2","title":"EBC Greenstuff Brake Pads (FRONT) - Lotus Exige S1\/S2","description":"\u003cp\u003eEBC Greenstuff brake pads now come in two series. The first is the 2000 series which is for spirited street use on lighter sports sedans and hot hatch cars.\u003c\/p\u003e\n\u003cp\u003eThen in 2021, EBC released a new elite 6000 series version of the EBC Greenstuff brake pad specifically for light trucks, jeep and SUVs. The new compound improves both the brake effect and longevity of the pads.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eEBC Greenstuff 2000 Series features:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eAs an eco-friendly pad grade, EBC Greenstuff 2000 contains no lead, copper, or toxic sulfides to comply with all environmental legislation and is a direct replacement for your stock or original pads reducing stopping distances and improving brake response.\u003c\/p\u003e\n\u003cp\u003eNot ideal for track use, although many drivers have used Greenstuff 2000 for Hillclimb and lighter cars on the track\u003c\/p\u003e\n\u003cp\u003eFor even faster street driving you might consider the EBC Yellowstuff grade or for race use the EBC new Bluestuff or RP and SR series brake pads\u003c\/p\u003e\n\u003cp\u003eThe EBC green range is approved to ECE R90 for highway use.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eA medium to low dust material that offer a nominal 10-15% brake improvement\u003c\/li\u003e\n\u003cli\u003eImproved resistance to heat fade at higher speeds\u003c\/li\u003e\n\u003cli\u003eSuits modern Euro and Asian models alike\u003c\/li\u003e\n\u003cli\u003eECE R90 approved for all cars that require the European legislation compliance\u003c\/li\u003e\n\u003cli\u003eRed brake-in surface coating accelerates pad brake in after install\u003c\/li\u003e\n\u003cli\u003eFeatures red “brake in’ surface coating for instant safe braking after install\u003c\/li\u003e\n\u003cli\u003ePads made with the Nucap NRS hook technology to ensure 100% secure pad bond\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eEBC Greenstuff™ 2000 has a high initial brake effect and gives drivers confidence from first application of the brake pedal. There is no such thing as a no dust pad. The very nature of how a brake works requires that some dust be generated to avoid rotor vibration (shimmying). The EBC pad creates less dust and dust is more easily washed off than most. All pads create more dust as they are bedding in especially if rotors are worn. Nominal friction coefficient 0.55. For heavier faster cars we strongly recommend Redstuff which does offer much less dust.\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eEBC Greenstuff 6000 Series features:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eAn excellent solution for 4×4 and light truck use, this heavy-duty Greenstuff™ Elite brake pad has the benefit of longer life and better resistance to off-road conditions of dust and sand etc. It has an extremely low rotor wear factor and a medium-to-good lifetime.\u003c\/span\u003e\u003cspan class=\"apple-converted-space\"\u003e \u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSuperb daily driver R90 type approved pad.\u003c\/li\u003e\n\u003cli\u003eFeatures red “brake in’ surface coating for instant safe braking after install.\u003c\/li\u003e\n\u003cli\u003eNew 100 % ECO friendly material with ZERO sulphides.\u003c\/li\u003e\n\u003cli\u003eNo shims for noise reduction needed.\u003c\/li\u003e\n\u003cli\u003eMore bite from cold.\u003c\/li\u003e\n\u003cli\u003eWorks in hot and dry climates as well as in cold.\u003c\/li\u003e\n\u003cli\u003eFully R90 approved as was the original Ultimax grade.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eUltimax offers great value for money and first class driving safety.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eA direct equivalent to OE brake pads\u003c\/li\u003e\n\u003cli\u003eSuitable for general public highway use in hot and cold climates\u003c\/li\u003e\n\u003cli\u003eEBC's quietest pad formulation for silent braking\u003c\/li\u003e\n\u003cli\u003eProgressive braking feel with excellent cold friction\u003c\/li\u003e\n\u003cli\u003eBrake-In™ coating for accelerated pad bed in period\u003c\/li\u003e\n\u003cli\u003eR90 approved thus legal for public highway use in European markets\u003c\/li\u003e\n\u003cli\u003eMade with Nucap NRS hooks on back plates to totally eliminate the chance of pad debond\u003c\/li\u003e\n\u003cli\u003eNot suitable for track use\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow to Bed-in EBC Greenstuff™ Brake Pads\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eEBC brake pads are now mostly self bedding. The Ultimax2, Greenstuff, \u003c\/span\u003e\u003cspan\u003eRed\u003c\/span\u003e\u003cspan\u003estuff, and \u003c\/span\u003e\u003cspan\u003eYellowstuff compound grades come with a brake-in coating that scrubs the rotor surface, accelerates pad seating times, and provides a strong brake effect for the first 100 miles of use as the brake pads seat themselves. After the first 100 miles or so, unless you are going to drive aggressively, there is nothing more to do meaning – most drivers happily use and enjoy their brake’s excellent performance for tens of thousands of miles after this point. If that’s your way of driving, nothing more needs to be explained. Just enjoy your brakes.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFast street driving\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eIf you drive aggressively or in a “Spirited” fashion on roads where it is safe to do so, after seating the pads to your rotors and certainly not before 300 miles of use , you should be prepared for the brake pad to emit an odour or even exhibit some smoke as the pads burn off what EBC call “surface volatiles”.\u003c\/p\u003e\n\u003cp\u003eMany faster drivers experience this in harder braking and criticize the brake pad whereas in fact, this is only part of the final high-end bedding-in process as the pads see rotors temps of 400-500C for the first time (not normal in everyday driving).\u003c\/p\u003e\n\u003cp\u003e\u003cspan data-mce-fragment=\"1\"\u003eOnce seated, any organic brake pad made by EBC performs better once the pad goes through heat curing or what EBC call “Green Fade” which happens during its first severe use. The green fade point is 400C\/650F. There are two ways to know if you have passed the green fade point – one is via the use of heat paints, the second way is to guess. So heat paints are the better option.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eYou should drive with caution until bedded flat and you have passed this green fade point at least twice and then allowed the brake pads to cool so the disc is below 100C.\u003c\/p\u003e\n\u003ch3\u003e\u003c\/h3\u003e\n\u003cp\u003enote: image is for illustration purposes and may differ on delivery.\u003c\/p\u003e","brand":"EBC","offers":[{"title":"Default Title","offer_id":58232300044633,"sku":"DP2197\/2","price":75.08,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0933\/7765\/9225\/files\/Greenstuff-pads_d72e09b4-06c1-480e-8a14-ed3be0068c53.jpg?v=1745257900"},{"product_id":"ebc-greenstuff-brake-pads-rear-lotus-exige-s1-s2","title":"EBC Greenstuff Brake Pads (REAR) - Lotus Exige S1\/S2","description":"\u003cp\u003eEBC Greenstuff brake pads now come in two series. The first is the 2000 series which is for spirited street use on lighter sports sedans and hot hatch cars.\u003c\/p\u003e\n\u003cp\u003eThen in 2021, EBC released a new elite 6000 series version of the EBC Greenstuff brake pad specifically for light trucks, jeep and SUVs. The new compound improves both the brake effect and longevity of the pads.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eEBC Greenstuff 2000 Series features:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eAs an eco-friendly pad grade, EBC Greenstuff 2000 contains no lead, copper, or toxic sulfides to comply with all environmental legislation and is a direct replacement for your stock or original pads reducing stopping distances and improving brake response.\u003c\/p\u003e\n\u003cp\u003eNot ideal for track use, although many drivers have used Greenstuff 2000 for Hillclimb and lighter cars on the track\u003c\/p\u003e\n\u003cp\u003eFor even faster street driving you might consider the EBC Yellowstuff grade or for race use the EBC new Bluestuff or RP and SR series brake pads\u003c\/p\u003e\n\u003cp\u003eThe EBC green range is approved to ECE R90 for highway use.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eA medium to low dust material that offer a nominal 10-15% brake improvement\u003c\/li\u003e\n\u003cli\u003eImproved resistance to heat fade at higher speeds\u003c\/li\u003e\n\u003cli\u003eSuits modern Euro and Asian models alike\u003c\/li\u003e\n\u003cli\u003eECE R90 approved for all cars that require the European legislation compliance\u003c\/li\u003e\n\u003cli\u003eRed brake-in surface coating accelerates pad brake in after install\u003c\/li\u003e\n\u003cli\u003eFeatures red “brake in’ surface coating for instant safe braking after install\u003c\/li\u003e\n\u003cli\u003ePads made with the Nucap NRS hook technology to ensure 100% secure pad bond\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eEBC Greenstuff™ 2000 has a high initial brake effect and gives drivers confidence from first application of the brake pedal. There is no such thing as a no dust pad. The very nature of how a brake works requires that some dust be generated to avoid rotor vibration (shimmying). The EBC pad creates less dust and dust is more easily washed off than most. All pads create more dust as they are bedding in especially if rotors are worn. Nominal friction coefficient 0.55. For heavier faster cars we strongly recommend Redstuff which does offer much less dust.\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eEBC Greenstuff 6000 Series features:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eAn excellent solution for 4×4 and light truck use, this heavy-duty Greenstuff™ Elite brake pad has the benefit of longer life and better resistance to off-road conditions of dust and sand etc. It has an extremely low rotor wear factor and a medium-to-good lifetime.\u003c\/span\u003e\u003cspan class=\"apple-converted-space\"\u003e \u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSuperb daily driver R90 type approved pad.\u003c\/li\u003e\n\u003cli\u003eFeatures red “brake in’ surface coating for instant safe braking after install.\u003c\/li\u003e\n\u003cli\u003eNew 100 % ECO friendly material with ZERO sulphides.\u003c\/li\u003e\n\u003cli\u003eNo shims for noise reduction needed.\u003c\/li\u003e\n\u003cli\u003eMore bite from cold.\u003c\/li\u003e\n\u003cli\u003eWorks in hot and dry climates as well as in cold.\u003c\/li\u003e\n\u003cli\u003eFully R90 approved as was the original Ultimax grade.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eUltimax offers great value for money and first class driving safety.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eA direct equivalent to OE brake pads\u003c\/li\u003e\n\u003cli\u003eSuitable for general public highway use in hot and cold climates\u003c\/li\u003e\n\u003cli\u003eEBC's quietest pad formulation for silent braking\u003c\/li\u003e\n\u003cli\u003eProgressive braking feel with excellent cold friction\u003c\/li\u003e\n\u003cli\u003eBrake-In™ coating for accelerated pad bed in period\u003c\/li\u003e\n\u003cli\u003eR90 approved thus legal for public highway use in European markets\u003c\/li\u003e\n\u003cli\u003eMade with Nucap NRS hooks on back plates to totally eliminate the chance of pad debond\u003c\/li\u003e\n\u003cli\u003eNot suitable for track use\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow to Bed-in EBC Greenstuff™ Brake Pads\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eEBC brake pads are now mostly self bedding. The Ultimax2, Greenstuff, \u003c\/span\u003e\u003cspan\u003eRed\u003c\/span\u003e\u003cspan\u003estuff, and \u003c\/span\u003e\u003cspan\u003eYellowstuff compound grades come with a brake-in coating that scrubs the rotor surface, accelerates pad seating times, and provides a strong brake effect for the first 100 miles of use as the brake pads seat themselves. After the first 100 miles or so, unless you are going to drive aggressively, there is nothing more to do meaning – most drivers happily use and enjoy their brake’s excellent performance for tens of thousands of miles after this point. If that’s your way of driving, nothing more needs to be explained. Just enjoy your brakes.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFast street driving\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eIf you drive aggressively or in a “Spirited” fashion on roads where it is safe to do so, after seating the pads to your rotors and certainly not before 300 miles of use , you should be prepared for the brake pad to emit an odour or even exhibit some smoke as the pads burn off what EBC call “surface volatiles”.\u003c\/p\u003e\n\u003cp\u003eMany faster drivers experience this in harder braking and criticize the brake pad whereas in fact, this is only part of the final high-end bedding-in process as the pads see rotors temps of 400-500C for the first time (not normal in everyday driving).\u003c\/p\u003e\n\u003cp\u003e\u003cspan data-mce-fragment=\"1\"\u003eOnce seated, any organic brake pad made by EBC performs better once the pad goes through heat curing or what EBC call “Green Fade” which happens during its first severe use. The green fade point is 400C\/650F. There are two ways to know if you have passed the green fade point – one is via the use of heat paints, the second way is to guess. So heat paints are the better option.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eYou should drive with caution until bedded flat and you have passed this green fade point at least twice and then allowed the brake pads to cool so the disc is below 100C.\u003c\/p\u003e\n\u003ch3\u003e\u003c\/h3\u003e\n\u003cp\u003enote: image is for illustration purposes and may differ on delivery.\u003c\/p\u003e","brand":"EBC","offers":[{"title":"Default Title","offer_id":58232304337241,"sku":"DP2885\/2","price":82.27,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0933\/7765\/9225\/files\/Greenstuff-pads_d72e09b4-06c1-480e-8a14-ed3be0068c53.jpg?v=1745257900"},{"product_id":"ebc-yellowstuff-brake-pads-front-lotus-exige-s1-s2","title":"EBC Yellowstuff Brake Pads (FRONT) - Lotus Exige S1\/S2","description":"\u003cp\u003eEven as EBC's world number 1 selling pad grade, the EBC Yellowstuff 3068 compound is new for 2021 and is designed where great stopping power is your goal on fast street use on modern sedans and hot hatches. 100% R90 approved.\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eA high friction pad that works from cold and self seats after installation due to its applied brake-in surface coating. Although the new Yellow grade WILL work fine under shorter duration track, trackday (lapping) use on lighter cars or drifting, \u003c\/span\u003eit does take longer to bed in, and if track driving\u003cspan\u003e is your main purpose, choose Bluestuff or the new RP1 and RPX ranges, or allow extra time for bedding your brakes in.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eEBC Yellowstuff are ECE Brake safety tested, which means they must work perfectly from cold at be at least as good or better than stock pads. When Yellowstuff see some heat (which is not tested for in the ECE R90 brake safety regulations) they really show their pedigree. On Japanese cars built with lower friction FF-rated pads these deliver a full grade higher stopping and on German cars built with GG these are about the only aftermarket pads that will match or beat the pretty good German OE spec pads and that takes some doing.\u003c\/p\u003e\n\u003cp\u003eHigh-efficiency performance pad for high friction and improved stopping power. Not only a high friction pad but very resistant to heat and lots of heavy braking means that Yellowstuff has been used with great success in fast street cars and Police vehicle brakes alike.\u003c\/p\u003e\n\u003cp\u003eEBC Yellowstuff was upgraded during 2021 to remove copper from the mix to comply with environmental legislations and as the new mix lasts longer it is not now being suggested as a track material due to the longer bedding in process required. On the street, bedding happens naturally in the first 100-200 miles of urban use but for those drivers wishing to arrive at the track with new pads and enjoy their day, our current suggestion is to use the Bluestuff formulation for track day driving both front and rear.\u003c\/p\u003e\n\u003cp\u003eBecause of its huge heat range, the applications where EBC Yellowstuff will deliver benefits range from fastest street use on higher horsepower cars on most street-based cars and even as a brake upgrade on Trucks and SUV. Yellowstuff is especially appreciated on Trucks for towing and heavy loads and where wheel and tire oversize upgrades have been fitted. In trackday\/drift\/hillclimb races where earlier Yellow blends were suggested, although track capable, is no longer recommended for track use on most cars due to its long bed-in process. BlueStuff is now EBC's recommended entry-level race pad for all cars, which as a track hybrid is still great on the street and even better on track.\u003c\/p\u003e\n\u003cp\u003eWhen considering full-race use on lighter cars, Yellowstuff has been a strong favorite. It is also the choice of 90% of the Mazda MX5 Miata competitors in the UK race series, used  in drifting and on kit cars. EBC Yellowstuff pads are also used on the UK Silverstone Race Track Drivers experience cars because of their high performance and longevity.  Yellowstuff also claimed a win in the Targa rally and for two years running in the Brazil Mitsubishi off Road Team Desert Challenge.\u003c\/p\u003e\n\u003cp\u003eThe majority of UK Police forces use and love EBC Yellowstuff brake pads. EBC has extended fleet miles and reduced their fleet operating costs by allowing Police Chase cars to drive harder and longer in blue light events. These Police forces have been using EBC Yellowstuff for almost three years now and not one force has had an issue that has caused them to stop buying, they just want more of this fantastic brake product!\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBrake Pad Features:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eHigh friction formula improves brake effect by 15%\u003c\/li\u003e\n\u003cli\u003eOur flagship top selling high friction brake pad for improved braking – UK made and a very high-end pad\u003c\/li\u003e\n\u003cli\u003eSuitable for Fast streetcars, trucks and SUVs wherever a decent brake power upgrade is required.\u003c\/li\u003e\n\u003cli\u003eSuper quiet smooth braking under all conditions, fully shimmed slotted and chamfered construction\u003c\/li\u003e\n\u003cli\u003eExcellent cold bite coupled with high-temperature fade resistance\u003c\/li\u003e\n\u003cli\u003eProgressive braking with unparalleled pedal feel\u003c\/li\u003e\n\u003cli\u003eDrastically reduced stopping distances compared to OE\u003c\/li\u003e\n\u003cli\u003eBrake-In™ coating for accelerated pad bed in period\u003c\/li\u003e\n\u003cli\u003eR90 approved thus legal for public highway use in European markets\u003c\/li\u003e\n\u003cli\u003eFor track use Bluestuff may be a better choice due to bedding in speed which is much shorter with Blue\u003c\/li\u003e\n\u003cli\u003eMade with Nucap NRS hooks on back plates to totally eliminate the chance of pad debond\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eHow to Bed-in EBC Yellowstuff™ Brake Pads\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eEBC brake pads are now mostly self bedding, but for extreme street use please read below.\u003c\/p\u003e\n\u003cp\u003eThe Ultimax2, Greenstuff, Redstuff, and \u003cspan data-mce-fragment=\"1\"\u003eYellow\u003c\/span\u003estuff compound grades come with a brake-in coating that scrubs the rotor surface, accelerates pad seating times, and provides a strong brake effect for the first 100 miles of use as the brake pads seat themselves. After the first 100 miles or so, unless you are going to drive aggressively, there is nothing more to do meaning – most drivers happily use and enjoy their brake’s excellent performance for tens of thousands of miles after this point. If that’s your way of driving, nothing more needs to be explained. Just enjoy your brakes.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFast street driving\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eIf you drive aggressively or in a “Spirited” fashion on roads where it is safe to do so, after seating the pads to your rotors and certainly not before 300 miles of use , you should be prepared for the brake pad to emit an odour or even exhibit some smoke as the pads burn off what EBC call “surface volatiles”.\u003c\/p\u003e\n\u003cp\u003eMany faster drivers experience this in harder braking and criticize the brake pad whereas in fact, this is only part of the final high-end bedding-in process as the pads see rotors temps of 400-500C for the first time (not normal in everyday driving).\u003c\/p\u003e\n\u003cp\u003e\u003cspan data-mce-fragment=\"1\"\u003eOnce seated, any organic brake pad made by EBC performs better once the pad goes through heat curing or what EBC call “Green Fade” which happens during its first severe use. The green fade point is 400C\/650F. There are two ways to know if you have passed the green fade point – one is via the use of heat paints, the second way is to guess. So heat paints are the better option.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eYou should drive with caution until bedded flat and you have passed this green fade point at least twice and then allowed the brake pads to cool so the disc is below 100C.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFast Street use Pre-bed\u003cbr\u003e\u003cbr\u003eFADE 1\u003c\/strong\u003e – drive 50 to 100 miles on Public road\/highway normal driving to allow the pads to mate up to the disc and establish full contact followed by 8 stops from 80 mph to 30 mph at 300-yard intervals and then coasting allowing the brakes to cool.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWanting to use Yellowstuff on the track?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003c\/strong\u003eEBC Yellowstuff are no longer optimum for track use. Bed in times are simply too long to be acceptable. Having said that if you LIKE Yellowstuff and want to use them at the track be prepared for the longer bed-in times detailed below.\u003c\/p\u003e\n\u003cp\u003eYellowstuff, although track-capable, is no longer recommended for track use on most cars due to its long bed-in the process. Bluestuff is now EBC's recommended entry-level race pad for all vehicles, which as a track hybrid is still great on the street and even better on track. But if you are to use Yellowstuff on the track, follow the below Fade procedures;\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFADE 2 \u003c\/strong\u003e– After the basic street pre-bed above is performed on the road or at the track if installed there …..Perform 10 medium pressure snubs at the track from 80-20mph leaving 300 meters between each snub (approx 0.4g decel). Allow pads to cool for 15 minutes minimum after coasting to the pits allowing brakes to cool a little.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFADE 3 \u003c\/strong\u003e– Perform 6 high-pressure snubs from 90-20mph with a maximum acceleration between consecutive snubs. (approx 0.8g decel, or 80% of an emergency stop). Allow the brakes to fully cool for a minimum of 1 hour before the race session. EBC advise using disc heat paint to ensure green fade is avoided.\u003c\/p\u003e\n\u003cp\u003enote: image is for illustration purposes and may differ on delivery.\u003c\/p\u003e","brand":"EBC","offers":[{"title":"Default Title","offer_id":58232386486617,"sku":"DP4197\/2R","price":102.97,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0933\/7765\/9225\/files\/Yellowstuff-pads_731c6bc1-43de-4444-bf55-a4c453e60d95.jpg?v=1745257881"},{"product_id":"ebc-yellowstuff-brake-pads-rear-lotus-exige-s1-s2","title":"EBC Yellowstuff Brake Pads (REAR) - Lotus Exige S1\/S2","description":"\u003cp\u003eEven as EBC's world number 1 selling pad grade, the EBC Yellowstuff 3068 compound is new for 2021 and is designed where great stopping power is your goal on fast street use on modern sedans and hot hatches. 100% R90 approved.\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eA high friction pad that works from cold and self seats after installation due to its applied brake-in surface coating. Although the new Yellow grade WILL work fine under shorter duration track, trackday (lapping) use on lighter cars or drifting, \u003c\/span\u003eit does take longer to bed in, and if track driving\u003cspan\u003e is your main purpose, choose Bluestuff or the new RP1 and RPX ranges, or allow extra time for bedding your brakes in.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eEBC Yellowstuff are ECE Brake safety tested, which means they must work perfectly from cold at be at least as good or better than stock pads. When Yellowstuff see some heat (which is not tested for in the ECE R90 brake safety regulations) they really show their pedigree. On Japanese cars built with lower friction FF-rated pads these deliver a full grade higher stopping and on German cars built with GG these are about the only aftermarket pads that will match or beat the pretty good German OE spec pads and that takes some doing.\u003c\/p\u003e\n\u003cp\u003eHigh-efficiency performance pad for high friction and improved stopping power. Not only a high friction pad but very resistant to heat and lots of heavy braking means that Yellowstuff has been used with great success in fast street cars and Police vehicle brakes alike.\u003c\/p\u003e\n\u003cp\u003eEBC Yellowstuff was upgraded during 2021 to remove copper from the mix to comply with environmental legislations and as the new mix lasts longer it is not now being suggested as a track material due to the longer bedding in process required. On the street, bedding happens naturally in the first 100-200 miles of urban use but for those drivers wishing to arrive at the track with new pads and enjoy their day, our current suggestion is to use the Bluestuff formulation for track day driving both front and rear.\u003c\/p\u003e\n\u003cp\u003eBecause of its huge heat range, the applications where EBC Yellowstuff will deliver benefits range from fastest street use on higher horsepower cars on most street-based cars and even as a brake upgrade on Trucks and SUV. Yellowstuff is especially appreciated on Trucks for towing and heavy loads and where wheel and tire oversize upgrades have been fitted. In trackday\/drift\/hillclimb races where earlier Yellow blends were suggested, although track capable, is no longer recommended for track use on most cars due to its long bed-in process. BlueStuff is now EBC's recommended entry-level race pad for all cars, which as a track hybrid is still great on the street and even better on track.\u003c\/p\u003e\n\u003cp\u003eWhen considering full-race use on lighter cars, Yellowstuff has been a strong favorite. It is also the choice of 90% of the Mazda MX5 Miata competitors in the UK race series, used  in drifting and on kit cars. EBC Yellowstuff pads are also used on the UK Silverstone Race Track Drivers experience cars because of their high performance and longevity.  Yellowstuff also claimed a win in the Targa rally and for two years running in the Brazil Mitsubishi off Road Team Desert Challenge.\u003c\/p\u003e\n\u003cp\u003eThe majority of UK Police forces use and love EBC Yellowstuff brake pads. EBC has extended fleet miles and reduced their fleet operating costs by allowing Police Chase cars to drive harder and longer in blue light events. These Police forces have been using EBC Yellowstuff for almost three years now and not one force has had an issue that has caused them to stop buying, they just want more of this fantastic brake product!\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBrake Pad Features:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eHigh friction formula improves brake effect by 15%\u003c\/li\u003e\n\u003cli\u003eOur flagship top selling high friction brake pad for improved braking – UK made and a very high-end pad\u003c\/li\u003e\n\u003cli\u003eSuitable for Fast streetcars, trucks and SUVs wherever a decent brake power upgrade is required.\u003c\/li\u003e\n\u003cli\u003eSuper quiet smooth braking under all conditions, fully shimmed slotted and chamfered construction\u003c\/li\u003e\n\u003cli\u003eExcellent cold bite coupled with high-temperature fade resistance\u003c\/li\u003e\n\u003cli\u003eProgressive braking with unparalleled pedal feel\u003c\/li\u003e\n\u003cli\u003eDrastically reduced stopping distances compared to OE\u003c\/li\u003e\n\u003cli\u003eBrake-In™ coating for accelerated pad bed in period\u003c\/li\u003e\n\u003cli\u003eR90 approved thus legal for public highway use in European markets\u003c\/li\u003e\n\u003cli\u003eFor track use Bluestuff may be a better choice due to bedding in speed which is much shorter with Blue\u003c\/li\u003e\n\u003cli\u003eMade with Nucap NRS hooks on back plates to totally eliminate the chance of pad debond\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eHow to Bed-in EBC Yellowstuff™ Brake Pads\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eEBC brake pads are now mostly self bedding, but for extreme street use please read below.\u003c\/p\u003e\n\u003cp\u003eThe Ultimax2, Greenstuff, Redstuff, and \u003cspan data-mce-fragment=\"1\"\u003eYellow\u003c\/span\u003estuff compound grades come with a brake-in coating that scrubs the rotor surface, accelerates pad seating times, and provides a strong brake effect for the first 100 miles of use as the brake pads seat themselves. After the first 100 miles or so, unless you are going to drive aggressively, there is nothing more to do meaning – most drivers happily use and enjoy their brake’s excellent performance for tens of thousands of miles after this point. If that’s your way of driving, nothing more needs to be explained. Just enjoy your brakes.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFast street driving\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eIf you drive aggressively or in a “Spirited” fashion on roads where it is safe to do so, after seating the pads to your rotors and certainly not before 300 miles of use , you should be prepared for the brake pad to emit an odour or even exhibit some smoke as the pads burn off what EBC call “surface volatiles”.\u003c\/p\u003e\n\u003cp\u003eMany faster drivers experience this in harder braking and criticize the brake pad whereas in fact, this is only part of the final high-end bedding-in process as the pads see rotors temps of 400-500C for the first time (not normal in everyday driving).\u003c\/p\u003e\n\u003cp\u003e\u003cspan data-mce-fragment=\"1\"\u003eOnce seated, any organic brake pad made by EBC performs better once the pad goes through heat curing or what EBC call “Green Fade” which happens during its first severe use. The green fade point is 400C\/650F. There are two ways to know if you have passed the green fade point – one is via the use of heat paints, the second way is to guess. So heat paints are the better option.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eYou should drive with caution until bedded flat and you have passed this green fade point at least twice and then allowed the brake pads to cool so the disc is below 100C.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFast Street use Pre-bed\u003cbr\u003e\u003cbr\u003eFADE 1\u003c\/strong\u003e – drive 50 to 100 miles on Public road\/highway normal driving to allow the pads to mate up to the disc and establish full contact followed by 8 stops from 80 mph to 30 mph at 300-yard intervals and then coasting allowing the brakes to cool.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWanting to use Yellowstuff on the track?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003c\/strong\u003eEBC Yellowstuff are no longer optimum for track use. Bed in times are simply too long to be acceptable. Having said that if you LIKE Yellowstuff and want to use them at the track be prepared for the longer bed-in times detailed below.\u003c\/p\u003e\n\u003cp\u003eYellowstuff, although track-capable, is no longer recommended for track use on most cars due to its long bed-in the process. Bluestuff is now EBC's recommended entry-level race pad for all vehicles, which as a track hybrid is still great on the street and even better on track. But if you are to use Yellowstuff on the track, follow the below Fade procedures;\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFADE 2 \u003c\/strong\u003e– After the basic street pre-bed above is performed on the road or at the track if installed there …..Perform 10 medium pressure snubs at the track from 80-20mph leaving 300 meters between each snub (approx 0.4g decel). Allow pads to cool for 15 minutes minimum after coasting to the pits allowing brakes to cool a little.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFADE 3 \u003c\/strong\u003e– Perform 6 high-pressure snubs from 90-20mph with a maximum acceleration between consecutive snubs. (approx 0.8g decel, or 80% of an emergency stop). Allow the brakes to fully cool for a minimum of 1 hour before the race session. EBC advise using disc heat paint to ensure green fade is avoided.\u003c\/p\u003e\n\u003cp\u003enote: image is for illustration purposes and may differ on delivery.\u003c\/p\u003e","brand":"EBC","offers":[{"title":"Default Title","offer_id":58232391270745,"sku":"DP4885\/2R","price":111.54,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0933\/7765\/9225\/files\/Yellowstuff-pads_731c6bc1-43de-4444-bf55-a4c453e60d95.jpg?v=1745257881"},{"product_id":"ebc-bluestuff-brake-pads-rear-lotus-exige-s1-s2","title":"EBC Bluestuff Brake Pads (REAR) - Lotus Exige S1\/S2","description":"\u003cp\u003eBluestuff NDX is a high friction sport and race pad that now has R90 approval on almost all fitments for the EU and is therefore totally street legal.\u003cbr\u003e\u003cbr\u003eBluestuff has been used for several seasons in BMW Cup racing with shorter duration and is the EBC Track-day recommended pad. For longer races see the EBC RP or SR ranges. Bluestuff is a popular upgrade brake pad for heavier SUV and 4x4 in street use because of its incredible braking power and high fade resistance and is very popular even on armored street vehicles.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eBluestuff is an entry-level trackday and race pad that has good street manners and is actually R90 approved for street driving. There are two compounds within the Bluestuff range Bluestuff NDX with higher friction of 0.52 Mu and new Bluestuff B with lower friction of 0.42 Mu.\u003c\/p\u003e\n\u003cp\u003eHowever, due to Bluestuff having excellent cold friction and being very controllable, this compound has quickly become the brake pad of choice for performance road car drivers in USA and Asia markets where R90 homologation does not apply. More recently, EBC is pleased to announce that Bluestuff has passed extensive road-focused testing and gained R90 approval on almost all part numbers, making it unique in being the first truly track-focused pad that is also perfectly legal for use on public roads across Europe. There is no requirement for E.U. customers to inform their insurance company following the fitment of R90 approved pads.\u003c\/p\u003e\n\u003cp\u003eFor customers with experience with EBC’s widely acclaimed Yellowstuff material, Bluestuff boasts a similar friction profile but with a usefully higher friction coefficient across the now larger working range, feeling much like you’d imagine Yellowstuff to feel after a double hit of espresso. Bluestuff has the added benefit of much faster bed in time has a high friction coefficient without feeling grabby, taking things up a notch from EBC’s Yellowstuff material by bringing superb pedal modulation to a trackpad with even greater fade resistance.\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThe target use is for all types of fast and heavier cars in performance and race driving with a much enhanced lifetime over EBC's previous Yellowstuff grade pads.\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eR\u0026amp;D Manager Steve Payne checks out the first batch of the Bluestuff NDX material made with a revolutionary process to produce the highly acclaimed EBC Bluestuff NDX Race Pads. The process involves 5 steps never before used in friction materials and sets EBC Brakes firmly in the lead as a provider of brake friction.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eA great choice for turn-up and race track events due to its short bed in time and medium plus lifetime. This compound has been the choice of the BMW cup series for several seasons.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBrake Pad Features:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e0.52μ stable friction once bedded\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eStrong initial bite, work from cold\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eZero rotor damage\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eCopper free for ECO compliance\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eExcellent upgrade pad for SUV and armoured vehicles in street use\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eR90 approved thus legal for public highway use in European markets\u003c\/li\u003e\n\u003cli\u003eMade with Nucap NRS hooks on back plates to totally eliminate the chance of pad debond\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eHow to Bed-in EBC Bluestuff™ Brake Pads\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003ePerform the street pre-bed Fade 1 routine as below (either on the road or at the track if installed there ) followed by Fade 2 at the race track. The latest Bluestuff DM3362 and Low Mu versions should only take Fade 2 and a 15 minute cooling time to be ready to race.\u003cbr\u003e\u003cbr\u003eFade 3 should not be necessary unless poor disc condition has prevented proper seating but if you have time DO perform Fade 3.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFast Street use Pre-bed\u003cbr\u003e\u003cbr\u003eFADE 1\u003c\/strong\u003e – drive 50 to 100 miles on Public road\/highway normal driving to allow the pads to mate up to the disc and establish full contact followed by 8 stops from 80 mph to 30 mph at 300-yard intervals and then coasting allowing the brakes to cool.\u003cbr\u003e\u003cbr\u003e\u003cstrong data-mce-fragment=\"1\"\u003eTrack\/Race Pre-bed\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFADE 2 \u003c\/strong\u003e– After the basic street pre-bed above is performed on the road or at the track if installed there …..Perform 10 medium pressure snubs at the track from 80-20mph leaving 300 meters between each snub (approx 0.4g decel). Allow pads to cool for 15 minutes minimum after coasting to the pits allowing brakes to cool a little.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFADE 3 \u003c\/strong\u003e– Perform 6 high-pressure snubs from 90-20mph with a maximum acceleration between consecutive snubs. (approx 0.8g decel, or 80% of an emergency stop). Allow the brakes to fully cool for a minimum of 1 hour before the race session. EBC advise using disc heat paint to ensure green fade is avoided.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003enote: image is for illustration purposes and may differ on delivery.\u003c\/p\u003e","brand":"EBC","offers":[{"title":"Default Title","offer_id":58232442519897,"sku":"DP5885\/2B","price":117.12,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0933\/7765\/9225\/files\/Bluestuff-pads_2eb427d1-fdb1-497c-a4f0-21a8cf2fd9f9.jpg?v=1745257871"},{"product_id":"ebc-bluestuff-brake-pads-front-lotus-exige-s1-s2","title":"EBC Bluestuff Brake Pads (FRONT) - Lotus Exige S1\/S2","description":"\u003cp\u003eBluestuff NDX is a high friction sport and race pad that now has R90 approval on almost all fitments for the EU and is therefore totally street legal.\u003cbr\u003e\u003cbr\u003eBluestuff has been used for several seasons in BMW Cup racing with shorter duration and is the EBC Track-day recommended pad. For longer races see the EBC RP or SR ranges. Bluestuff is a popular upgrade brake pad for heavier SUV and 4x4 in street use because of its incredible braking power and high fade resistance and is very popular even on armored street vehicles.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eBluestuff is an entry-level trackday and race pad that has good street manners and is actually R90 approved for street driving. There are two compounds within the Bluestuff range Bluestuff NDX with higher friction of 0.52 Mu and new Bluestuff B with lower friction of 0.42 Mu.\u003c\/p\u003e\n\u003cp\u003eHowever, due to Bluestuff having excellent cold friction and being very controllable, this compound has quickly become the brake pad of choice for performance road car drivers in USA and Asia markets where R90 homologation does not apply. More recently, EBC is pleased to announce that Bluestuff has passed extensive road-focused testing and gained R90 approval on almost all part numbers, making it unique in being the first truly track-focused pad that is also perfectly legal for use on public roads across Europe. There is no requirement for E.U. customers to inform their insurance company following the fitment of R90 approved pads.\u003c\/p\u003e\n\u003cp\u003eFor customers with experience with EBC’s widely acclaimed Yellowstuff material, Bluestuff boasts a similar friction profile but with a usefully higher friction coefficient across the now larger working range, feeling much like you’d imagine Yellowstuff to feel after a double hit of espresso. Bluestuff has the added benefit of much faster bed in time has a high friction coefficient without feeling grabby, taking things up a notch from EBC’s Yellowstuff material by bringing superb pedal modulation to a trackpad with even greater fade resistance.\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThe target use is for all types of fast and heavier cars in performance and race driving with a much enhanced lifetime over EBC's previous Yellowstuff grade pads.\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eR\u0026amp;D Manager Steve Payne checks out the first batch of the Bluestuff NDX material made with a revolutionary process to produce the highly acclaimed EBC Bluestuff NDX Race Pads. The process involves 5 steps never before used in friction materials and sets EBC Brakes firmly in the lead as a provider of brake friction.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eA great choice for turn-up and race track events due to its short bed in time and medium plus lifetime. This compound has been the choice of the BMW cup series for several seasons.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBrake Pad Features:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e0.52μ stable friction once bedded\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eStrong initial bite, work from cold\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eZero rotor damage\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eCopper free for ECO compliance\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eExcellent upgrade pad for SUV and armoured vehicles in street use\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eR90 approved thus legal for public highway use in European markets\u003c\/li\u003e\n\u003cli\u003eMade with Nucap NRS hooks on back plates to totally eliminate the chance of pad debond\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eHow to Bed-in EBC Bluestuff™ Brake Pads\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003ePerform the street pre-bed Fade 1 routine as below (either on the road or at the track if installed there ) followed by Fade 2 at the race track. The latest Bluestuff DM3362 and Low Mu versions should only take Fade 2 and a 15 minute cooling time to be ready to race.\u003cbr\u003e\u003cbr\u003eFade 3 should not be necessary unless poor disc condition has prevented proper seating but if you have time DO perform Fade 3.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFast Street use Pre-bed\u003cbr\u003e\u003cbr\u003eFADE 1\u003c\/strong\u003e – drive 50 to 100 miles on Public road\/highway normal driving to allow the pads to mate up to the disc and establish full contact followed by 8 stops from 80 mph to 30 mph at 300-yard intervals and then coasting allowing the brakes to cool.\u003cbr\u003e\u003cbr\u003e\u003cstrong data-mce-fragment=\"1\"\u003eTrack\/Race Pre-bed\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFADE 2 \u003c\/strong\u003e– After the basic street pre-bed above is performed on the road or at the track if installed there …..Perform 10 medium pressure snubs at the track from 80-20mph leaving 300 meters between each snub (approx 0.4g decel). Allow pads to cool for 15 minutes minimum after coasting to the pits allowing brakes to cool a little.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFADE 3 \u003c\/strong\u003e– Perform 6 high-pressure snubs from 90-20mph with a maximum acceleration between consecutive snubs. (approx 0.8g decel, or 80% of an emergency stop). Allow the brakes to fully cool for a minimum of 1 hour before the race session. EBC advise using disc heat paint to ensure green fade is avoided.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003enote: image is for illustration purposes and may differ on delivery.\u003c\/p\u003e","brand":"EBC","offers":[{"title":"Default Title","offer_id":58232443765081,"sku":"DP5197\/2NDX","price":107.14,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0933\/7765\/9225\/files\/Bluestuff-pads_2eb427d1-fdb1-497c-a4f0-21a8cf2fd9f9.jpg?v=1745257871"},{"product_id":"ebc-rp-x-racing-brake-pads-front-lotus-exige-s1-s2","title":"EBC RP-X Racing Brake Pads (FRONT) - Lotus Exige S1\/S2","description":"\u003cp\u003eFollowing the hugely successful launch of RP-1™, EBC Brakes Racing increases its Motorsport brake pad range with the introduction of our latest ultra-high-performance track \u0026amp; race material, RP-X™.\u003cbr\u003e\u003cbr\u003eDesigned for vehicles driven hard on track, RP-X™ possesses a high friction level of 0.55 between 0-750°C (Ambient-1400°F) and achieves a 100% brake effect from cold. This makes RP-X™ an excellent choice for sprint racing or hill climb events, where full brake performance is essential without requiring any ‘warming up’, but also makes RP-X™ well suited to any type of circuit use where a high initial bite and powerful brake response is desirable.\u003cbr\u003e\u003cbr\u003eEBC Racing would like to emphasise that it is not a case of RP-X™ being ‘better’ than RP-1™, rather it is ‘different’ and designed to provide a distinctly different response characteristic (more aggressive bite) which some drivers may prefer.\u003cbr\u003e\u003cbr\u003eRP-X™ also boasts a flat friction response and is capable of operating at temperatures of up to 750°C without brake fade, yet has a slightly higher average friction of 0.55mu. RP-X™’s higher friction level provides a stronger initial bite and more power under braking, all for a reduced pedal effort compared to RP-1™.\u003cbr\u003e\u003cbr\u003eIf you’ve experienced some of the leading track\/race compounds from EBC’s competitors (such as Pagid RS29, Ferodo DS 1.11 or Endless ME20) then RP-X™ will feel very similar in its response characteristic. The higher friction level and higher initial bite mean RP-X™ is well suited to under-servo’d vehicles (for example: Nissan GT-R R35 and Porsche GT models).\u003cbr\u003e\u003cbr\u003eOn these inherently under-servo’d vehicles the brake system is naturally more progressive and feelsome, therefore a more aggressive pad material such as RP-X™ is preferable to keep pedal travel within the optimum displacement range. However, the extra power served up by RP-X™ isn’t at the expense of exceptional feel during the braking phase, with the material still allowing the driver to modulate the brake pedal with ease and explore the limits in each and every braking zone.\u003cbr\u003e\u003cbr\u003eSimilarly, dedicated track\/race cars that employ aftermarket master cylinders, anti-roll bars and bias adjusters would also be well suited to running RP-X™, since these components allow the driver to fine tune the brake bias to permit the use of a naturally more aggressive pad material.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBrake Pad Features:\u003cbr\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eHigh friction level of 0.55 between 0-750°C (0-1400°F)\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eCapable of operating at temperatures of up to 750C without brake fade.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eMade 100% in EBC Brakes’ Bristol, UK pad factory\u003cbr\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eStainless steel backing plates (reduced heat conduction, no paint)\u003cbr\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eBackplates feature Nucap® NRS® hook pad retention system\u003cbr\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eGood pad life with excellent disc life\u003cbr\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eNOT R90 approved for road use in European markets\u003cbr\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eMade with Nucap NRS hooks on backplates to totally eliminate the chance of pad debond\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eHow to Bed-in EBC RP-1\/RP-X Brake Pads\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNo street pre-bed needed. RP brake pads don’t need to “Warm-up” and are as good as or better than most stock pads in lower-speed highway driving. Full potential comes though when you really work these pads though and that is why they are classed as a race pad.\u003cbr\u003e\u003cbr\u003e\u003cstrong data-mce-fragment=\"1\"\u003eTrack\/Race Pre-bed\u003cbr\u003e\u003cbr\u003e\u003c\/strong\u003eFor optimum performance perform a single gentle lap to seat brake pads to rotors, followed by fade 3 as below.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFADE 3 \u003c\/strong\u003e– Perform 6 high-pressure snubs from 90-20mph with a maximum acceleration between consecutive snubs. (approx 0.8g decel, or 80% of an emergency stop). Allow the brakes to fully cool for a minimum of 1 hour before the race session. EBC advise using disc heat paint to ensure green fade is avoided.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003enote: image is for illustration purposes and may differ on delivery.\u003c\/p\u003e","brand":"EBC","offers":[{"title":"Default Title","offer_id":58232456249689,"sku":"DP8197\/2RPX","price":173.3,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0933\/7765\/9225\/files\/RPX_6bbb779d-8acf-4043-a50b-11c4bb5040aa.png?v=1745271835"},{"product_id":"ebc-rp-x-racing-brake-pads-rear-lotus-exige-s1-s2","title":"EBC RP-X Racing Brake Pads (REAR) - Lotus Exige S1\/S2","description":"\u003cp\u003eFollowing the hugely successful launch of RP-1™, EBC Brakes Racing increases its Motorsport brake pad range with the introduction of our latest ultra-high-performance track \u0026amp; race material, RP-X™.\u003cbr\u003e\u003cbr\u003eDesigned for vehicles driven hard on track, RP-X™ possesses a high friction level of 0.55 between 0-750°C (Ambient-1400°F) and achieves a 100% brake effect from cold. This makes RP-X™ an excellent choice for sprint racing or hill climb events, where full brake performance is essential without requiring any ‘warming up’, but also makes RP-X™ well suited to any type of circuit use where a high initial bite and powerful brake response is desirable.\u003cbr\u003e\u003cbr\u003eEBC Racing would like to emphasise that it is not a case of RP-X™ being ‘better’ than RP-1™, rather it is ‘different’ and designed to provide a distinctly different response characteristic (more aggressive bite) which some drivers may prefer.\u003cbr\u003e\u003cbr\u003eRP-X™ also boasts a flat friction response and is capable of operating at temperatures of up to 750°C without brake fade, yet has a slightly higher average friction of 0.55mu. RP-X™’s higher friction level provides a stronger initial bite and more power under braking, all for a reduced pedal effort compared to RP-1™.\u003cbr\u003e\u003cbr\u003eIf you’ve experienced some of the leading track\/race compounds from EBC’s competitors (such as Pagid RS29, Ferodo DS 1.11 or Endless ME20) then RP-X™ will feel very similar in its response characteristic. The higher friction level and higher initial bite mean RP-X™ is well suited to under-servo’d vehicles (for example: Nissan GT-R R35 and Porsche GT models).\u003cbr\u003e\u003cbr\u003eOn these inherently under-servo’d vehicles the brake system is naturally more progressive and feelsome, therefore a more aggressive pad material such as RP-X™ is preferable to keep pedal travel within the optimum displacement range. However, the extra power served up by RP-X™ isn’t at the expense of exceptional feel during the braking phase, with the material still allowing the driver to modulate the brake pedal with ease and explore the limits in each and every braking zone.\u003cbr\u003e\u003cbr\u003eSimilarly, dedicated track\/race cars that employ aftermarket master cylinders, anti-roll bars and bias adjusters would also be well suited to running RP-X™, since these components allow the driver to fine tune the brake bias to permit the use of a naturally more aggressive pad material.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBrake Pad Features:\u003cbr\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eHigh friction level of 0.55 between 0-750°C (0-1400°F)\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eCapable of operating at temperatures of up to 750C without brake fade.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eMade 100% in EBC Brakes’ Bristol, UK pad factory\u003cbr\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eStainless steel backing plates (reduced heat conduction, no paint)\u003cbr\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eBackplates feature Nucap® NRS® hook pad retention system\u003cbr\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eGood pad life with excellent disc life\u003cbr\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eNOT R90 approved for road use in European markets\u003cbr\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eMade with Nucap NRS hooks on backplates to totally eliminate the chance of pad debond\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eHow to Bed-in EBC RP-1\/RP-X Brake Pads\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNo street pre-bed needed. RP brake pads don’t need to “Warm-up” and are as good as or better than most stock pads in lower-speed highway driving. Full potential comes though when you really work these pads though and that is why they are classed as a race pad.\u003cbr\u003e\u003cbr\u003e\u003cstrong data-mce-fragment=\"1\"\u003eTrack\/Race Pre-bed\u003cbr\u003e\u003cbr\u003e\u003c\/strong\u003eFor optimum performance perform a single gentle lap to seat brake pads to rotors, followed by fade 3 as below.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFADE 3 \u003c\/strong\u003e– Perform 6 high-pressure snubs from 90-20mph with a maximum acceleration between consecutive snubs. (approx 0.8g decel, or 80% of an emergency stop). Allow the brakes to fully cool for a minimum of 1 hour before the race session. EBC advise using disc heat paint to ensure green fade is avoided.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003enote: image is for illustration purposes and may differ on delivery.\u003c\/p\u003e","brand":"EBC","offers":[{"title":"Default Title","offer_id":58234492584281,"sku":"DP8885\/2RPX","price":160.84,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0933\/7765\/9225\/files\/RPX_6bbb779d-8acf-4043-a50b-11c4bb5040aa.png?v=1745271835"},{"product_id":"ebc-rp-1-racing-brake-pads-rear-lotus-exige-s1-s2","title":"EBC RP-1 Racing Brake Pads (REAR) - Lotus Exige S1\/S2","description":"\u003cp\u003eEBC Brakes Racing’s dedicated Motorsport pad RP-1™ pairs high-performance with unprecedented modulation and control, resulting in a track pad that feels uniquely different to the competition and allows drivers to extract every last tenth from each and every braking zone.\u003cbr\u003e\u003cbr\u003eDesigned for vehicles driven hard on track, RP-1™ possesses a moderately high friction level of 0.45 between 100-750°C (200-1400°F). The more progressive response characteristic of RP-1™ makes it well suited for inherently ‘over-servoed’ vehicles where a softer pad material is desirable to allow greater finesse when on the brakes.\u003cbr\u003e\u003cbr\u003eEBC Racing would like to emphasise that it is not a case of RP-1™ being ‘less good’ than RP-X™, rather it is ‘different’ and designed to provide a distinctly different response characteristic (less aggressive bite) which some drivers may prefer.\u003cbr\u003e\u003cbr\u003eRP-1™ boasts a flat friction response averaging 0.45mu and is capable of operating at temperatures of up to 750C without brake fade. However, unlike many other track\/race pad materials on the market, RP-1™ possesses a progressive\/benign response characteristic that provides an exceptional ‘feel’ during each and every braking event.\u003cbr\u003e\u003cbr\u003eThe slightly lower friction level of RP-1™ allows the brake pedal to be worked harder, which is particularly beneficial to cars that are over-servo’d from the factory (for example: Mk7 VW Golf GTI, BMW M cars, Audi RS models, etc). On inherently over-servo’d vehicles, RP-1™ somewhat negates the effect of the over-servo’d brake system setup, resulting in a more progressive and smooth response when driven on track.\u003cbr\u003e\u003cbr\u003eIn some modern vehicles, it can sometimes feel as if all the braking happens in the first inch of pedal travel. Whilst this sharp sensation gives the impression that the car has very ‘good’ brakes to the average driver pootling down to the shops, experienced track\/race drivers know that a hair-trigger brake response is undesirable, verging on totally unacceptable for smooth driving at the limit. A modest amount of brake pedal travel is actually beneficial for performance driving and this is exactly what RP-1™ enables, encouraging the driver to find the limit under braking whilst also enabling trail-braking.\u003cbr\u003e\u003cbr\u003eRP-1™ is particularly suitable for non-ABS assisted vehicles, where a smooth response is essential to avoid locking a wheel under braking. For heavy or inherently under‑servoed vehicles which suit a very aggressive pad, EBC Racing's other track material RP‑X may be preferable.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBrake Pad Features:\u003cbr\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eHigh friction level of 0.45 between 100-750°C (200-1400°F)\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eCapable of operating at temperatures of up to 750C without brake fade.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eMade 100% in EBC Brakes’ Bristol, UK pad factory\u003cbr\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eStainless steel backing plates (reduced heat conduction, no paint)\u003cbr\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eBackplates feature Nucap® NRS® hook pad retention system\u003cbr\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eGood pad life with excellent disc life\u003cbr\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eNOT R90 approved for road use in European markets\u003cbr\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eMade with Nucap NRS hooks on backplates to totally eliminate the chance of pad debond\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eHow to Bed-in EBC RP-1\/RP-X Brake Pads\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNo street pre-bed needed. RP brake pads don’t need to “Warm-up” and are as good as or better than most stock pads in lower-speed highway driving. Full potential comes though when you really work these pads though and that is why they are classed as a race pad.\u003cbr\u003e\u003cbr\u003e\u003cstrong data-mce-fragment=\"1\"\u003eTrack\/Race Pre-bed\u003cbr\u003e\u003cbr\u003e\u003c\/strong\u003eFor optimum performance perform a single gentle lap to seat brake pads to rotors, followed by fade 3 as below.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFADE 3 \u003c\/strong\u003e– Perform 6 high-pressure snubs from 90-20mph with a maximum acceleration between consecutive snubs. (approx 0.8g decel, or 80% of an emergency stop). Allow the brakes to fully cool for a minimum of 1 hour before the race session. EBC advise using disc heat paint to ensure green fade is avoided.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003enote: image is for illustration purposes and may differ on delivery.\u003c\/p\u003e","brand":"EBC","offers":[{"title":"Default Title","offer_id":58234516767065,"sku":"DP8885\/2RP1","price":148.37,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0933\/7765\/9225\/files\/RP1_d9125985-e160-4676-a1a7-84ea1f651544.jpg?v=1745271838"},{"product_id":"ebc-rp-1-racing-brake-pads-front-lotus-exige-s1-s2","title":"EBC RP-1 Racing Brake Pads (FRONT) - Lotus Exige S1\/S2","description":"\u003cp\u003eEBC Brakes Racing’s dedicated Motorsport pad RP-1™ pairs high-performance with unprecedented modulation and control, resulting in a track pad that feels uniquely different to the competition and allows drivers to extract every last tenth from each and every braking zone.\u003cbr\u003e\u003cbr\u003eDesigned for vehicles driven hard on track, RP-1™ possesses a moderately high friction level of 0.45 between 100-750°C (200-1400°F). The more progressive response characteristic of RP-1™ makes it well suited for inherently ‘over-servoed’ vehicles where a softer pad material is desirable to allow greater finesse when on the brakes.\u003cbr\u003e\u003cbr\u003eEBC Racing would like to emphasise that it is not a case of RP-1™ being ‘less good’ than RP-X™, rather it is ‘different’ and designed to provide a distinctly different response characteristic (less aggressive bite) which some drivers may prefer.\u003cbr\u003e\u003cbr\u003eRP-1™ boasts a flat friction response averaging 0.45mu and is capable of operating at temperatures of up to 750C without brake fade. However, unlike many other track\/race pad materials on the market, RP-1™ possesses a progressive\/benign response characteristic that provides an exceptional ‘feel’ during each and every braking event.\u003cbr\u003e\u003cbr\u003eThe slightly lower friction level of RP-1™ allows the brake pedal to be worked harder, which is particularly beneficial to cars that are over-servo’d from the factory (for example: Mk7 VW Golf GTI, BMW M cars, Audi RS models, etc). On inherently over-servo’d vehicles, RP-1™ somewhat negates the effect of the over-servo’d brake system setup, resulting in a more progressive and smooth response when driven on track.\u003cbr\u003e\u003cbr\u003eIn some modern vehicles, it can sometimes feel as if all the braking happens in the first inch of pedal travel. Whilst this sharp sensation gives the impression that the car has very ‘good’ brakes to the average driver pootling down to the shops, experienced track\/race drivers know that a hair-trigger brake response is undesirable, verging on totally unacceptable for smooth driving at the limit. A modest amount of brake pedal travel is actually beneficial for performance driving and this is exactly what RP-1™ enables, encouraging the driver to find the limit under braking whilst also enabling trail-braking.\u003cbr\u003e\u003cbr\u003eRP-1™ is particularly suitable for non-ABS assisted vehicles, where a smooth response is essential to avoid locking a wheel under braking. For heavy or inherently under‑servoed vehicles which suit a very aggressive pad, EBC Racing's other track material RP‑X may be preferable.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBrake Pad Features:\u003cbr\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eHigh friction level of 0.45 between 100-750°C (200-1400°F)\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eCapable of operating at temperatures of up to 750C without brake fade.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eMade 100% in EBC Brakes’ Bristol, UK pad factory\u003cbr\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eStainless steel backing plates (reduced heat conduction, no paint)\u003cbr\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eBackplates feature Nucap® NRS® hook pad retention system\u003cbr\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eGood pad life with excellent disc life\u003cbr\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eNOT R90 approved for road use in European markets\u003cbr\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eMade with Nucap NRS hooks on backplates to totally eliminate the chance of pad debond\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eHow to Bed-in EBC RP-1\/RP-X Brake Pads\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNo street pre-bed needed. RP brake pads don’t need to “Warm-up” and are as good as or better than most stock pads in lower-speed highway driving. Full potential comes though when you really work these pads though and that is why they are classed as a race pad.\u003cbr\u003e\u003cbr\u003e\u003cstrong data-mce-fragment=\"1\"\u003eTrack\/Race Pre-bed\u003cbr\u003e\u003cbr\u003e\u003c\/strong\u003eFor optimum performance perform a single gentle lap to seat brake pads to rotors, followed by fade 3 as below.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFADE 3 \u003c\/strong\u003e– Perform 6 high-pressure snubs from 90-20mph with a maximum acceleration between consecutive snubs. (approx 0.8g decel, or 80% of an emergency stop). Allow the brakes to fully cool for a minimum of 1 hour before the race session. EBC advise using disc heat paint to ensure green fade is avoided.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003enote: image is for illustration purposes and may differ on delivery.\u003c\/p\u003e","brand":"EBC","offers":[{"title":"Default Title","offer_id":58234580795737,"sku":"DP8197\/2RP1","price":160.84,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0933\/7765\/9225\/files\/RP1_d9125985-e160-4676-a1a7-84ea1f651544.jpg?v=1745271838"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0933\/7765\/9225\/collections\/rival-vehicle-lotus-exige-series-2-v1.webp?v=1789382486","url":"https:\/\/www.rivalperformance.co.uk\/collections\/lotus-exige-series-2.oembed?page=2","provider":"Rival Performance","version":"1.0","type":"link"}