{"title":"BMW M3 E46 (2000-2006)","description":"\u003cp\u003eThe BMW M3 E46 (2000-2006) is an icon among enthusiasts, celebrated for its naturally aspirated inline-6 engine and balanced handling. Known for delivering an engaging driving experience, the M3 E46 remains a classic. Our performance parts for the M3 include suspension kits, brake upgrades, and tuning options to bring out the best in this legendary model.\u003c\/p\u003e","products":[{"product_id":"ebc-rp-x-racing-brake-pads-rear-bmw-m3-e46","title":"EBC RP-X Racing Brake Pads (REAR) - BMW M3 E46","description":"\u003cp\u003eFollowing the hugely successful launch of RP-1™, EBC Brakes Racing increases its Motorsport brake pad range with the introduction of our latest ultra-high-performance track \u0026amp; race material, RP-X™.\u003cbr\u003e\u003cbr\u003eDesigned for vehicles driven hard on track, RP-X™ possesses a high friction level of 0.55 between 0-750°C (Ambient-1400°F) and achieves a 100% brake effect from cold. This makes RP-X™ an excellent choice for sprint racing or hill climb events, where full brake performance is essential without requiring any ‘warming up’, but also makes RP-X™ well suited to any type of circuit use where a high initial bite and powerful brake response is desirable.\u003cbr\u003e\u003cbr\u003eEBC Racing would like to emphasise that it is not a case of RP-X™ being ‘better’ than RP-1™, rather it is ‘different’ and designed to provide a distinctly different response characteristic (more aggressive bite) which some drivers may prefer.\u003cbr\u003e\u003cbr\u003eRP-X™ also boasts a flat friction response and is capable of operating at temperatures of up to 750°C without brake fade, yet has a slightly higher average friction of 0.55mu. RP-X™’s higher friction level provides a stronger initial bite and more power under braking, all for a reduced pedal effort compared to RP-1™.\u003cbr\u003e\u003cbr\u003eIf you’ve experienced some of the leading track\/race compounds from EBC’s competitors (such as Pagid RS29, Ferodo DS 1.11 or Endless ME20) then RP-X™ will feel very similar in its response characteristic. The higher friction level and higher initial bite mean RP-X™ is well suited to under-servo’d vehicles (for example: Nissan GT-R R35 and Porsche GT models).\u003cbr\u003e\u003cbr\u003eOn these inherently under-servo’d vehicles the brake system is naturally more progressive and feelsome, therefore a more aggressive pad material such as RP-X™ is preferable to keep pedal travel within the optimum displacement range. However, the extra power served up by RP-X™ isn’t at the expense of exceptional feel during the braking phase, with the material still allowing the driver to modulate the brake pedal with ease and explore the limits in each and every braking zone.\u003cbr\u003e\u003cbr\u003eSimilarly, dedicated track\/race cars that employ aftermarket master cylinders, anti-roll bars and bias adjusters would also be well suited to running RP-X™, since these components allow the driver to fine tune the brake bias to permit the use of a naturally more aggressive pad material.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBrake Pad Features:\u003cbr\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eHigh friction level of 0.55 between 0-750°C (0-1400°F)\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eCapable of operating at temperatures of up to 750C without brake fade.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eMade 100% in EBC Brakes’ Bristol, UK pad factory\u003cbr\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eStainless steel backing plates (reduced heat conduction, no paint)\u003cbr\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eBackplates feature Nucap® NRS® hook pad retention system\u003cbr\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eGood pad life with excellent disc life\u003cbr\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eNOT R90 approved for road use in European markets\u003cbr\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eMade with Nucap NRS hooks on backplates to totally eliminate the chance of pad debond\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eHow to Bed-in EBC RP-1\/RP-X Brake Pads\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNo street pre-bed needed. RP brake pads don’t need to “Warm-up” and are as good as or better than most stock pads in lower-speed highway driving. Full potential comes though when you really work these pads though and that is why they are classed as a race pad.\u003cbr\u003e\u003cbr\u003e\u003cstrong data-mce-fragment=\"1\"\u003eTrack\/Race Pre-bed\u003cbr\u003e\u003cbr\u003e\u003c\/strong\u003eFor optimum performance perform a single gentle lap to seat brake pads to rotors, followed by fade 3 as below.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFADE 3 \u003c\/strong\u003e– Perform 6 high-pressure snubs from 90-20mph with a maximum acceleration between consecutive snubs. (approx 0.8g decel, or 80% of an emergency stop). Allow the brakes to fully cool for a minimum of 1 hour before the race session. EBC advise using disc heat paint to ensure green fade is avoided.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003enote: image is for illustration purposes and may differ on delivery.\u003c\/p\u003e","brand":"EBC","offers":[{"title":"Default Title","offer_id":54477305413977,"sku":"DP81118RPX","price":139.64,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0933\/7765\/9225\/files\/RPX_199757da-3da1-4172-8791-d8003e002f20.png?v=1745260521"},{"product_id":"ebc-rp-x-racing-brake-pads-front-bmw-m3-e46","title":"EBC RP-X Racing Brake Pads (FRONT) - BMW M3 E46","description":"\u003cp\u003eFollowing the hugely successful launch of RP-1™, EBC Brakes Racing increases its Motorsport brake pad range with the introduction of our latest ultra-high-performance track \u0026amp; race material, RP-X™.\u003cbr\u003e\u003cbr\u003eDesigned for vehicles driven hard on track, RP-X™ possesses a high friction level of 0.55 between 0-750°C (Ambient-1400°F) and achieves a 100% brake effect from cold. This makes RP-X™ an excellent choice for sprint racing or hill climb events, where full brake performance is essential without requiring any ‘warming up’, but also makes RP-X™ well suited to any type of circuit use where a high initial bite and powerful brake response is desirable.\u003cbr\u003e\u003cbr\u003eEBC Racing would like to emphasise that it is not a case of RP-X™ being ‘better’ than RP-1™, rather it is ‘different’ and designed to provide a distinctly different response characteristic (more aggressive bite) which some drivers may prefer.\u003cbr\u003e\u003cbr\u003eRP-X™ also boasts a flat friction response and is capable of operating at temperatures of up to 750°C without brake fade, yet has a slightly higher average friction of 0.55mu. RP-X™’s higher friction level provides a stronger initial bite and more power under braking, all for a reduced pedal effort compared to RP-1™.\u003cbr\u003e\u003cbr\u003eIf you’ve experienced some of the leading track\/race compounds from EBC’s competitors (such as Pagid RS29, Ferodo DS 1.11 or Endless ME20) then RP-X™ will feel very similar in its response characteristic. The higher friction level and higher initial bite mean RP-X™ is well suited to under-servo’d vehicles (for example: Nissan GT-R R35 and Porsche GT models).\u003cbr\u003e\u003cbr\u003eOn these inherently under-servo’d vehicles the brake system is naturally more progressive and feelsome, therefore a more aggressive pad material such as RP-X™ is preferable to keep pedal travel within the optimum displacement range. However, the extra power served up by RP-X™ isn’t at the expense of exceptional feel during the braking phase, with the material still allowing the driver to modulate the brake pedal with ease and explore the limits in each and every braking zone.\u003cbr\u003e\u003cbr\u003eSimilarly, dedicated track\/race cars that employ aftermarket master cylinders, anti-roll bars and bias adjusters would also be well suited to running RP-X™, since these components allow the driver to fine tune the brake bias to permit the use of a naturally more aggressive pad material.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBrake Pad Features:\u003cbr\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eHigh friction level of 0.55 between 0-750°C (0-1400°F)\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eCapable of operating at temperatures of up to 750C without brake fade.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eMade 100% in EBC Brakes’ Bristol, UK pad factory\u003cbr\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eStainless steel backing plates (reduced heat conduction, no paint)\u003cbr\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eBackplates feature Nucap® NRS® hook pad retention system\u003cbr\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eGood pad life with excellent disc life\u003cbr\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eNOT R90 approved for road use in European markets\u003cbr\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eMade with Nucap NRS hooks on backplates to totally eliminate the chance of pad debond\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eHow to Bed-in EBC RP-1\/RP-X Brake Pads\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNo street pre-bed needed. RP brake pads don’t need to “Warm-up” and are as good as or better than most stock pads in lower-speed highway driving. Full potential comes though when you really work these pads though and that is why they are classed as a race pad.\u003cbr\u003e\u003cbr\u003e\u003cstrong data-mce-fragment=\"1\"\u003eTrack\/Race Pre-bed\u003cbr\u003e\u003cbr\u003e\u003c\/strong\u003eFor optimum performance perform a single gentle lap to seat brake pads to rotors, followed by fade 3 as below.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFADE 3 \u003c\/strong\u003e– Perform 6 high-pressure snubs from 90-20mph with a maximum acceleration between consecutive snubs. (approx 0.8g decel, or 80% of an emergency stop). Allow the brakes to fully cool for a minimum of 1 hour before the race session. EBC advise using disc heat paint to ensure green fade is avoided.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003enote: image is for illustration purposes and may differ on delivery.\u003c\/p\u003e","brand":"EBC","offers":[{"title":"Default Title","offer_id":54477305708889,"sku":"DP8689RPX","price":205.2,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0933\/7765\/9225\/files\/RPX_7d10d849-ff8a-48d8-9c41-ada68f33836c.png?v=1745260533"},{"product_id":"ebc-rp-1-racing-brake-pads-rear-bmw-m3-e46","title":"EBC RP-1 Racing Brake Pads (REAR) - BMW M3 E46","description":"\u003cp\u003eEBC Brakes Racing’s dedicated Motorsport pad RP-1™ pairs high-performance with unprecedented modulation and control, resulting in a track pad that feels uniquely different to the competition and allows drivers to extract every last tenth from each and every braking zone.\u003cbr\u003e\u003cbr\u003eDesigned for vehicles driven hard on track, RP-1™ possesses a moderately high friction level of 0.45 between 100-750°C (200-1400°F). The more progressive response characteristic of RP-1™ makes it well suited for inherently ‘over-servoed’ vehicles where a softer pad material is desirable to allow greater finesse when on the brakes.\u003cbr\u003e\u003cbr\u003eEBC Racing would like to emphasise that it is not a case of RP-1™ being ‘less good’ than RP-X™, rather it is ‘different’ and designed to provide a distinctly different response characteristic (less aggressive bite) which some drivers may prefer.\u003cbr\u003e\u003cbr\u003eRP-1™ boasts a flat friction response averaging 0.45mu and is capable of operating at temperatures of up to 750C without brake fade. However, unlike many other track\/race pad materials on the market, RP-1™ possesses a progressive\/benign response characteristic that provides an exceptional ‘feel’ during each and every braking event.\u003cbr\u003e\u003cbr\u003eThe slightly lower friction level of RP-1™ allows the brake pedal to be worked harder, which is particularly beneficial to cars that are over-servo’d from the factory (for example: Mk7 VW Golf GTI, BMW M cars, Audi RS models, etc). On inherently over-servo’d vehicles, RP-1™ somewhat negates the effect of the over-servo’d brake system setup, resulting in a more progressive and smooth response when driven on track.\u003cbr\u003e\u003cbr\u003eIn some modern vehicles, it can sometimes feel as if all the braking happens in the first inch of pedal travel. Whilst this sharp sensation gives the impression that the car has very ‘good’ brakes to the average driver pootling down to the shops, experienced track\/race drivers know that a hair-trigger brake response is undesirable, verging on totally unacceptable for smooth driving at the limit. A modest amount of brake pedal travel is actually beneficial for performance driving and this is exactly what RP-1™ enables, encouraging the driver to find the limit under braking whilst also enabling trail-braking.\u003cbr\u003e\u003cbr\u003eRP-1™ is particularly suitable for non-ABS assisted vehicles, where a smooth response is essential to avoid locking a wheel under braking. For heavy or inherently under‑servoed vehicles which suit a very aggressive pad, EBC Racing's other track material RP‑X may be preferable.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBrake Pad Features:\u003cbr\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eHigh friction level of 0.45 between 100-750°C (200-1400°F)\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eCapable of operating at temperatures of up to 750C without brake fade.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eMade 100% in EBC Brakes’ Bristol, UK pad factory\u003cbr\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eStainless steel backing plates (reduced heat conduction, no paint)\u003cbr\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eBackplates feature Nucap® NRS® hook pad retention system\u003cbr\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eGood pad life with excellent disc life\u003cbr\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eNOT R90 approved for road use in European markets\u003cbr\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eMade with Nucap NRS hooks on backplates to totally eliminate the chance of pad debond\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eHow to Bed-in EBC RP-1\/RP-X Brake Pads\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNo street pre-bed needed. RP brake pads don’t need to “Warm-up” and are as good as or better than most stock pads in lower-speed highway driving. Full potential comes though when you really work these pads though and that is why they are classed as a race pad.\u003cbr\u003e\u003cbr\u003e\u003cstrong data-mce-fragment=\"1\"\u003eTrack\/Race Pre-bed\u003cbr\u003e\u003cbr\u003e\u003c\/strong\u003eFor optimum performance perform a single gentle lap to seat brake pads to rotors, followed by fade 3 as below.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFADE 3 \u003c\/strong\u003e– Perform 6 high-pressure snubs from 90-20mph with a maximum acceleration between consecutive snubs. (approx 0.8g decel, or 80% of an emergency stop). Allow the brakes to fully cool for a minimum of 1 hour before the race session. EBC advise using disc heat paint to ensure green fade is avoided.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003enote: image is for illustration purposes and may differ on delivery.\u003c\/p\u003e","brand":"EBC","offers":[{"title":"Default Title","offer_id":54477305872729,"sku":"DP81118RP1","price":133.4,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0933\/7765\/9225\/files\/RP1_60e7f09b-c33d-40f3-839b-fd510cc21720.jpg?v=1745260540"},{"product_id":"ebc-rp-1-racing-brake-pads-front-bmw-m3-e46","title":"EBC RP-1 Racing Brake Pads (FRONT) - BMW M3 E46","description":"\u003cp\u003eEBC Brakes Racing’s dedicated Motorsport pad RP-1™ pairs high-performance with unprecedented modulation and control, resulting in a track pad that feels uniquely different to the competition and allows drivers to extract every last tenth from each and every braking zone.\u003cbr\u003e\u003cbr\u003eDesigned for vehicles driven hard on track, RP-1™ possesses a moderately high friction level of 0.45 between 100-750°C (200-1400°F). The more progressive response characteristic of RP-1™ makes it well suited for inherently ‘over-servoed’ vehicles where a softer pad material is desirable to allow greater finesse when on the brakes.\u003cbr\u003e\u003cbr\u003eEBC Racing would like to emphasise that it is not a case of RP-1™ being ‘less good’ than RP-X™, rather it is ‘different’ and designed to provide a distinctly different response characteristic (less aggressive bite) which some drivers may prefer.\u003cbr\u003e\u003cbr\u003eRP-1™ boasts a flat friction response averaging 0.45mu and is capable of operating at temperatures of up to 750C without brake fade. However, unlike many other track\/race pad materials on the market, RP-1™ possesses a progressive\/benign response characteristic that provides an exceptional ‘feel’ during each and every braking event.\u003cbr\u003e\u003cbr\u003eThe slightly lower friction level of RP-1™ allows the brake pedal to be worked harder, which is particularly beneficial to cars that are over-servo’d from the factory (for example: Mk7 VW Golf GTI, BMW M cars, Audi RS models, etc). On inherently over-servo’d vehicles, RP-1™ somewhat negates the effect of the over-servo’d brake system setup, resulting in a more progressive and smooth response when driven on track.\u003cbr\u003e\u003cbr\u003eIn some modern vehicles, it can sometimes feel as if all the braking happens in the first inch of pedal travel. Whilst this sharp sensation gives the impression that the car has very ‘good’ brakes to the average driver pootling down to the shops, experienced track\/race drivers know that a hair-trigger brake response is undesirable, verging on totally unacceptable for smooth driving at the limit. A modest amount of brake pedal travel is actually beneficial for performance driving and this is exactly what RP-1™ enables, encouraging the driver to find the limit under braking whilst also enabling trail-braking.\u003cbr\u003e\u003cbr\u003eRP-1™ is particularly suitable for non-ABS assisted vehicles, where a smooth response is essential to avoid locking a wheel under braking. For heavy or inherently under‑servoed vehicles which suit a very aggressive pad, EBC Racing's other track material RP‑X may be preferable.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBrake Pad Features:\u003cbr\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eHigh friction level of 0.45 between 100-750°C (200-1400°F)\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eCapable of operating at temperatures of up to 750C without brake fade.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eMade 100% in EBC Brakes’ Bristol, UK pad factory\u003cbr\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eStainless steel backing plates (reduced heat conduction, no paint)\u003cbr\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eBackplates feature Nucap® NRS® hook pad retention system\u003cbr\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eGood pad life with excellent disc life\u003cbr\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eNOT R90 approved for road use in European markets\u003cbr\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eMade with Nucap NRS hooks on backplates to totally eliminate the chance of pad debond\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eHow to Bed-in EBC RP-1\/RP-X Brake Pads\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNo street pre-bed needed. RP brake pads don’t need to “Warm-up” and are as good as or better than most stock pads in lower-speed highway driving. Full potential comes though when you really work these pads though and that is why they are classed as a race pad.\u003cbr\u003e\u003cbr\u003e\u003cstrong data-mce-fragment=\"1\"\u003eTrack\/Race Pre-bed\u003cbr\u003e\u003cbr\u003e\u003c\/strong\u003eFor optimum performance perform a single gentle lap to seat brake pads to rotors, followed by fade 3 as below.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFADE 3 \u003c\/strong\u003e– Perform 6 high-pressure snubs from 90-20mph with a maximum acceleration between consecutive snubs. (approx 0.8g decel, or 80% of an emergency stop). Allow the brakes to fully cool for a minimum of 1 hour before the race session. EBC advise using disc heat paint to ensure green fade is avoided.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003enote: image is for illustration purposes and may differ on delivery.\u003c\/p\u003e","brand":"EBC","offers":[{"title":"Default Title","offer_id":54477306298713,"sku":"DP8689RP1","price":163.33,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0933\/7765\/9225\/files\/RP1_cf26a61c-1fca-43a6-8534-3482959bfcee.jpg?v=1745260546"},{"product_id":"ebc-bluestuff-brake-pads-rear-bmw-m3-e46","title":"EBC Bluestuff Brake Pads (REAR) - BMW M3 E46","description":"\u003cp\u003eBluestuff NDX is a high friction sport and race pad that now has R90 approval on almost all fitments for the EU and is therefore totally street legal.\u003cbr\u003e\u003cbr\u003eBluestuff has been used for several seasons in BMW Cup racing with shorter duration and is the EBC Track-day recommended pad. For longer races see the EBC RP or SR ranges. Bluestuff is a popular upgrade brake pad for heavier SUV and 4x4 in street use because of its incredible braking power and high fade resistance and is very popular even on armored street vehicles.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eBluestuff is an entry-level trackday and race pad that has good street manners and is actually R90 approved for street driving. There are two compounds within the Bluestuff range Bluestuff NDX with higher friction of 0.52 Mu and new Bluestuff B with lower friction of 0.42 Mu.\u003c\/p\u003e\n\u003cp\u003eHowever, due to Bluestuff having excellent cold friction and being very controllable, this compound has quickly become the brake pad of choice for performance road car drivers in USA and Asia markets where R90 homologation does not apply. More recently, EBC is pleased to announce that Bluestuff has passed extensive road-focused testing and gained R90 approval on almost all part numbers, making it unique in being the first truly track-focused pad that is also perfectly legal for use on public roads across Europe. There is no requirement for E.U. customers to inform their insurance company following the fitment of R90 approved pads.\u003c\/p\u003e\n\u003cp\u003eFor customers with experience with EBC’s widely acclaimed Yellowstuff material, Bluestuff boasts a similar friction profile but with a usefully higher friction coefficient across the now larger working range, feeling much like you’d imagine Yellowstuff to feel after a double hit of espresso. Bluestuff has the added benefit of much faster bed in time has a high friction coefficient without feeling grabby, taking things up a notch from EBC’s Yellowstuff material by bringing superb pedal modulation to a trackpad with even greater fade resistance.\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThe target use is for all types of fast and heavier cars in performance and race driving with a much enhanced lifetime over EBC's previous Yellowstuff grade pads.\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eR\u0026amp;D Manager Steve Payne checks out the first batch of the Bluestuff NDX material made with a revolutionary process to produce the highly acclaimed EBC Bluestuff NDX Race Pads. The process involves 5 steps never before used in friction materials and sets EBC Brakes firmly in the lead as a provider of brake friction.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eA great choice for turn-up and race track events due to its short bed in time and medium plus lifetime. This compound has been the choice of the BMW cup series for several seasons.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBrake Pad Features:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e0.52μ stable friction once bedded\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eStrong initial bite, work from cold\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eZero rotor damage\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eCopper free for ECO compliance\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eExcellent upgrade pad for SUV and armoured vehicles in street use\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eR90 approved thus legal for public highway use in European markets\u003c\/li\u003e\n\u003cli\u003eMade with Nucap NRS hooks on back plates to totally eliminate the chance of pad debond\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eHow to Bed-in EBC Bluestuff™ Brake Pads\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003ePerform the street pre-bed Fade 1 routine as below (either on the road or at the track if installed there ) followed by Fade 2 at the race track. The latest Bluestuff DM3362 and Low Mu versions should only take Fade 2 and a 15 minute cooling time to be ready to race.\u003cbr\u003e\u003cbr\u003eFade 3 should not be necessary unless poor disc condition has prevented proper seating but if you have time DO perform Fade 3.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFast Street use Pre-bed\u003cbr\u003e\u003cbr\u003eFADE 1\u003c\/strong\u003e – drive 50 to 100 miles on Public road\/highway normal driving to allow the pads to mate up to the disc and establish full contact followed by 8 stops from 80 mph to 30 mph at 300-yard intervals and then coasting allowing the brakes to cool.\u003cbr\u003e\u003cbr\u003e\u003cstrong data-mce-fragment=\"1\"\u003eTrack\/Race Pre-bed\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFADE 2 \u003c\/strong\u003e– After the basic street pre-bed above is performed on the road or at the track if installed there …..Perform 10 medium pressure snubs at the track from 80-20mph leaving 300 meters between each snub (approx 0.4g decel). Allow pads to cool for 15 minutes minimum after coasting to the pits allowing brakes to cool a little.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFADE 3 \u003c\/strong\u003e– Perform 6 high-pressure snubs from 90-20mph with a maximum acceleration between consecutive snubs. (approx 0.8g decel, or 80% of an emergency stop). Allow the brakes to fully cool for a minimum of 1 hour before the race session. EBC advise using disc heat paint to ensure green fade is avoided.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003enote: image is for illustration purposes and may differ on delivery.\u003c\/p\u003e","brand":"EBC","offers":[{"title":"Default Title","offer_id":54477306397017,"sku":"DP51118B","price":125.26,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0933\/7765\/9225\/files\/Bluestuff-pads_3ee3683f-2295-4fa6-9a81-81f6237228d0.jpg?v=1745260553"},{"product_id":"ebc-bluestuff-brake-pads-front-bmw-m3-e46","title":"EBC Bluestuff Brake Pads (FRONT) - BMW M3 E46","description":"\u003cp\u003eBluestuff NDX is a high friction sport and race pad that now has R90 approval on almost all fitments for the EU and is therefore totally street legal.\u003cbr\u003e\u003cbr\u003eBluestuff has been used for several seasons in BMW Cup racing with shorter duration and is the EBC Track-day recommended pad. For longer races see the EBC RP or SR ranges. Bluestuff is a popular upgrade brake pad for heavier SUV and 4x4 in street use because of its incredible braking power and high fade resistance and is very popular even on armored street vehicles.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eBluestuff is an entry-level trackday and race pad that has good street manners and is actually R90 approved for street driving. There are two compounds within the Bluestuff range Bluestuff NDX with higher friction of 0.52 Mu and new Bluestuff B with lower friction of 0.42 Mu.\u003c\/p\u003e\n\u003cp\u003eHowever, due to Bluestuff having excellent cold friction and being very controllable, this compound has quickly become the brake pad of choice for performance road car drivers in USA and Asia markets where R90 homologation does not apply. More recently, EBC is pleased to announce that Bluestuff has passed extensive road-focused testing and gained R90 approval on almost all part numbers, making it unique in being the first truly track-focused pad that is also perfectly legal for use on public roads across Europe. There is no requirement for E.U. customers to inform their insurance company following the fitment of R90 approved pads.\u003c\/p\u003e\n\u003cp\u003eFor customers with experience with EBC’s widely acclaimed Yellowstuff material, Bluestuff boasts a similar friction profile but with a usefully higher friction coefficient across the now larger working range, feeling much like you’d imagine Yellowstuff to feel after a double hit of espresso. Bluestuff has the added benefit of much faster bed in time has a high friction coefficient without feeling grabby, taking things up a notch from EBC’s Yellowstuff material by bringing superb pedal modulation to a trackpad with even greater fade resistance.\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThe target use is for all types of fast and heavier cars in performance and race driving with a much enhanced lifetime over EBC's previous Yellowstuff grade pads.\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eR\u0026amp;D Manager Steve Payne checks out the first batch of the Bluestuff NDX material made with a revolutionary process to produce the highly acclaimed EBC Bluestuff NDX Race Pads. The process involves 5 steps never before used in friction materials and sets EBC Brakes firmly in the lead as a provider of brake friction.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eA great choice for turn-up and race track events due to its short bed in time and medium plus lifetime. This compound has been the choice of the BMW cup series for several seasons.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBrake Pad Features:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e0.52μ stable friction once bedded\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eStrong initial bite, work from cold\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eZero rotor damage\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eCopper free for ECO compliance\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eExcellent upgrade pad for SUV and armoured vehicles in street use\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eR90 approved thus legal for public highway use in European markets\u003c\/li\u003e\n\u003cli\u003eMade with Nucap NRS hooks on back plates to totally eliminate the chance of pad debond\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eHow to Bed-in EBC Bluestuff™ Brake Pads\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003ePerform the street pre-bed Fade 1 routine as below (either on the road or at the track if installed there ) followed by Fade 2 at the race track. The latest Bluestuff DM3362 and Low Mu versions should only take Fade 2 and a 15 minute cooling time to be ready to race.\u003cbr\u003e\u003cbr\u003eFade 3 should not be necessary unless poor disc condition has prevented proper seating but if you have time DO perform Fade 3.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFast Street use Pre-bed\u003cbr\u003e\u003cbr\u003eFADE 1\u003c\/strong\u003e – drive 50 to 100 miles on Public road\/highway normal driving to allow the pads to mate up to the disc and establish full contact followed by 8 stops from 80 mph to 30 mph at 300-yard intervals and then coasting allowing the brakes to cool.\u003cbr\u003e\u003cbr\u003e\u003cstrong data-mce-fragment=\"1\"\u003eTrack\/Race Pre-bed\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFADE 2 \u003c\/strong\u003e– After the basic street pre-bed above is performed on the road or at the track if installed there …..Perform 10 medium pressure snubs at the track from 80-20mph leaving 300 meters between each snub (approx 0.4g decel). Allow pads to cool for 15 minutes minimum after coasting to the pits allowing brakes to cool a little.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFADE 3 \u003c\/strong\u003e– Perform 6 high-pressure snubs from 90-20mph with a maximum acceleration between consecutive snubs. (approx 0.8g decel, or 80% of an emergency stop). Allow the brakes to fully cool for a minimum of 1 hour before the race session. EBC advise using disc heat paint to ensure green fade is avoided.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003enote: image is for illustration purposes and may differ on delivery.\u003c\/p\u003e","brand":"EBC","offers":[{"title":"Default Title","offer_id":54477306528089,"sku":"DP5689NDX","price":157.92,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0933\/7765\/9225\/files\/Bluestuff-pads_10fec94c-443d-4d05-b73d-1b246edc4a58.jpg?v=1745260560"},{"product_id":"ebc-yellowstuff-brake-pads-rear-bmw-m3-e46","title":"EBC Yellowstuff Brake Pads (REAR) - BMW M3 E46","description":"\u003cp\u003eEven as EBC's world number 1 selling pad grade, the EBC Yellowstuff 3068 compound is new for 2021 and is designed where great stopping power is your goal on fast street use on modern sedans and hot hatches. 100% R90 approved.\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eA high friction pad that works from cold and self seats after installation due to its applied brake-in surface coating. Although the new Yellow grade WILL work fine under shorter duration track, trackday (lapping) use on lighter cars or drifting, \u003c\/span\u003eit does take longer to bed in, and if track driving\u003cspan\u003e is your main purpose, choose Bluestuff or the new RP1 and RPX ranges, or allow extra time for bedding your brakes in.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eEBC Yellowstuff are ECE Brake safety tested, which means they must work perfectly from cold at be at least as good or better than stock pads. When Yellowstuff see some heat (which is not tested for in the ECE R90 brake safety regulations) they really show their pedigree. On Japanese cars built with lower friction FF-rated pads these deliver a full grade higher stopping and on German cars built with GG these are about the only aftermarket pads that will match or beat the pretty good German OE spec pads and that takes some doing.\u003c\/p\u003e\n\u003cp\u003eHigh-efficiency performance pad for high friction and improved stopping power. Not only a high friction pad but very resistant to heat and lots of heavy braking means that Yellowstuff has been used with great success in fast street cars and Police vehicle brakes alike.\u003c\/p\u003e\n\u003cp\u003eEBC Yellowstuff was upgraded during 2021 to remove copper from the mix to comply with environmental legislations and as the new mix lasts longer it is not now being suggested as a track material due to the longer bedding in process required. On the street, bedding happens naturally in the first 100-200 miles of urban use but for those drivers wishing to arrive at the track with new pads and enjoy their day, our current suggestion is to use the Bluestuff formulation for track day driving both front and rear.\u003c\/p\u003e\n\u003cp\u003eBecause of its huge heat range, the applications where EBC Yellowstuff will deliver benefits range from fastest street use on higher horsepower cars on most street-based cars and even as a brake upgrade on Trucks and SUV. Yellowstuff is especially appreciated on Trucks for towing and heavy loads and where wheel and tire oversize upgrades have been fitted. In trackday\/drift\/hillclimb races where earlier Yellow blends were suggested, although track capable, is no longer recommended for track use on most cars due to its long bed-in process. BlueStuff is now EBC's recommended entry-level race pad for all cars, which as a track hybrid is still great on the street and even better on track.\u003c\/p\u003e\n\u003cp\u003eWhen considering full-race use on lighter cars, Yellowstuff has been a strong favorite. It is also the choice of 90% of the Mazda MX5 Miata competitors in the UK race series, used  in drifting and on kit cars. EBC Yellowstuff pads are also used on the UK Silverstone Race Track Drivers experience cars because of their high performance and longevity.  Yellowstuff also claimed a win in the Targa rally and for two years running in the Brazil Mitsubishi off Road Team Desert Challenge.\u003c\/p\u003e\n\u003cp\u003eThe majority of UK Police forces use and love EBC Yellowstuff brake pads. EBC has extended fleet miles and reduced their fleet operating costs by allowing Police Chase cars to drive harder and longer in blue light events. These Police forces have been using EBC Yellowstuff for almost three years now and not one force has had an issue that has caused them to stop buying, they just want more of this fantastic brake product!\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBrake Pad Features:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eHigh friction formula improves brake effect by 15%\u003c\/li\u003e\n\u003cli\u003eOur flagship top selling high friction brake pad for improved braking – UK made and a very high-end pad\u003c\/li\u003e\n\u003cli\u003eSuitable for Fast streetcars, trucks and SUVs wherever a decent brake power upgrade is required.\u003c\/li\u003e\n\u003cli\u003eSuper quiet smooth braking under all conditions, fully shimmed slotted and chamfered construction\u003c\/li\u003e\n\u003cli\u003eExcellent cold bite coupled with high-temperature fade resistance\u003c\/li\u003e\n\u003cli\u003eProgressive braking with unparalleled pedal feel\u003c\/li\u003e\n\u003cli\u003eDrastically reduced stopping distances compared to OE\u003c\/li\u003e\n\u003cli\u003eBrake-In™ coating for accelerated pad bed in period\u003c\/li\u003e\n\u003cli\u003eR90 approved thus legal for public highway use in European markets\u003c\/li\u003e\n\u003cli\u003eFor track use Bluestuff may be a better choice due to bedding in speed which is much shorter with Blue\u003c\/li\u003e\n\u003cli\u003eMade with Nucap NRS hooks on back plates to totally eliminate the chance of pad debond\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eHow to Bed-in EBC Yellowstuff™ Brake Pads\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eEBC brake pads are now mostly self bedding, but for extreme street use please read below.\u003c\/p\u003e\n\u003cp\u003eThe Ultimax2, Greenstuff, Redstuff, and \u003cspan data-mce-fragment=\"1\"\u003eYellow\u003c\/span\u003estuff compound grades come with a brake-in coating that scrubs the rotor surface, accelerates pad seating times, and provides a strong brake effect for the first 100 miles of use as the brake pads seat themselves. After the first 100 miles or so, unless you are going to drive aggressively, there is nothing more to do meaning – most drivers happily use and enjoy their brake’s excellent performance for tens of thousands of miles after this point. If that’s your way of driving, nothing more needs to be explained. Just enjoy your brakes.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFast street driving\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eIf you drive aggressively or in a “Spirited” fashion on roads where it is safe to do so, after seating the pads to your rotors and certainly not before 300 miles of use , you should be prepared for the brake pad to emit an odour or even exhibit some smoke as the pads burn off what EBC call “surface volatiles”.\u003c\/p\u003e\n\u003cp\u003eMany faster drivers experience this in harder braking and criticize the brake pad whereas in fact, this is only part of the final high-end bedding-in process as the pads see rotors temps of 400-500C for the first time (not normal in everyday driving).\u003c\/p\u003e\n\u003cp\u003e\u003cspan data-mce-fragment=\"1\"\u003eOnce seated, any organic brake pad made by EBC performs better once the pad goes through heat curing or what EBC call “Green Fade” which happens during its first severe use. The green fade point is 400C\/650F. There are two ways to know if you have passed the green fade point – one is via the use of heat paints, the second way is to guess. So heat paints are the better option.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eYou should drive with caution until bedded flat and you have passed this green fade point at least twice and then allowed the brake pads to cool so the disc is below 100C.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFast Street use Pre-bed\u003cbr\u003e\u003cbr\u003eFADE 1\u003c\/strong\u003e – drive 50 to 100 miles on Public road\/highway normal driving to allow the pads to mate up to the disc and establish full contact followed by 8 stops from 80 mph to 30 mph at 300-yard intervals and then coasting allowing the brakes to cool.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWanting to use Yellowstuff on the track?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003c\/strong\u003eEBC Yellowstuff are no longer optimum for track use. Bed in times are simply too long to be acceptable. Having said that if you LIKE Yellowstuff and want to use them at the track be prepared for the longer bed-in times detailed below.\u003c\/p\u003e\n\u003cp\u003eYellowstuff, although track-capable, is no longer recommended for track use on most cars due to its long bed-in the process. Bluestuff is now EBC's recommended entry-level race pad for all vehicles, which as a track hybrid is still great on the street and even better on track. But if you are to use Yellowstuff on the track, follow the below Fade procedures;\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFADE 2 \u003c\/strong\u003e– After the basic street pre-bed above is performed on the road or at the track if installed there …..Perform 10 medium pressure snubs at the track from 80-20mph leaving 300 meters between each snub (approx 0.4g decel). Allow pads to cool for 15 minutes minimum after coasting to the pits allowing brakes to cool a little.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFADE 3 \u003c\/strong\u003e– Perform 6 high-pressure snubs from 90-20mph with a maximum acceleration between consecutive snubs. (approx 0.8g decel, or 80% of an emergency stop). Allow the brakes to fully cool for a minimum of 1 hour before the race session. EBC advise using disc heat paint to ensure green fade is avoided.\u003c\/p\u003e\n\u003cp\u003enote: image is for illustration purposes and may differ on delivery.\u003c\/p\u003e","brand":"EBC","offers":[{"title":"Default Title","offer_id":54477307314521,"sku":"DP41118R","price":118.8,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0933\/7765\/9225\/files\/Yellowstuff-pads_266d6e95-ed16-4f9f-8c77-c8d8154293a0.jpg?v=1745260568"},{"product_id":"ebc-yellowstuff-brake-pads-front-bmw-m3-e46","title":"EBC Yellowstuff Brake Pads (FRONT) - BMW M3 E46","description":"\u003cp\u003eEven as EBC's world number 1 selling pad grade, the EBC Yellowstuff 3068 compound is new for 2021 and is designed where great stopping power is your goal on fast street use on modern sedans and hot hatches. 100% R90 approved.\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eA high friction pad that works from cold and self seats after installation due to its applied brake-in surface coating. Although the new Yellow grade WILL work fine under shorter duration track, trackday (lapping) use on lighter cars or drifting, \u003c\/span\u003eit does take longer to bed in, and if track driving\u003cspan\u003e is your main purpose, choose Bluestuff or the new RP1 and RPX ranges, or allow extra time for bedding your brakes in.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eEBC Yellowstuff are ECE Brake safety tested, which means they must work perfectly from cold at be at least as good or better than stock pads. When Yellowstuff see some heat (which is not tested for in the ECE R90 brake safety regulations) they really show their pedigree. On Japanese cars built with lower friction FF-rated pads these deliver a full grade higher stopping and on German cars built with GG these are about the only aftermarket pads that will match or beat the pretty good German OE spec pads and that takes some doing.\u003c\/p\u003e\n\u003cp\u003eHigh-efficiency performance pad for high friction and improved stopping power. Not only a high friction pad but very resistant to heat and lots of heavy braking means that Yellowstuff has been used with great success in fast street cars and Police vehicle brakes alike.\u003c\/p\u003e\n\u003cp\u003eEBC Yellowstuff was upgraded during 2021 to remove copper from the mix to comply with environmental legislations and as the new mix lasts longer it is not now being suggested as a track material due to the longer bedding in process required. On the street, bedding happens naturally in the first 100-200 miles of urban use but for those drivers wishing to arrive at the track with new pads and enjoy their day, our current suggestion is to use the Bluestuff formulation for track day driving both front and rear.\u003c\/p\u003e\n\u003cp\u003eBecause of its huge heat range, the applications where EBC Yellowstuff will deliver benefits range from fastest street use on higher horsepower cars on most street-based cars and even as a brake upgrade on Trucks and SUV. Yellowstuff is especially appreciated on Trucks for towing and heavy loads and where wheel and tire oversize upgrades have been fitted. In trackday\/drift\/hillclimb races where earlier Yellow blends were suggested, although track capable, is no longer recommended for track use on most cars due to its long bed-in process. BlueStuff is now EBC's recommended entry-level race pad for all cars, which as a track hybrid is still great on the street and even better on track.\u003c\/p\u003e\n\u003cp\u003eWhen considering full-race use on lighter cars, Yellowstuff has been a strong favorite. It is also the choice of 90% of the Mazda MX5 Miata competitors in the UK race series, used  in drifting and on kit cars. EBC Yellowstuff pads are also used on the UK Silverstone Race Track Drivers experience cars because of their high performance and longevity.  Yellowstuff also claimed a win in the Targa rally and for two years running in the Brazil Mitsubishi off Road Team Desert Challenge.\u003c\/p\u003e\n\u003cp\u003eThe majority of UK Police forces use and love EBC Yellowstuff brake pads. EBC has extended fleet miles and reduced their fleet operating costs by allowing Police Chase cars to drive harder and longer in blue light events. These Police forces have been using EBC Yellowstuff for almost three years now and not one force has had an issue that has caused them to stop buying, they just want more of this fantastic brake product!\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBrake Pad Features:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eHigh friction formula improves brake effect by 15%\u003c\/li\u003e\n\u003cli\u003eOur flagship top selling high friction brake pad for improved braking – UK made and a very high-end pad\u003c\/li\u003e\n\u003cli\u003eSuitable for Fast streetcars, trucks and SUVs wherever a decent brake power upgrade is required.\u003c\/li\u003e\n\u003cli\u003eSuper quiet smooth braking under all conditions, fully shimmed slotted and chamfered construction\u003c\/li\u003e\n\u003cli\u003eExcellent cold bite coupled with high-temperature fade resistance\u003c\/li\u003e\n\u003cli\u003eProgressive braking with unparalleled pedal feel\u003c\/li\u003e\n\u003cli\u003eDrastically reduced stopping distances compared to OE\u003c\/li\u003e\n\u003cli\u003eBrake-In™ coating for accelerated pad bed in period\u003c\/li\u003e\n\u003cli\u003eR90 approved thus legal for public highway use in European markets\u003c\/li\u003e\n\u003cli\u003eFor track use Bluestuff may be a better choice due to bedding in speed which is much shorter with Blue\u003c\/li\u003e\n\u003cli\u003eMade with Nucap NRS hooks on back plates to totally eliminate the chance of pad debond\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eHow to Bed-in EBC Yellowstuff™ Brake Pads\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eEBC brake pads are now mostly self bedding, but for extreme street use please read below.\u003c\/p\u003e\n\u003cp\u003eThe Ultimax2, Greenstuff, Redstuff, and \u003cspan data-mce-fragment=\"1\"\u003eYellow\u003c\/span\u003estuff compound grades come with a brake-in coating that scrubs the rotor surface, accelerates pad seating times, and provides a strong brake effect for the first 100 miles of use as the brake pads seat themselves. After the first 100 miles or so, unless you are going to drive aggressively, there is nothing more to do meaning – most drivers happily use and enjoy their brake’s excellent performance for tens of thousands of miles after this point. If that’s your way of driving, nothing more needs to be explained. Just enjoy your brakes.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFast street driving\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eIf you drive aggressively or in a “Spirited” fashion on roads where it is safe to do so, after seating the pads to your rotors and certainly not before 300 miles of use , you should be prepared for the brake pad to emit an odour or even exhibit some smoke as the pads burn off what EBC call “surface volatiles”.\u003c\/p\u003e\n\u003cp\u003eMany faster drivers experience this in harder braking and criticize the brake pad whereas in fact, this is only part of the final high-end bedding-in process as the pads see rotors temps of 400-500C for the first time (not normal in everyday driving).\u003c\/p\u003e\n\u003cp\u003e\u003cspan data-mce-fragment=\"1\"\u003eOnce seated, any organic brake pad made by EBC performs better once the pad goes through heat curing or what EBC call “Green Fade” which happens during its first severe use. The green fade point is 400C\/650F. There are two ways to know if you have passed the green fade point – one is via the use of heat paints, the second way is to guess. So heat paints are the better option.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eYou should drive with caution until bedded flat and you have passed this green fade point at least twice and then allowed the brake pads to cool so the disc is below 100C.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFast Street use Pre-bed\u003cbr\u003e\u003cbr\u003eFADE 1\u003c\/strong\u003e – drive 50 to 100 miles on Public road\/highway normal driving to allow the pads to mate up to the disc and establish full contact followed by 8 stops from 80 mph to 30 mph at 300-yard intervals and then coasting allowing the brakes to cool.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWanting to use Yellowstuff on the track?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003c\/strong\u003eEBC Yellowstuff are no longer optimum for track use. Bed in times are simply too long to be acceptable. Having said that if you LIKE Yellowstuff and want to use them at the track be prepared for the longer bed-in times detailed below.\u003c\/p\u003e\n\u003cp\u003eYellowstuff, although track-capable, is no longer recommended for track use on most cars due to its long bed-in the process. Bluestuff is now EBC's recommended entry-level race pad for all vehicles, which as a track hybrid is still great on the street and even better on track. But if you are to use Yellowstuff on the track, follow the below Fade procedures;\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFADE 2 \u003c\/strong\u003e– After the basic street pre-bed above is performed on the road or at the track if installed there …..Perform 10 medium pressure snubs at the track from 80-20mph leaving 300 meters between each snub (approx 0.4g decel). Allow pads to cool for 15 minutes minimum after coasting to the pits allowing brakes to cool a little.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFADE 3 \u003c\/strong\u003e– Perform 6 high-pressure snubs from 90-20mph with a maximum acceleration between consecutive snubs. (approx 0.8g decel, or 80% of an emergency stop). Allow the brakes to fully cool for a minimum of 1 hour before the race session. EBC advise using disc heat paint to ensure green fade is avoided.\u003c\/p\u003e\n\u003cp\u003enote: image is for illustration purposes and may differ on delivery.\u003c\/p\u003e","brand":"EBC","offers":[{"title":"Default Title","offer_id":54477307543897,"sku":"DP4689R","price":151.13,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0933\/7765\/9225\/files\/Yellowstuff-pads_191aeb4c-6e8b-499a-a84c-24bd67e31905.jpg?v=1745260575"},{"product_id":"ebc-redstuff-brake-pads-rear-bmw-m3-e46","title":"EBC Redstuff Brake Pads (REAR) - BMW M3 E46","description":"\u003cp\u003eEBC Redstuff brake pads now come in two series. The first is the 3000 series which is EBC’s flagship street brake pad material for prestige and faster cars...setting new standards in braking performance. \u003c\/p\u003e\n\u003cp\u003eThe other is the 9000 series and was once orange in colour. These are also known as the extra duty ED+ brake pads and are the most cost-effective way to boost your truck or SUV Brakes. ED+ is all about… more friction, more heat capability, longer life.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eEBC Redstuff 3000 Series features:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eRedstuff is the EBC premium low dust brake pad for fast street driving on all types of cars. Redstuff brake pads feature an Aramid fiber Ceramic particle enhanced premium brake material. EBC do NOT use Ceramic fibers in any of their pads. Red is copper-free for environmental legislation, also free of sulphides or lead and a low dust material, and fully ECE R90 brake safety tested and approved.\u003c\/p\u003e\n\u003cp\u003eThere is always “Some:” dust from brakes as they wear but the major advantage of the EBC range is that they use zero steel fiber in their pads and instead use less aggressive aramid fibers such as Twaron® and Kevlar® which are easy to wash off wheels and do not etch into wheel lacquers or alloy.\u003c\/p\u003e\n\u003cp\u003eEBC Redstuff is also a long-wearing pad and as such takes approx 500Kms to fully bed down and show its full performance. To assist the bed-in, however, all EBC pads are surface coated with our Brake-in ™ pad brake in accelerator compound.\u003c\/p\u003e\n\u003cp\u003eBeing a hard wearing pad, bed-in times can be as long as 1000 miles and drivers must be patient until the pad takes up the shape of their disc (brake rotor). This is a truly impressive fast road pad for repeated heavy braking.\u003c\/p\u003e\n\u003cp\u003eemits far less dust than semi-metallic pads and has been proven to stop a passenger car\/sedan\/sport compact\/hot hatch 13 metres quicker than OEM pads from 100mph\/160kph. Features EBC Brake-In surface coating which conditions rotor surface and accelerates pad bed-in. Nominal friction coefficient 0.5 with approx. 50% dust reduction. Most EBC Red Ceramic pads are approved to ECE R90 brake safety regulation.\u003c\/p\u003e\n\u003cp\u003eHigh Performance lowest dust rating pads for Prestige imports and faster street driving. There are two reasons our customers love Redstuff, First because they are the lowest dust pad we have encountered by reducing dust by 60-90%. Plus the minimal dust you see is very easily removed with a simple sponge wash as it contains no steel fibre particles as in all other pads. Second they brake like an alligator right from cold (as good as original pads or better) and just get better as they heat up. This material is a aramid fibre based brake compound enhanced with ceramic particles. If you have previously tried EBC Redstuff (pre-ceramic compound) this material is light years ahead. It lasts longer, it brakes better and is quieter.\u003c\/p\u003e\n\u003cp\u003eHigh friction formula improves brake effect 15%.Redstuff ceramic brake pads have always been known for its low dust ability but the latest blend has greatly reduced the phenomenon of pad “Pick up” or disc scoring and reduced dust even further. Tested at the UK Motor Industries Research Association (MIRA) in witnessed tests early Redstuff reduced car stopping distance in tests by almost 50 feet from 100 MPH offering a staggering 30% brake improvement.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBrake Pad Features:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eRedstuff ceramic brake pads, passenger car\/saloon car pad NOT made for Truck or SUV fitments\u003c\/li\u003e\n\u003cli\u003eEBC lowest dust fast street pad with 15% brake improvement\u003c\/li\u003e\n\u003cli\u003eCapable of repeated heavy brake use without brake “Fall-Off”\u003c\/li\u003e\n\u003cli\u003eVery minimal disc\/rotor damage characteristics\u003c\/li\u003e\n\u003cli\u003eSuperb material for Prestige imports\/European and Asian cars\u003c\/li\u003e\n\u003cli\u003eECE R 90 type approved for most cars\u003c\/li\u003e\n\u003cli\u003eFeatures red “brake in’ surface coating for instant safe braking after install\u003c\/li\u003e\n\u003cli\u003eMade with Nucap NRS hooks on backplates to totally eliminate the chance of pad debond\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eEBC Redstuff 9000 Series\/Extra Duty ED+ Features:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eMade 100% in the UK EBC Brakes factory from aramid fibers and a tiny amount of steel fiber the ED+ range is also kinder to rotors and dusting is minimal. EBC are moving their technology forward as new materials come into view, there was and is nothing wrong with the orange previous grade… this one is just a tad better and here's why.\u003c\/p\u003e\n\u003cp\u003eTrucks using large outside diameter tyres pose a problem for brake systems as follows (this is not a criticism of the excellent work that vehicle manufactures do – it’s just an explanation of what happens with larger off-road tyres on a truck)\u003c\/p\u003e\n\u003cp\u003eThe first problem is a thermal or kinetic energy issue on a heavy 2.3T high powered truck with 700BHP+ where the heat of braking needs to be handled, pads get hotter so a high fade resistance – high stability pad needed (that’s why the graph below shows a test at 400C\/750F not lower ) Let’s choose two vehicles, a Gen 6 Mustang and the TRX both with 380mm rotors, or the Raptor with its 350mm rotors. The tyre rolling radius on the Mustang is 13.5” and on the TRX it is 17.3″, that’s a huge 30% increase in rolling radius, and on the Raptor the tyre rolling radius is 16.5” which is a 22% increase over the Mustang. The final issue is a spongy brake pedal that can occur during heavy deceleration as the caliper has to do more work because of the larger tyre diameters. The solution to all is a higher friction pad, reducing the need for higher pedal or caliper pressures.\u003c\/p\u003e\n\u003cp\u003eThe new carbon granule based EXTRA DUTY material is also extremely rotor friendly, minimal in dust and noiseless and each set is supplied with revolutionary NUCAP piston insert shims, another first from EBC.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBrake Pad Features:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eBritish made top quality product - new Red paint finish identifies the new grade AF 903\/09\u003c\/li\u003e\n\u003cli\u003eBacking plate steels feature NUCAP NRS system hook technology for 5 times the bond strength of conventional pads\u003c\/li\u003e\n\u003cli\u003eAfter bedding ( up to 600-800 miles ) pads are silent\u003c\/li\u003e\n\u003cli\u003eNew dual slot and chamfer pattern to reduce noise and improve de-gassing.\u003c\/li\u003e\n\u003cli\u003eFade-free brake material capable of a wide range of operational temperatures\u003c\/li\u003e\n\u003cli\u003ePads should be allowed to seat to your discs\/rotors with normal urban driving and then after 600-800 miles follow this by 15 medium to heavy brake applications to complete the bed-in and surface cure process.\u003c\/li\u003e\n\u003cli\u003eMore brake grip than stock and most low-cost aftermarket pads at less cost than original parts\u003c\/li\u003e\n\u003cli\u003eLonger life than any other pad we have ever made and we think, longer life than anything else out there in the aftermarket, including stock pads\u003c\/li\u003e\n\u003cli\u003eFeatures red brake in surface coating for instant safe braking after install\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow to Bed-in EBC Redstuff™ Brake Pads\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eEBC brake pads are now mostly self bedding. The Ultimax2, Greenstuff, \u003c\/span\u003e\u003cspan\u003eRed\u003c\/span\u003e\u003cspan\u003estuff, and \u003c\/span\u003e\u003cspan\u003eYellowstuff compound grades come with a brake-in coating that scrubs the rotor surface, accelerates pad seating times, and provides a strong brake effect for the first 100 miles of use as the brake pads seat themselves. After the first 100 miles or so, unless you are going to drive aggressively, there is nothing more to do meaning – most drivers happily use and enjoy their brake’s excellent performance for tens of thousands of miles after this point. If that’s your way of driving, nothing more needs to be explained. Just enjoy your brakes.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFast street driving\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eIf you drive aggressively or in a “Spirited” fashion on roads where it is safe to do so, after seating the pads to your rotors and certainly not before 300 miles of use , you should be prepared for the brake pad to emit an odour or even exhibit some smoke as the pads burn off what EBC call “surface volatiles”.\u003c\/p\u003e\n\u003cp\u003eMany faster drivers experience this in harder braking and criticize the brake pad whereas in fact, this is only part of the final high-end bedding-in process as the pads see rotors temps of 400-500C for the first time (not normal in everyday driving).\u003c\/p\u003e\n\u003cp\u003e\u003cspan data-mce-fragment=\"1\"\u003eOnce seated, any organic brake pad made by EBC performs better once the pad goes through heat curing or what EBC call “Green Fade” which happens during its first severe use. The green fade point is 400C\/650F. There are two ways to know if you have passed the green fade point – one is via the use of heat paints, the second way is to guess. So heat paints are the better option.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eYou should drive with caution until bedded flat and you have passed this green fade point at least twice and then allowed the brake pads to cool so the disc is below 100C.\u003c\/p\u003e\n\u003cp\u003eEBC Redstuff is NOT recommended for track use and self seats during the first 100-150 miles of street driving. With new pads and especially when fitted with new rotors, drive cautiously for the first 300-400 miles during which time dust will reduce and the pads will feel better and better.\u003c\/p\u003e\n\u003ch3\u003e\u003c\/h3\u003e\n\u003cp\u003enote: image is for illustration purposes and may differ on delivery.\u003c\/p\u003e","brand":"EBC","offers":[{"title":"Default Title","offer_id":54477307642201,"sku":"DP31118C","price":103.55,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0933\/7765\/9225\/files\/Redstuff-pads_96b1703d-fcb7-48f3-a35b-805b16c276cc.jpg?v=1745260582"},{"product_id":"ebc-redstuff-brake-pads-front-bmw-m3-e46","title":"EBC Redstuff Brake Pads (FRONT) - BMW M3 E46","description":"\u003cp\u003eEBC Redstuff brake pads now come in two series. The first is the 3000 series which is EBC’s flagship street brake pad material for prestige and faster cars...setting new standards in braking performance. \u003c\/p\u003e\n\u003cp\u003eThe other is the 9000 series and was once orange in colour. These are also known as the extra duty ED+ brake pads and are the most cost-effective way to boost your truck or SUV Brakes. ED+ is all about… more friction, more heat capability, longer life.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eEBC Redstuff 3000 Series features:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eRedstuff is the EBC premium low dust brake pad for fast street driving on all types of cars. Redstuff brake pads feature an Aramid fiber Ceramic particle enhanced premium brake material. EBC do NOT use Ceramic fibers in any of their pads. Red is copper-free for environmental legislation, also free of sulphides or lead and a low dust material, and fully ECE R90 brake safety tested and approved.\u003c\/p\u003e\n\u003cp\u003eThere is always “Some:” dust from brakes as they wear but the major advantage of the EBC range is that they use zero steel fiber in their pads and instead use less aggressive aramid fibers such as Twaron® and Kevlar® which are easy to wash off wheels and do not etch into wheel lacquers or alloy.\u003c\/p\u003e\n\u003cp\u003eEBC Redstuff is also a long-wearing pad and as such takes approx 500Kms to fully bed down and show its full performance. To assist the bed-in, however, all EBC pads are surface coated with our Brake-in ™ pad brake in accelerator compound.\u003c\/p\u003e\n\u003cp\u003eBeing a hard wearing pad, bed-in times can be as long as 1000 miles and drivers must be patient until the pad takes up the shape of their disc (brake rotor). This is a truly impressive fast road pad for repeated heavy braking.\u003c\/p\u003e\n\u003cp\u003eemits far less dust than semi-metallic pads and has been proven to stop a passenger car\/sedan\/sport compact\/hot hatch 13 metres quicker than OEM pads from 100mph\/160kph. Features EBC Brake-In surface coating which conditions rotor surface and accelerates pad bed-in. Nominal friction coefficient 0.5 with approx. 50% dust reduction. Most EBC Red Ceramic pads are approved to ECE R90 brake safety regulation.\u003c\/p\u003e\n\u003cp\u003eHigh Performance lowest dust rating pads for Prestige imports and faster street driving. There are two reasons our customers love Redstuff, First because they are the lowest dust pad we have encountered by reducing dust by 60-90%. Plus the minimal dust you see is very easily removed with a simple sponge wash as it contains no steel fibre particles as in all other pads. Second they brake like an alligator right from cold (as good as original pads or better) and just get better as they heat up. This material is a aramid fibre based brake compound enhanced with ceramic particles. If you have previously tried EBC Redstuff (pre-ceramic compound) this material is light years ahead. It lasts longer, it brakes better and is quieter.\u003c\/p\u003e\n\u003cp\u003eHigh friction formula improves brake effect 15%.Redstuff ceramic brake pads have always been known for its low dust ability but the latest blend has greatly reduced the phenomenon of pad “Pick up” or disc scoring and reduced dust even further. Tested at the UK Motor Industries Research Association (MIRA) in witnessed tests early Redstuff reduced car stopping distance in tests by almost 50 feet from 100 MPH offering a staggering 30% brake improvement.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBrake Pad Features:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eRedstuff ceramic brake pads, passenger car\/saloon car pad NOT made for Truck or SUV fitments\u003c\/li\u003e\n\u003cli\u003eEBC lowest dust fast street pad with 15% brake improvement\u003c\/li\u003e\n\u003cli\u003eCapable of repeated heavy brake use without brake “Fall-Off”\u003c\/li\u003e\n\u003cli\u003eVery minimal disc\/rotor damage characteristics\u003c\/li\u003e\n\u003cli\u003eSuperb material for Prestige imports\/European and Asian cars\u003c\/li\u003e\n\u003cli\u003eECE R 90 type approved for most cars\u003c\/li\u003e\n\u003cli\u003eFeatures red “brake in’ surface coating for instant safe braking after install\u003c\/li\u003e\n\u003cli\u003eMade with Nucap NRS hooks on backplates to totally eliminate the chance of pad debond\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eEBC Redstuff 9000 Series\/Extra Duty ED+ Features:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eMade 100% in the UK EBC Brakes factory from aramid fibers and a tiny amount of steel fiber the ED+ range is also kinder to rotors and dusting is minimal. EBC are moving their technology forward as new materials come into view, there was and is nothing wrong with the orange previous grade… this one is just a tad better and here's why.\u003c\/p\u003e\n\u003cp\u003eTrucks using large outside diameter tyres pose a problem for brake systems as follows (this is not a criticism of the excellent work that vehicle manufactures do – it’s just an explanation of what happens with larger off-road tyres on a truck)\u003c\/p\u003e\n\u003cp\u003eThe first problem is a thermal or kinetic energy issue on a heavy 2.3T high powered truck with 700BHP+ where the heat of braking needs to be handled, pads get hotter so a high fade resistance – high stability pad needed (that’s why the graph below shows a test at 400C\/750F not lower ) Let’s choose two vehicles, a Gen 6 Mustang and the TRX both with 380mm rotors, or the Raptor with its 350mm rotors. The tyre rolling radius on the Mustang is 13.5” and on the TRX it is 17.3″, that’s a huge 30% increase in rolling radius, and on the Raptor the tyre rolling radius is 16.5” which is a 22% increase over the Mustang. The final issue is a spongy brake pedal that can occur during heavy deceleration as the caliper has to do more work because of the larger tyre diameters. The solution to all is a higher friction pad, reducing the need for higher pedal or caliper pressures.\u003c\/p\u003e\n\u003cp\u003eThe new carbon granule based EXTRA DUTY material is also extremely rotor friendly, minimal in dust and noiseless and each set is supplied with revolutionary NUCAP piston insert shims, another first from EBC.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBrake Pad Features:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eBritish made top quality product - new Red paint finish identifies the new grade AF 903\/09\u003c\/li\u003e\n\u003cli\u003eBacking plate steels feature NUCAP NRS system hook technology for 5 times the bond strength of conventional pads\u003c\/li\u003e\n\u003cli\u003eAfter bedding ( up to 600-800 miles ) pads are silent\u003c\/li\u003e\n\u003cli\u003eNew dual slot and chamfer pattern to reduce noise and improve de-gassing.\u003c\/li\u003e\n\u003cli\u003eFade-free brake material capable of a wide range of operational temperatures\u003c\/li\u003e\n\u003cli\u003ePads should be allowed to seat to your discs\/rotors with normal urban driving and then after 600-800 miles follow this by 15 medium to heavy brake applications to complete the bed-in and surface cure process.\u003c\/li\u003e\n\u003cli\u003eMore brake grip than stock and most low-cost aftermarket pads at less cost than original parts\u003c\/li\u003e\n\u003cli\u003eLonger life than any other pad we have ever made and we think, longer life than anything else out there in the aftermarket, including stock pads\u003c\/li\u003e\n\u003cli\u003eFeatures red brake in surface coating for instant safe braking after install\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow to Bed-in EBC Redstuff™ Brake Pads\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eEBC brake pads are now mostly self bedding. The Ultimax2, Greenstuff, \u003c\/span\u003e\u003cspan\u003eRed\u003c\/span\u003e\u003cspan\u003estuff, and \u003c\/span\u003e\u003cspan\u003eYellowstuff compound grades come with a brake-in coating that scrubs the rotor surface, accelerates pad seating times, and provides a strong brake effect for the first 100 miles of use as the brake pads seat themselves. After the first 100 miles or so, unless you are going to drive aggressively, there is nothing more to do meaning – most drivers happily use and enjoy their brake’s excellent performance for tens of thousands of miles after this point. If that’s your way of driving, nothing more needs to be explained. Just enjoy your brakes.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFast street driving\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eIf you drive aggressively or in a “Spirited” fashion on roads where it is safe to do so, after seating the pads to your rotors and certainly not before 300 miles of use , you should be prepared for the brake pad to emit an odour or even exhibit some smoke as the pads burn off what EBC call “surface volatiles”.\u003c\/p\u003e\n\u003cp\u003eMany faster drivers experience this in harder braking and criticize the brake pad whereas in fact, this is only part of the final high-end bedding-in process as the pads see rotors temps of 400-500C for the first time (not normal in everyday driving).\u003c\/p\u003e\n\u003cp\u003e\u003cspan data-mce-fragment=\"1\"\u003eOnce seated, any organic brake pad made by EBC performs better once the pad goes through heat curing or what EBC call “Green Fade” which happens during its first severe use. The green fade point is 400C\/650F. There are two ways to know if you have passed the green fade point – one is via the use of heat paints, the second way is to guess. So heat paints are the better option.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eYou should drive with caution until bedded flat and you have passed this green fade point at least twice and then allowed the brake pads to cool so the disc is below 100C.\u003c\/p\u003e\n\u003cp\u003eEBC Redstuff is NOT recommended for track use and self seats during the first 100-150 miles of street driving. With new pads and especially when fitted with new rotors, drive cautiously for the first 300-400 miles during which time dust will reduce and the pads will feel better and better.\u003c\/p\u003e\n\u003ch3\u003e\u003c\/h3\u003e\n\u003cp\u003enote: image is for illustration purposes and may differ on delivery.\u003c\/p\u003e","brand":"EBC","offers":[{"title":"Default Title","offer_id":54477307773273,"sku":"DP3689C","price":124.15,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0933\/7765\/9225\/files\/Redstuff-pads_f466f818-cc53-40e7-acc9-97f487caf05b.jpg?v=1745260589"},{"product_id":"ebc-racing-apollo6-balanced-big-brake-kit-bmw-m3-e46-copy","title":"EBC Racing Apollo6 Balanced Big Brake Kit (355x32mm) - BMW M3 E46","description":"\u003cp\u003eEBC Racing Apollo Balanced Big Brake Kits are one giant leap for performance braking. Each kit designed represents the ultimate upgrade in braking performance, offering significant reductions in stopping distances, whether used on the road or on track!\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003eEvery individual component found in a EBC Racing Balanced Big Brake Kit has been designed from the ground up to perform, right down to the very last bleed nipple. Every single brake caliper metal fitting and brake disc drive bobbin is manufactured from stainless steel to ensure parts are long lasting and do not corrode. The brake disc bell and caliper brackets are machined from aerospace grade billet aluminium for high strength and durability. To finish off, every kit is supplied with EBC brake pads, braided brake lines \u0026amp; brake fluid.\u003cbr\u003e\u003cbr\u003eEBC's Apollo brake calipers utilise a 2-piece bolted design, incorporating high tensile 12.9 grade steel bolts for reinforcement of the caliper bridge section. Computer FEA analysis shows that the utilisation of high-tensile steel bolts to reinforce the bridge brings significant improvements in caliper stiffness compared to a mono-block design. A stiffer bridge section means less elongation during brake apply, giving a firmer and more responsive pedal feel, especially after a period of harder braking where the aluminium bridge of a mono-block design caliper softens appreciably with increasing temperature. Unlike the vast majority of cast calipers, which are typically gravity cast, Apollo Series caliper bodies are machined from heat treated low pressure castings. Low pressure casting is a vastly more expensive production method than conventional gravity casting, but by forcing the aluminium alloy into the mould under pressure the consistency of the finished part is greatly improved. This gives EBC’s Apollo Series brake calipers a noticeable performance advantage over conventional gravity cast calipers, exhibiting higher overall strength and a comparable caliper body stiffness to forging. \u003cbr\u003e\u003cbr\u003eEBC don’t just want Apollo calipers to look good in the box, they want them to look great for years to come, that’s why EBC finish every caliper using their advanced high-temperature Teflon™ polyester coating process. This top-coat paint system is similar to what’s used in the cookware market on the underside of pans and it gives a durable, fade resistant coating that’s easy to wipe clean and ensures that Apollo calipers will look great for years to come.\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003eEBC’s 2-piece brake rotors have been quality tested in accordance to the recently introduced R90 brake rotor test routine. This test is the harshest and most rigorous test for brake rotors in the world and is purposely designed to attempt to cause brake rotors to fail. The EBC disc passed the test with ease, completing the full 150 test cycles without so much as exhibiting minor surface crazing, a true testament to the exception quality of EBC’s UK made 2-piece rotors.\u003cbr\u003e\u003cbr\u003eEvery kit is supplied with all the hardware needed to completely replace all equivalent components of the vehicles stock braking system, giving a firmer and more responsive brake pedal and allowing to drive harder for longer without the onset of brake fade. Yet unlike all other front ‘big brake kits’ on the market – which solely supply the parts for one axle – every EBC Balanced Big Brake Kit is a full vehicle upgrade and is supplied complete with matching friction rear pads to fit the original caliper and braided brake lines for the front and rear, ensuring a totally balanced brake upgrade that delivers maximum braking performance.\u003cbr\u003e\u003cbr\u003eEBC recommends the fitment of aftermarket wheels, and that you check for any clearance issues. Sometimes wheel spacers are needed, or the use of larger diameter wheels. If unsure, please contact us.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eKit contents:\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eEBC Racing BBK Brake Calipers\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eEBC Racing BBK Brake Caliper Mounting Brackets\u003c\/li\u003e\n\u003cli\u003eEBC Racing 2-Piece Brake Disc Rotors\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eEBC Racing Brake Pads (front \u0026amp; rear)\u003c\/li\u003e\n\u003cli\u003eEBC Racing Braided Brake Lines (front \u0026amp; rear)\u003c\/li\u003e\n\u003cli\u003eEBC Racing Brake Fluid\u003c\/li\u003e\n\u003cli\u003eEBC Racing BBK Hardware (everything needed for direct installation)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eEBC Racing BBK benefits:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eLighter weight than OE brake discs\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eEvery EBC Balanced Big Brake Kit is a full vehicle upgrade and is supplied complete with matching friction rear pads to fit the original caliper and braided brake lines for the front and rear, ensuring a totally balanced brake upgrade that delivers maximum braking performance.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003eSold either as a direct replacement for performance vehicles where 2-piece brake discs are fitted as standard, or as a simple bolt-on 2-piece floating upgrade for vehicles with 1-piece cast iron discs fitted as standard. Where the vehicle has a 2-piece pin-drive brake disc as original equipment, EBC's SG2F 2-piece disc upgrade seamlessly replaces the pin-drive disc with a true fully-floating 2-piece disc, whilst requiring no vehicle modifications\u003c\/li\u003e\n\u003cli\u003eNo vehicle modifications are required for 2-piece disc conversions\u003c\/li\u003e\n\u003cli\u003e48 directionally handed curved vanes for effective heat dissipation\u003c\/li\u003e\n\u003cli\u003eLower operating temperatures help delay the onset of brake fade\u003c\/li\u003e\n\u003cli\u003eDesigned, manufactured and run-out tested in the UK\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eHow to Bed-in EBC Brake Discs\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThe best way to bed in new brake discs is to use them gently over the first few hundred miles, not getting them too hot and letting them cool gently. Try to avoid hard braking during this time (safety considered).\u003cbr\u003e\u003cbr\u003eBecause new brake pads will be paired with the new brake discs, follow the bed-in procedure for the brake pads being installed.\u003cbr\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003enote: image is for illustration purposes and may differ on delivery.\u003c\/p\u003e","brand":"EBC","offers":[{"title":"Black","offer_id":54477308002649,"sku":"BBK045BLK-1","price":2715.04,"currency_code":"GBP","in_stock":true},{"title":"Blue","offer_id":54477308035417,"sku":"BBK045BLU-1","price":2715.04,"currency_code":"GBP","in_stock":true},{"title":"Red","offer_id":54477308068185,"sku":"BBK045RED-1","price":2715.04,"currency_code":"GBP","in_stock":true},{"title":"Yellow","offer_id":54477308100953,"sku":"BBK045YEL-1","price":2715.04,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0933\/7765\/9225\/files\/ebc-6pot-bbk.jpg?v=1745260601"},{"product_id":"ebc-racing-4pot-balanced-big-brake-kit-front-bmw-m3-e46","title":"EBC Racing Apollo4 Balanced Big Brake Kit (355x32mm) - BMW M3 E46","description":"\u003cp\u003eEBC Racing Apollo Balanced Big Brake Kits are one giant leap for performance braking. Each kit designed represents the ultimate upgrade in braking performance, offering significant reductions in stopping distances, whether used on the road or on track!\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003eEvery individual component found in a EBC Racing Balanced Big Brake Kit has been designed from the ground up to perform, right down to the very last bleed nipple. Every single brake caliper metal fitting and brake disc drive bobbin is manufactured from stainless steel to ensure parts are long lasting and do not corrode. The brake disc bell and caliper brackets are machined from aerospace grade billet aluminium for high strength and durability. To finish off, every kit is supplied with EBC brake pads, braided brake lines \u0026amp; brake fluid.\u003cbr\u003e\u003cbr\u003eEBC's Apollo brake calipers utilise a 2-piece bolted design, incorporating high tensile 12.9 grade steel bolts for reinforcement of the caliper bridge section. Computer FEA analysis shows that the utilisation of high-tensile steel bolts to reinforce the bridge brings significant improvements in caliper stiffness compared to a mono-block design. A stiffer bridge section means less elongation during brake apply, giving a firmer and more responsive pedal feel, especially after a period of harder braking where the aluminium bridge of a mono-block design caliper softens appreciably with increasing temperature. Unlike the vast majority of cast calipers, which are typically gravity cast, Apollo Series caliper bodies are machined from heat treated low pressure castings. Low pressure casting is a vastly more expensive production method than conventional gravity casting, but by forcing the aluminium alloy into the mould under pressure the consistency of the finished part is greatly improved. This gives EBC’s Apollo Series brake calipers a noticeable performance advantage over conventional gravity cast calipers, exhibiting higher overall strength and a comparable caliper body stiffness to forging. \u003cbr\u003e\u003cbr\u003eEBC don’t just want Apollo calipers to look good in the box, they want them to look great for years to come, that’s why EBC finish every caliper using their advanced high-temperature Teflon™ polyester coating process. This top-coat paint system is similar to what’s used in the cookware market on the underside of pans and it gives a durable, fade resistant coating that’s easy to wipe clean and ensures that Apollo calipers will look great for years to come.\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003eEBC’s 2-piece brake rotors have been quality tested in accordance to the recently introduced R90 brake rotor test routine. This test is the harshest and most rigorous test for brake rotors in the world and is purposely designed to attempt to cause brake rotors to fail. The EBC disc passed the test with ease, completing the full 150 test cycles without so much as exhibiting minor surface crazing, a true testament to the exception quality of EBC’s UK made 2-piece rotors.\u003cbr\u003e\u003cbr\u003eEvery kit is supplied with all the hardware needed to completely replace all equivalent components of the vehicles stock braking system, giving a firmer and more responsive brake pedal and allowing to drive harder for longer without the onset of brake fade. Yet unlike all other front ‘big brake kits’ on the market – which solely supply the parts for one axle – every EBC Balanced Big Brake Kit is a full vehicle upgrade and is supplied complete with matching friction rear pads to fit the original caliper and braided brake lines for the front and rear, ensuring a totally balanced brake upgrade that delivers maximum braking performance.\u003cbr\u003e\u003cbr\u003eEBC recommends the fitment of aftermarket wheels, and that you check for any clearance issues. Sometimes wheel spacers are needed, or the use of larger diameter wheels. If unsure, please contact us.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eKit contents:\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eEBC Racing BBK Brake Calipers\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eEBC Racing BBK Brake Caliper Mounting Brackets\u003c\/li\u003e\n\u003cli\u003eEBC Racing 2-Piece Brake Disc Rotors\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eEBC Racing Brake Pads (front \u0026amp; rear)\u003c\/li\u003e\n\u003cli\u003eEBC Racing Braided Brake Lines (front \u0026amp; rear)\u003c\/li\u003e\n\u003cli\u003eEBC Racing Brake Fluid\u003c\/li\u003e\n\u003cli\u003eEBC Racing BBK Hardware (everything needed for direct installation)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eEBC Racing BBK benefits:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eLighter weight than OE brake discs\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eEvery EBC Balanced Big Brake Kit is a full vehicle upgrade and is supplied complete with matching friction rear pads to fit the original caliper and braided brake lines for the front and rear, ensuring a totally balanced brake upgrade that delivers maximum braking performance.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003eSold either as a direct replacement for performance vehicles where 2-piece brake discs are fitted as standard, or as a simple bolt-on 2-piece floating upgrade for vehicles with 1-piece cast iron discs fitted as standard. Where the vehicle has a 2-piece pin-drive brake disc as original equipment, EBC's SG2F 2-piece disc upgrade seamlessly replaces the pin-drive disc with a true fully-floating 2-piece disc, whilst requiring no vehicle modifications\u003c\/li\u003e\n\u003cli\u003eNo vehicle modifications are required for 2-piece disc conversions\u003c\/li\u003e\n\u003cli\u003e48 directionally handed curved vanes for effective heat dissipation\u003c\/li\u003e\n\u003cli\u003eLower operating temperatures help delay the onset of brake fade\u003c\/li\u003e\n\u003cli\u003eDesigned, manufactured and run-out tested in the UK\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eHow to Bed-in EBC Brake Discs\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThe best way to bed in new brake discs is to use them gently over the first few hundred miles, not getting them too hot and letting them cool gently. Try to avoid hard braking during this time (safety considered).\u003cbr\u003e\u003cbr\u003eBecause new brake pads will be paired with the new brake discs, follow the bed-in procedure for the brake pads being installed.\u003cbr\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003enote: image is for illustration purposes and may differ on delivery.\u003c\/p\u003e","brand":"EBC","offers":[{"title":"Black","offer_id":54477308854617,"sku":"BBK013BLK-1","price":2332.15,"currency_code":"GBP","in_stock":true},{"title":"Blue","offer_id":54477308887385,"sku":"BBK013BLU-1","price":2332.15,"currency_code":"GBP","in_stock":true},{"title":"Red","offer_id":54477308920153,"sku":"BBK013RED-1","price":2332.15,"currency_code":"GBP","in_stock":true},{"title":"Yellow","offer_id":54477308952921,"sku":"BBK013YEL-1","price":2332.15,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0933\/7765\/9225\/files\/ebc-4pot-bbk_a6869807-f8b7-450e-bcba-438f6cefbf8c.jpg?v=1745260611"},{"product_id":"tpi-tuner-steel-wheel-bolts-bmw-m3-e46","title":"TPI Tuner Steel Wheel Bolts - BMW M3 E46","description":"\u003cp\u003e\u003cstrong data-mce-fragment=\"1\"\u003eTUNER KEY NOTICE - \u003c\/strong\u003eTPI Tuner Steel Wheel Bolts feature a unique 6 spline head. \u003cspan style=\"font-size: 0.875rem;\" data-mce-style=\"font-size: 0.875rem;\" data-mce-fragment=\"1\"\u003eand require the TPI tuner wheel bolt key for installation \u0026amp; removal. The TPI tuner wheel bolt key is sold separately.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003ePerfect for alloy wheels with small pocket holes. Both solid and durable with a race appearance. High Torque tested to 270ft\/lbs and are T6 Heat-treated.\u003cspan style=\"font-size: 0.875rem;\"\u003e\u003cbr\u003e\u003cbr\u003e\u003c\/span\u003e\u003cspan data-mce-fragment=\"1\"\u003eTapered fitment\u003c\/span\u003e\u003cspan data-mce-fragment=\"1\"\u003e, and a\u003c\/span\u003e\u003cspan data-mce-fragment=\"1\"\u003evailable in 28mm or 50mm length only.\u003cbr\u003e\u003cbr\u003eSold individually.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBolt Length Sizes:\u003c\/strong\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e28mm - Approx Factory length\u003c\/li\u003e\n\u003cli\u003e50mm - For use with 10, 12, 15, 20 or 25mm wheel spacers\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eNote: These wheel bolt heads are smaller than factory wheel bolt heads and have a tapered seated fitment.\u003c\/p\u003e\n\u003cp\u003enote: image is for illustration purposes and may differ on delivery\u003c\/p\u003e","brand":"TPi","offers":[{"title":"28mm","offer_id":54477672218969,"sku":"TB175110SD","price":1.65,"currency_code":"GBP","in_stock":true},{"title":"50mm","offer_id":54477672251737,"sku":"TB175195SD","price":2.46,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0933\/7765\/9225\/files\/tpi_tuner_wheel_bolts_2_3_85f148ac-a271-4a94-ab90-4f297cdb0ddc.jpg?v=1745265380"},{"product_id":"bimecc-steel-wheel-bolts-black-tapered-bmw-m3-e46","title":"Bimecc Steel Wheel Bolts (Black) Tapered - BMW M3 E46","description":"\u003cp\u003eBimecc Wheel bolts are both solid and durable.\u003c\/p\u003e\n\u003cp\u003eHigh Torque tested to 270 ft\/lbs. T6 Heat-treated.\u003c\/p\u003e\n\u003cp\u003eTapered fitment.\u003c\/p\u003e\n\u003cp\u003eAvailable in various lengths.\u003c\/p\u003e\n\u003cp\u003eSold individually.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBolt Length Sizes:\u003c\/strong\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e28mm - Approx Factory length\u003c\/li\u003e\n\u003cli\u003e35mm - For use with wheel spacers up to 7mm\u003c\/li\u003e\n\u003cli\u003e40mm - For use with 10, 12 or 15mm wheel spacers\u003c\/li\u003e\n\u003cli\u003e45mm - For use with 20mm wheel spacers\u003c\/li\u003e\n\u003cli\u003e50mm - For use with 20 or 25mm wheel spacers\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eNote: These wheel bolt heads are the same size as factory wheel bolts.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e","brand":"Bimecc","offers":[{"title":"28mm","offer_id":54477672317273,"sku":"C17A28-ZINNI","price":1.84,"currency_code":"GBP","in_stock":true},{"title":"35mm","offer_id":54477672350041,"sku":"C17A35-ZINNI","price":2.1,"currency_code":"GBP","in_stock":true},{"title":"40mm","offer_id":54477672382809,"sku":"B34-ZNNI","price":2.2,"currency_code":"GBP","in_stock":true},{"title":"45mm","offer_id":54477672415577,"sku":"C17A45-ZINNI","price":2.2,"currency_code":"GBP","in_stock":true},{"title":"50mm","offer_id":54477672448345,"sku":"C17A50-ZINNI","price":2.45,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0933\/7765\/9225\/files\/BimeccTaperedWheelBolt_black.jpg?v=1773164491"},{"product_id":"bimecc-steel-wheel-bolts-chrome-tapered-bmw-m3-e46","title":"Bimecc Steel Wheel Bolts (Chrome) Tapered - BMW M3 E46","description":"\u003cp\u003eBimecc Wheel bolts are both solid and durable.\u003c\/p\u003e\n\u003cp\u003eHigh Torque tested to 270 ft\/lbs. T6 Heat-treated.\u003c\/p\u003e\n\u003cp\u003eTapered fitment.\u003c\/p\u003e\n\u003cp\u003eAvailable in various lengths.\u003c\/p\u003e\n\u003cp\u003eSold individually.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBolt Length Sizes:\u003c\/strong\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e28mm - Approx Factory length\u003c\/li\u003e\n\u003cli\u003e35mm - For use with wheel spacers up to 7mm\u003c\/li\u003e\n\u003cli\u003e40mm - For use with 10, 12 or 15mm wheel spacers\u003c\/li\u003e\n\u003cli\u003e45mm - For use with 20mm wheel spacers\u003c\/li\u003e\n\u003cli\u003e50mm - For use with 20 or 25mm wheel spacers\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eNote: These wheel bolt heads are the same size as factory wheel bolts.\u003c\/p\u003e\n\u003cp\u003e \u003cbr\u003e\u003c\/p\u003e","brand":"Bimecc","offers":[{"title":"28mm","offer_id":54477672546649,"sku":"C17A28","price":1.64,"currency_code":"GBP","in_stock":true},{"title":"35mm","offer_id":54477672579417,"sku":"C17A35","price":1.64,"currency_code":"GBP","in_stock":true},{"title":"40mm","offer_id":54477672612185,"sku":"B34","price":1.84,"currency_code":"GBP","in_stock":true},{"title":"45mm","offer_id":54477672644953,"sku":"C17A45","price":1.84,"currency_code":"GBP","in_stock":true},{"title":"50mm","offer_id":54477672677721,"sku":"C17A50","price":1.94,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0933\/7765\/9225\/files\/BimeccTaperedWheelBolt_2e9bb1d2-24e8-41a8-9ba5-2dee3dd899a7.jpg?v=1773164479"},{"product_id":"pbs-procomp-performance-brake-pads-rear-bmw-3-series-m3-coupe-e46-z4-e85-e86","title":"PBS ProComp Performance Brake Pads (REAR) - BMW 3 Series M3 Coupe E46 \u0026 Z4 E85\/E86","description":"\u003cp\u003ePBS Procomp Brake Pads are semi-metallic competition brake pads that work consistently, even under the harshest endurance braking conditions.\u003c\/p\u003e\n\u003cp\u003eWith excellent brake fade resistance and an operating temperature of 200 to 800°C, this pad compound posses a high initial bite with excellent pedal feel that will benefit both heavy and endurance cars.\u003c\/p\u003e\n\u003cp\u003eFeatures NUCAP permanent bond NRS, which are hundreds of steel hooks that hold the pad compound onto the backing plate, and massively reduces the risk of pad compound coming apart from the backing plate under heavy track use.\u003c\/p\u003e\n\u003cp\u003ePerfect for sprints, time attack and circuit racing.\u003c\/p\u003e\n\u003cp\u003eWhen on track, brake pads are subjected to pressure from caliper pistons as well as high friction heat. Performance Brake Solutions have undergone extensive brake pad testing in order to keep the brake pad remaining flat throughout the race in order to offer optimal performance. The technology used on the high quality steel backing plates ensure that the brake pad compound has the best holding capabilities under extreme driving conditions.\u003c\/p\u003e\n\u003cp\u003eThe Procomp brake pad material is 0.55 to 0.65mu, which provides incredible stopping power.\u003c\/p\u003e\n\u003cp\u003eMade by racing drivers for racing drivers.\u003c\/p\u003e\n\u003cp\u003eSupplied as a set.\u003c\/p\u003e\n\u003cp\u003eA direct fit for:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eBMW 3 Series 330i Coupe E46\u003c\/li\u003e\n\u003cli\u003eBMW 3 Series M3 Coupe E46\u003c\/li\u003e\n\u003cli\u003eBMW Z4 M Roadster E85\u003c\/li\u003e\n\u003cli\u003eBMW Z4 M Coupe E86\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003cp\u003ePBS Brake Pad Bedding-in Process:\u003c\/p\u003e\n\u003cp\u003ePBS brake pads are put through a heat curing treatment during the manufacturing process and 'burns out' unwanted materials in advance, reducing the gases that can cause brake fade. Because of this treatment, PBS brake pads only require light 'bedding in'.\u003c\/p\u003e\n\u003cp\u003eIt is recommend to perform 10 stops at low pressure and low temperature from 90MPH to approximately 50MPH, and the distance between each brake stop is to be approximately 600 to 800 meters.\u003c\/p\u003e\n\u003cp\u003ePBS brake pads should be bedded in until they are up to mid range working temperature and then allowed to cool properly. Doing this process will help to remove any gases that were in the brake pad compound and will create a perfect contact pattern between the brake disc and the brake pads.\u003c\/p\u003e\n\u003cp\u003enote: image is for illustration purposes and may differ on delivery\u003c\/p\u003e","brand":"PBS","offers":[{"title":"Default Title","offer_id":54477754925401,"sku":"8422PC","price":234.7,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0933\/7765\/9225\/files\/procomp_pbs_0473a05f-8e53-4cd2-8991-cfe07f9a9d5b.jpg?v=1745267653"},{"product_id":"pbs-prorace-performance-brake-pads-rear-bmw-3-series-m3-coupe-e46-z4-e85-e86","title":"PBS ProRace Performance Brake Pads (REAR) - BMW 3 Series M3 Coupe E46 \u0026 Z4 E85\/E86","description":"\u003cp\u003ePBS Prorace Brake Pads are high performance track\/race brake pads that provide a excellent bite with pedal feel from cold.\u003c\/p\u003e\n\u003cp\u003eWith excellent brake fade resistance and an operating temperature of 0 to 800°C, this pad posses a high initial bite with excellent pedal feel that will handle most serious braking conditions.\u003c\/p\u003e\n\u003cp\u003eFeatures NUCAP permanent bond NRS, which are hundreds of steel hooks that hold the pad compound onto the backing plate, and massively reduces the risk of pad compound coming apart from the backing plate under heavy track use.\u003c\/p\u003e\n\u003cp\u003ePerfect for sprints, time attack and circuit racing.\u003c\/p\u003e\n\u003cp\u003eWhen on track, brake pads are subjected to pressure from caliper pistons as well as high friction heat. Performance Brake Solutions have undergone extensive brake pad testing in order to keep the brake pad remaining flat throughout the race in order to offer optimal performance. The technology used on the high quality steel backing plates ensure that the brake pad compound has the best holding capabilities under extreme driving conditions.\u003c\/p\u003e\n\u003cp\u003eThe Prorace brake pad material is 0.36 to 0.58mu, which provides incredible stopping power.\u003c\/p\u003e\n\u003cp\u003eMade by racing drivers for racing drivers.\u003c\/p\u003e\n\u003cp\u003eSupplied as a set.\u003c\/p\u003e\n\u003cp\u003eA direct fit for:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eBMW 3 Series 330i Coupe E46\u003c\/li\u003e\n\u003cli\u003eBMW 3 Series M3 Coupe E46\u003c\/li\u003e\n\u003cli\u003eBMW Z4 M Roadster E85\u003c\/li\u003e\n\u003cli\u003eBMW Z4 M Coupe E86\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003cp\u003ePBS Brake Pad Bedding-in Process:\u003c\/p\u003e\n\u003cp\u003ePBS brake pads are put through a heat curing treatment during the manufacturing process and 'burns out' unwanted materials in advance, reducing the gases that can cause brake fade. Because of this treatment, PBS brake pads only require light 'bedding in'.\u003c\/p\u003e\n\u003cp\u003eIt is recommend to perform 10 stops at low pressure and low temperature from 90MPH to approximately 50MPH, and the distance between each brake stop is to be approximately 600 to 800 meters.\u003c\/p\u003e\n\u003cp\u003ePBS brake pads should be bedded in until they are up to mid range working temperature and then allowed to cool properly. Doing this process will help to remove any gases that were in the brake pad compound and will create a perfect contact pattern between the brake disc and the brake pads.\u003c\/p\u003e\n\u003cp\u003enote: image is for illustration purposes and may differ on delivery\u003c\/p\u003e","brand":"PBS","offers":[{"title":"Default Title","offer_id":54477755089241,"sku":"8422PR","price":159.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0933\/7765\/9225\/files\/pbs_prorace_1_3_1_1_1_716e19ca-d863-4eff-8ab3-5d6941fc6694.jpg?v=1745267661"},{"product_id":"pbs-procomp-performance-brake-pads-front-bmw-3-series-m3-coupe-e46-z4-m-e85-e86","title":"PBS ProComp Performance Brake Pads (FRONT) - BMW 3 Series M3 Coupe E46 \u0026 Z4 M E85\/E86","description":"\u003cp\u003ePBS Procomp Brake Pads are semi-metallic competition brake pads that work consistently, even under the harshest endurance braking conditions.\u003c\/p\u003e\n\u003cp\u003eWith excellent brake fade resistance and an operating temperature of 200 to 800°C, this pad compound posses a high initial bite with excellent pedal feel that will benefit both heavy and endurance cars.\u003c\/p\u003e\n\u003cp\u003eFeatures NUCAP permanent bond NRS, which are hundreds of steel hooks that hold the pad compound onto the backing plate, and massively reduces the risk of pad compound coming apart from the backing plate under heavy track use.\u003c\/p\u003e\n\u003cp\u003ePerfect for sprints, time attack and circuit racing.\u003c\/p\u003e\n\u003cp\u003eWhen on track, brake pads are subjected to pressure from caliper pistons as well as high friction heat. Performance Brake Solutions have undergone extensive brake pad testing in order to keep the brake pad remaining flat throughout the race in order to offer optimal performance. The technology used on the high quality steel backing plates ensure that the brake pad compound has the best holding capabilities under extreme driving conditions.\u003c\/p\u003e\n\u003cp\u003eThe Procomp brake pad material is 0.55 to 0.65mu, which provides incredible stopping power.\u003c\/p\u003e\n\u003cp\u003eMade by racing drivers for racing drivers.\u003c\/p\u003e\n\u003cp\u003eSupplied as a set.\u003c\/p\u003e\n\u003cp\u003eA direct fit for:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eBMW 3 Series 330i Coupe E46\u003c\/li\u003e\n\u003cli\u003eBMW 3 Series M3 Coupe E46\u003c\/li\u003e\n\u003cli\u003eBMW Z4 M Roadster E85\u003c\/li\u003e\n\u003cli\u003eBMW Z4 M Coupe E86\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003cp\u003ePBS Brake Pad Bedding-in Process:\u003c\/p\u003e\n\u003cp\u003ePBS brake pads are put through a heat curing treatment during the manufacturing process and 'burns out' unwanted materials in advance, reducing the gases that can cause brake fade. Because of this treatment, PBS brake pads only require light 'bedding in'.\u003c\/p\u003e\n\u003cp\u003eIt is recommend to perform 10 stops at low pressure and low temperature from 90MPH to approximately 50MPH, and the distance between each brake stop is to be approximately 600 to 800 meters.\u003c\/p\u003e\n\u003cp\u003ePBS brake pads should be bedded in until they are up to mid range working temperature and then allowed to cool properly. Doing this process will help to remove any gases that were in the brake pad compound and will create a perfect contact pattern between the brake disc and the brake pads.\u003c\/p\u003e\n\u003cp\u003enote: image is for illustration purposes and may differ on delivery\u003c\/p\u003e","brand":"PBS","offers":[{"title":"Yes these are correct for my application","offer_id":54477756334425,"sku":"1364PC","price":244.57,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0933\/7765\/9225\/files\/procomp_pbs_3d4b20d6-dc65-44b4-8614-d5dc537c57ac.jpg?v=1745267728"},{"product_id":"pbs-protrack-performance-brake-pads-front-bmw-3-series-m3-coupe-e46-z4-m-e85-e86","title":"PBS ProTrack Performance Brake Pads (FRONT) - BMW 3 Series M3 Coupe E46 \u0026 Z4 M E85\/E86","description":"\u003cp\u003ePBS Protrack Brake Pads are high performance track brake pads that provide a great bite with pedal feel from cold.\u003c\/p\u003e\n\u003cp\u003eWith excellent brake fade resistance and an operating temperature of 0 to 700°C, this pad posses a lower initial bite with a great pedal feel and stopping power, making them a perfect for light track use, wet conditions or for those with low grip control tyres.\u003c\/p\u003e\n\u003cp\u003ePerfect for sprints, time attack and circuit racing.\u003c\/p\u003e\n\u003cp\u003eWhen on track, brake pads are subjected to pressure from caliper pistons as well as high friction heat. Performance Brake Solutions have undergone extensive brake pad testing in order to keep the brake pad remaining flat throughout the race in order to offer optimal performance. The technology used on the high quality steel backing plates ensure that the brake pad compound has the best holding capabilities under extreme driving conditions.\u003c\/p\u003e\n\u003cp\u003eThe Protrack brake pad material is 0.40 to 0.48mu, which provides progressive and predictable braking power.\u003c\/p\u003e\n\u003cp\u003eMade by racing drivers for racing drivers.\u003c\/p\u003e\n\u003cp\u003eSupplied as a set.\u003c\/p\u003e\n\u003cp\u003eA direct fit for:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eBMW 3 Series 330i Coupe E46\u003c\/li\u003e\n\u003cli\u003eBMW 3 Series M3 Coupe E46\u003c\/li\u003e\n\u003cli\u003eBMW Z4 M Roadster E85\u003c\/li\u003e\n\u003cli\u003eBMW Z4 M Coupe E86\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003cp\u003ePBS Brake Pad Bedding-in Process:\u003c\/p\u003e\n\u003cp\u003ePBS brake pads are put through a heat curing treatment during the manufacturing process and 'burns out' unwanted materials in advance, reducing the gases that can cause brake fade. Because of this treatment, PBS brake pads only require light 'bedding in'.\u003c\/p\u003e\n\u003cp\u003eIt is recommend to perform 10 stops at low pressure and low temperature from 90MPH to approximately 50MPH, and the distance between each brake stop is to be approximately 600 to 800 meters.\u003c\/p\u003e\n\u003cp\u003ePBS brake pads should be bedded in until they are up to mid range working temperature and then allowed to cool properly. Doing this process will help to remove any gases that were in the brake pad compound and will create a perfect contact pattern between the brake disc and the brake pads.\u003c\/p\u003e\n\u003cp\u003enote: image is for illustration purposes and may differ on delivery\u003c\/p\u003e","brand":"PBS","offers":[{"title":"Yes, these are correct for my application.","offer_id":54477756432729,"sku":"1364PT","price":176.3,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0933\/7765\/9225\/files\/pbs_protrack_2_1_1_1_1_2_ddbc5dc1-8f27-4288-bf2b-30a752930141.jpg?v=1745267744"},{"product_id":"bimecc-hubcentric-wheel-spacer-kit-5x120-bmw-m3-e46","title":"Bimecc Slip-on Hubcentric Wheel Spacers (5x120) - BMW M3 E46","description":"\u003cp\u003eBimecc Hubcentric Wheel Spacers are made from high quality aluminium, and are CNC lathed \u0026amp; milled to ensure precision fitment.\u003c\/p\u003e\n\u003cp\u003eIdeal for extending the axle\/track width, fill the arches or improve the overall look of the car.\u003c\/p\u003e\n\u003cp\u003eBlack coated for added durability.\u003c\/p\u003e\n\u003cp\u003eSuitable for road \u0026amp; track use.\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eSold as a 2 piece set, ready to put onto either the front or rear hubs.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePCD: 5x120\u003c\/li\u003e\n\u003cli\u003eCentre Bore: 72.6\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003enote: image is for illustration purposes and may differ on delivery\u003c\/p\u003e","brand":"Bimecc","offers":[{"title":"12mm","offer_id":54477833863513,"sku":"SPK80C","price":69.99,"currency_code":"GBP","in_stock":true},{"title":"15mm","offer_id":54477833896281,"sku":"SPK80D","price":69.99,"currency_code":"GBP","in_stock":true},{"title":"20mm","offer_id":54477833929049,"sku":"SPK80","price":69.99,"currency_code":"GBP","in_stock":true},{"title":"25mm","offer_id":54477833961817,"sku":"SPK80E","price":69.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0933\/7765\/9225\/files\/BIMECCSPACERs_bb726e39-4b80-4b95-8510-89dfc7997f38.jpg?v=1745269899"},{"product_id":"bimecc-wheel-stud-nut-conversion-kit-bmw-m3-e46","title":"Bimecc Wheel Stud \u0026 Nut Conversion Kit - BMW M3 E46","description":"\u003cp\u003eBimecc Wheel Stud \u0026amp; Nut Conversion Kits, made in Italy, are crafted from 10.9 strength rating cold forged steel. Renowned for their quality, they are used in racing and motorsport events worldwide, making them ideal for those wanting to eliminate wheel bolts.\u003c\/p\u003e\n\u003cp\u003ePaired with open ended wheel nuts of the same thread pitch.\u003c\/p\u003e\n\u003cp\u003eSold as a set of 20.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eManufactured From Cold Forged Steel (10.9 Strength Rating)\u003c\/li\u003e\n\u003cli\u003eAvailable in 75mm, 82mm or 90mm Stud Length\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eSize Specifications:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e75mm - For use with or without 10mm spacers (15mm threaded hub length | 55mm threaded nut length)\u003c\/li\u003e\n\u003cli\u003e82mm - For use with 15mm spacers (15mm threaded hub length | 62mm threaded nut length)\u003c\/li\u003e\n\u003cli\u003e90mm - For use with 20mm spacers (15mm threaded hub length | 70mm threaded nut length)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eInstallation Process:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eWhen installing each wheel stud into the wheel hub, the use of thread lock such as Loctite 242 Blue must be used in order to ensure the wheel stud stays secured to the hub. Loctite 242 Blue is vibration resistant \u0026amp; good for up to 149degrees Celsius.\u003c\/li\u003e\n\u003cli\u003eEach wheel stud is to be torqued to 14NM, and each wheel nut is to be torqued to the same rating as the original car manufactures factory wheel bolt torque rate\u003c\/li\u003e\n\u003cli\u003eAfter approximately 50-60miles worth of use, check that the wheel nut torque rating has remained the same and re-torque if needed.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003enote: image is for illustration purposes and may differ on delivery.\u003c\/p\u003e","brand":"Bimecc","offers":[{"title":"75mm","offer_id":54477852148057,"sku":"RM-WSNCK-M1250-75","price":89.99,"currency_code":"GBP","in_stock":true},{"title":"82mm","offer_id":54477852180825,"sku":"RM-WSNCK-M1250-82","price":89.99,"currency_code":"GBP","in_stock":true},{"title":"90mm","offer_id":54477852213593,"sku":"RM-WSNCK-M1250-90","price":89.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0933\/7765\/9225\/files\/wheel-studs_c44a58f3-609b-4a17-ab40-a28fd300e060.jpg?v=1745270555"},{"product_id":"k-n-oe-replacement-performance-panel-air-filter-bmw-m3-e46","title":"K\u0026N OE Replacement Performance Panel Air Filter - BMW M3 E46","description":"\u003cp\u003eThe K\u0026amp;N OE Replacement Cotton Gauze Performance Air Filter designed to increase horsepower and acceleration while providing excellent filtration.\u003c\/p\u003e\n\u003cp\u003eK\u0026amp;N air filters are covered by the famous K\u0026amp;N Million-Mile Limited Warranty™ and will be the last air filter your car will ever need.\u003c\/p\u003e\n\u003cp\u003eBoth washable \u0026amp; reusable, and is designed to directly fit into the OE factory air box.\u003c\/p\u003e\n\u003cp\u003enote: image is for illustration purposes and may differ on delivery\u003c\/p\u003e","brand":"K\u0026N","offers":[{"title":"Default Title","offer_id":54488902533465,"sku":"33-2231","price":64.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0933\/7765\/9225\/files\/k_n_performance_panel_filter_3_2_1_1_1_1_1_1_1_1_1_1_1_1_1_1.jpg?v=1745448884"},{"product_id":"vibra-technics-competition-front-engine-mount-petrol-engines-only-bmw-m3-e46","title":"Vibra Technics Competition Front Engine Mount (Petrol engines only) - BMW M3 E46","description":"\u003cp\u003e\u003cstrong\u003eBMW E46 (inc. Compact) excludes xi\u003c\/strong\u003e\u003c\/p\u003e\n\t\t\u003cp\u003e\u003cstrong\u003eBMW362MX - Front Engine Mount  (Petrol engines only)\u003c\/strong\u003e\u003c\/p\u003e\n\t\t\u003cp\u003eThe original equipment engine mounts are designed to give a soft, comfortable ride in road car applications. This results in excessive engine movement which affects gear selection, cornering and braking when the car is driven on the track. In racing applications the OEM mounts are prone to premature failure of the rubber section and fracturing of the base of the pressed steel housing. \n\u003c\/p\u003e\n\u003cp\u003e\n\u003c\/p\u003e\n\u003cp\u003eVibra-Technics have listened to BMW racing teams and have created this ultimate engine mount for motorsport applications.\n\u003c\/p\u003e\n\u003cp\u003e\n\u003c\/p\u003e\n\u003cp\u003eUnlike the expensive BMW Group N parts which are just standard mounts in a harder rubber compound this engine mount is purpose designed for racing applications. Our mount is designed without compromise and combines a 6082 billet aluminium housing with a high shear modulus rubber insulator at its core. It is completely fail safe making it ideal for competition car applications and overcomes all the weaknesses of the OEM design.\n\u003c\/p\u003e\n\u003cp\u003e\n\u003c\/p\u003e\n\u003cp\u003e\n\u003c\/p\u003e\n\u003cp\u003e \n\u003c\/p\u003e\n\u003cp\u003ePrice is for a single mount.\n\u003c\/p\u003e\n\u003cp\u003e\n\u003c\/p\u003e\n\u003cp\u003eReplaces OEM part:-\n\u003c\/p\u003e\n\u003cp\u003e11812283798\n\u003c\/p\u003e\n\u003cp\u003e11811140985\n\u003c\/p\u003e\n\u003cp\u003e11811141377\n\u003c\/p\u003e\n\u003cp\u003e11817837985\n\u003c\/p\u003e\n\u003cp\u003e22002224413 (Motorsport)\n\u003c\/p\u003e\n\u003cp\u003e11812224413N (Motorsport)\n\u003c\/p\u003e\n\u003cp\u003e22111095444\u003c\/p\u003e","brand":"Vibra-Technics","offers":[{"title":"Default Title","offer_id":54488920686937,"sku":"BMW362MX","price":146.92,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0933\/7765\/9225\/files\/bmw360m_859.jpg?v=1745449388"},{"product_id":"vibra-technics-fast-road-amp-competition-transmission-mount-6-speed-s54-bmw-m3-e46","title":"Vibra Technics Fast Road \u0026 Competition Transmission Mount (6 speed S54) - BMW M3 E46","description":"\u003cp\u003e\u003cstrong\u003eBMW E46 (inc. Compact) excludes xi\u003c\/strong\u003e\u003c\/p\u003e\n\t\t\u003cp\u003e\u003cstrong\u003eBMW468M - Transmission Mount (6 speed M3 S54 only)\u003c\/strong\u003e\u003c\/p\u003e\n\t\t\u003cp\u003eThe original BMW gearbox mounts allow significant movement and are not suitable for motorsport applications. Aftermarket mounts do not address the fundamental flaws in the design and can still fail leaving the gearbox to move unrestrained. This unique design is a complete crossmember that has high shear modulus insulator elements built in. It is completely failsafe and is a significant upgrade to the OEM design. It virtually eliminates unwanted movement that can affect gear selection and alignment of the driveshaft without compromising NVH performance.\n\u003c\/p\u003e\n\u003cp\u003e\n\u003c\/p\u003e\n\u003cp\u003eReplaces gearbox support, BMW part number 22312229198 and its mountings.\n\u003c\/p\u003e\n\u003cp\u003e\n\u003c\/p\u003e\n\u003cp\u003eIMPORTANT NOTE:-\n\u003c\/p\u003e\n\u003cp\u003eThis mount and cross member is designed to fit the M3 with the OEM exhaust and headers. Aftermarket systems with larger diameter pipes may give clearance issues.\u003c\/p\u003e","brand":"Vibra-Technics","offers":[{"title":"Default Title","offer_id":54488920818009,"sku":"BMW468M","price":218.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0933\/7765\/9225\/files\/e46_crossmember_1196.jpg?v=1745449393"},{"product_id":"csf-race-radiator-for-bmw-e46-m3-triple-pass-radiator","title":"CSF Race Radiator for BMW E46 M3 Triple Pass Radiator","description":"\u003cp style=\"font-weight: 400;\" data-mce-fragment=\"1\" data-mce-style=\"font-weight: 400;\"\u003eCSF Race Radiator for BMW E46 M3 Triple Pass Radiator\u003c\/p\u003e\n\u003cp style=\"font-weight: 400;\" data-mce-fragment=\"1\" data-mce-style=\"font-weight: 400;\"\u003eWith CSF’s exclusive B-Tube technology and 6.5mm multi-louvered fin height, 1 hour hand polished mirror-finish, CNC machined mounting brackets\u003cbr data-mce-fragment=\"1\"\u003e\u003c\/p\u003e\n\u003cp style=\"font-weight: 400;\" data-mce-fragment=\"1\" data-mce-style=\"font-weight: 400;\"\u003eTrue “drop-in-fit” with no modifications necessary\u003c\/p\u003e\n\u003cp style=\"font-weight: 400;\" data-mce-fragment=\"1\" data-mce-style=\"font-weight: 400;\"\u003e\u003cb data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003ePART NUMBER: \u003c\/strong\u003e\u003c\/b\u003eCSF-7058\u003c\/p\u003e\n\u003cp style=\"font-weight: 400;\" data-mce-fragment=\"1\" data-mce-style=\"font-weight: 400;\"\u003e\u003cb data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eFits: \u003c\/strong\u003e\u003c\/b\u003eBMW E46 M3\u003c\/p\u003e\n\u003cp style=\"font-weight: 400;\" data-mce-fragment=\"1\" data-mce-style=\"font-weight: 400;\"\u003eCSF manufactures the most advanced and efficient radiator cores in the industry by using innovative tube and fin technologies with industry leading testing methods to maximize airflow and heat dissipation. These techniques allow CSF to stay ahead of the pack when it comes to radiator technology!\u003c\/p\u003e\n\u003cul style=\"font-weight: 400;\" data-mce-fragment=\"1\" data-mce-style=\"font-weight: 400;\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003e\n\u003cem data-mce-fragment=\"1\"\u003e“B-Tube” technology\u003c\/em\u003e – Unlike a regular oval shape “O” type radiator tube, CSF uses a specially engineered tube in a shape of a “B”. These “B-tubes” are carefully formed and then brazed over the seam to seal. CSF is able to use thinner and lighter aluminium material (better cooling efficiency) because this design is actually stronger than normal “O” shape tubes that are welded.\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eThe design (inlet in the middle of tube that is seam brazed) \u003cem data-mce-fragment=\"1\"\u003eincreases the heat transfer surface area of the tubes\u003c\/em\u003e by approximately 15% over regular tubes. You get the efficiency of 2 smaller tubes vs. 1 large tube within the same space criteria. With “B-tubes” you are able to get “dual liquid laminar flow.”\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e\n\u003cem data-mce-fragment=\"1\"\u003eHigh Efficiency Multi Louvered Fin\u003c\/em\u003e – CSF uses ultra efficient multi louvered fins that are carefully and precisely aligned to maximize airflow through each radiator core. Fin specifications are carefully measured and calculated for each application, and tested for maximum heat rejection efficiency in our wind-tunnel lab.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"CSF","offers":[{"title":"Default Title","offer_id":54489744671065,"sku":"CSF-7058","price":792.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0933\/7765\/9225\/files\/7058DSC06871_5000x_0e7da493-a699-4507-9fa8-d0b218e00edf.jpg?v=1745478912"},{"product_id":"csf-race-bmw-e46-m3-race-spec-dual-pass-oil-cooler","title":"CSF Race BMW E46 M3 race-spec Dual-pass oil cooler","description":"\u003cp style=\"font-weight: 400;\" data-mce-fragment=\"1\" data-mce-style=\"font-weight: 400;\"\u003eCSF Race BMW E46 M3 race-spec Dual-pass oil cooler\u003c\/p\u003e\n\u003cp style=\"font-weight: 400;\" data-mce-fragment=\"1\" data-mce-style=\"font-weight: 400;\"\u003eDesigned, developed, and track proven in collaboration with BMW M3 tuning specialist and parts manufacturer, Rogue Engineering\u003c\/p\u003e\n\u003cp style=\"font-weight: 400;\" data-mce-fragment=\"1\" data-mce-style=\"font-weight: 400;\"\u003eReplaces OEM unit single-pass design and plastic shroud with a unique top\/bottom dual-pass design for maximum surface area and flow.\u003c\/p\u003e\n\u003cp style=\"font-weight: 400;\" data-mce-fragment=\"1\" data-mce-style=\"font-weight: 400;\"\u003e“Drop-in fit” requiring no modifications to install. Accepts factory oil-line connections\u003c\/p\u003e\n\u003cp style=\"font-weight: 400;\" data-mce-fragment=\"1\" data-mce-style=\"font-weight: 400;\"\u003eFully TIG-welded extruded-end tank design vs. OEM mechanically jointed and tack-welded design for superior reliability \u0026amp; durability\u003c\/p\u003e\n\u003cp style=\"font-weight: 400;\" data-mce-fragment=\"1\" data-mce-style=\"font-weight: 400;\"\u003eFits precisely with the contour of the OEM bumper. No issues with aftermarket splitter attachement either\u003c\/p\u003e\n\u003cp style=\"font-weight: 400;\" data-mce-fragment=\"1\" data-mce-style=\"font-weight: 400;\"\u003eTurbulated heavy\/duty bar\/plate design for the most reliable \u0026amp; durable oil cooler available for the platform\u003c\/p\u003e\n\u003cp style=\"font-weight: 400;\" data-mce-fragment=\"1\" data-mce-style=\"font-weight: 400;\"\u003e8 rows of maximum cooling with a high density multi-louvered fin pitch design\u003c\/p\u003e\n\u003cp style=\"font-weight: 400;\" data-mce-fragment=\"1\" data-mce-style=\"font-weight: 400;\"\u003eDesigned to work with OEM radiator brackets or CSF’s all-aluminium triple-pass radiator (CSF #7058)\u003c\/p\u003e","brand":"CSF","offers":[{"title":"Default Title","offer_id":54489755025753,"sku":"CSF-8032","price":768.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0933\/7765\/9225\/files\/8032DSC06701_5000x_8926ef83-98a9-48b2-a807-4639cdf89187.jpg?v=1745479087"},{"product_id":"wavetrac-atb-helical-limited-slip-differential-bmw-m3-e46-e90-e92-output-flanges-required-not-included","title":"Wavetrac ATB Helical Limited Slip Differential - BMW M3 E46-E90-E92 (output flanges required, not included)","description":"\u003cp style=\"font-weight: 400;\" data-mce-fragment=\"1\" data-mce-style=\"font-weight: 400;\"\u003e\u003cspan\u003eSimply put - \u003c\/span\u003e\u003cb data-mce-fragment=\"1\"\u003eWavetrac is the only gear diff on the market that does not lose all drive when one axle is unloaded.\u003c\/b\u003e\u003cspan\u003e Axles become unloaded in aggressive driving, track cornering, extremely slick surfaces, etc. It happens more than most people realise.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp style=\"font-weight: 400;\" data-mce-fragment=\"1\" data-mce-style=\"font-weight: 400;\"\u003e\u003cspan\u003e\u003cdiv class=\"lazyframe lazyframe--loaded\" data-ratio=\"16:9\" data-src=\"https:\/\/www.youtube.com\/embed\/beqoMN-0hNM\"\u003e\u003ciframe src=\"https:\/\/www.youtube.com\/embed\/beqoMN-0hNM\" height=\"315\" width=\"560\" allowfullscreen=\"\" allow=\"accelerometer; autoplay; clipboard-write; encrypted-media; gyroscope; picture-in-picture\" frameborder=\"0\"\u003e\u003c\/iframe\u003e\u003c\/div\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp style=\"font-weight: 400;\" data-mce-fragment=\"1\" data-mce-style=\"font-weight: 400;\" p=\"\"\u003eWe won’t go into torque bias ratios or the concept of how torque biasing diffs work at this point. Let’s get to how the Wavetrac affects performance:\u003c\/p\u003e\n\u003cp style=\"font-weight: 400;\" data-mce-fragment=\"1\" data-mce-style=\"font-weight: 400;\"\u003eFor example, you have a conventional gear diff (OEM, Quaife, MF, OBX, Truetrac, Torsen, etc.), you're on a race track for a track day and during cornering your inside wheel bumps over the curbing. This is normal for track driving. The issue is that for the brief moments your inside tire becomes unloaded when bouncing over curbs, your other wheel is not getting drive - is not putting power down. Gear diffs need load on both axles in order to function. The result on a track (or during aggressive driving) is that there are many times when a normal gear diff supplies only intermittent power to the gripping wheel.\u003c\/p\u003e\n\u003cp style=\"font-weight: 400;\" data-mce-fragment=\"1\" data-mce-style=\"font-weight: 400;\"\u003eNow, same track with Wavetrac: the patented cam device in the Wavetrac prevents loss of drive when that inside wheel is unloaded. The device is able to generate a load inside the diff (to replace the lost load as it happens) that can then be biased to the gripping wheel - in the end making more consistent power delivery through a corner. That makes the car more predictable, and faster overall.\u003c\/p\u003e\n\u003cp style=\"font-weight: 400;\" data-mce-fragment=\"1\" data-mce-style=\"font-weight: 400;\"\u003e\u003cb data-mce-fragment=\"1\"\u003eOther benefits:\u003c\/b\u003e\u003c\/p\u003e\n\u003cul style=\"font-weight: 400;\" data-mce-fragment=\"1\" data-mce-style=\"font-weight: 400;\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003ePatented Carbon Fibre Bias Plate for the pinions. All other gear type LSDs run the pinions on the housing, meaning the friction from 0 miles is different to 100 miles, thus effectiveness is reduced over the life of the diff. With the Wavetrac performance is consistent with the Carbon Fibre bias plates!\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003ePatented Wave Profile eliminates the effect of a near to and zero load condition drive ability issues found in all other gear type ATB LSDs.\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eARP Bolts used throughout for superior faster reliability. \u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e9310 steel gears run in billet or forged steel bodies. \u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eManufactured \u0026amp; Designed in the USA\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp style=\"font-weight: 400;\" data-mce-fragment=\"1\" data-mce-style=\"font-weight: 400;\"\u003e\u003cb data-mce-fragment=\"1\"\u003eWAVETRAC: Smooth is Fast\u003c\/b\u003e\u003c\/p\u003e\n\u003cp style=\"font-weight: 400;\" data-mce-fragment=\"1\" data-mce-style=\"font-weight: 400;\"\u003eThe beauty of the Wavetrac is that it is ideally suited to high performance road cars that see track use. It is very strong, yet transparent to both driver and traction control electronics during regular driving. On the track or in spirited road use, it provides drive to both wheels without the handling issues that traditional clutch type diffs create (there is no tendency to push\/understeer with a Wavetrac). \u003c\/p\u003e\n\u003cp style=\"font-weight: 400;\" data-mce-fragment=\"1\" data-mce-style=\"font-weight: 400;\"\u003eThe Wavetrac outperforms other gear type differentials because unlike them, it won't lose drive when one axle is unloaded (which happens more often than you'd think).\u003c\/p\u003e\n\u003cp style=\"font-weight: 400;\" data-mce-fragment=\"1\" data-mce-style=\"font-weight: 400;\"\u003eLastly, one of the most underrated benefits of the Wavetrac is its smooth delivery of power near the limit. Its patented design makes for a very predictable, smooth addition of power when you need it most - when things are at their limits: on the edge of traction mid-corner and using throttle to keep it there; or coming into a corner a little hot, but quickly back on it to maintain exit speed...\u003c\/p\u003e\n\u003cp style=\"font-weight: 400;\" data-mce-fragment=\"1\" data-mce-style=\"font-weight: 400;\"\u003eThese situations are often subjective to the driver, but the benefit can be felt. The Wavetrac makes you faster because it lets you drive with confidence. \u003cb data-mce-fragment=\"1\"\u003eSmooth is fast.\u003c\/b\u003e\u003c\/p\u003e","brand":"Wavetrac","offers":[{"title":"Default Title","offer_id":54489867452761,"sku":"30.309.165WK","price":1740.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0933\/7765\/9225\/files\/30.309.165WK30.309.165WK-2_2_5000x_e9d55196-dcb2-4398-80b0-e1f31b0dacc7.jpg?v=1745481019"},{"product_id":"momo-steering-wheel-hub-boss-kit-bmw-3-series-m3-coupe-e46","title":"MOMO Steering Wheel Hub Boss Kit - BMW 3 Series M3 Coupe E46","description":"\u003cp\u003eMOMO Steering Wheel Hub Boss Kits enable the installation of aftermarket steering wheels directly onto the steering hub.\u003c\/p\u003e\n\u003cp\u003eSuitable for MOMO and non MOMO branded steering wheels that feature 6x70mm hole PCD, such as OMP and Sparco.\u003c\/p\u003e\n\u003cp\u003eDesigned to position the steering wheel in the same place as the original steering wheel fitted by the manufacturer.\u003c\/p\u003e\n\u003cp\u003eMost MOMO wheel hub kits are the collapsible type which makes them SVA compliant.\u003c\/p\u003e\n\u003cp\u003eEasy to install and includes required mounting hardware.\u003c\/p\u003e\n\u003cp\u003enote: image is for illustration purposes and may differ on delivery\u003c\/p\u003e","brand":"MOMO","offers":[{"title":"Default Title","offer_id":54491464368473,"sku":"MA2012R","price":124.79,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0933\/7765\/9225\/files\/momo_steering_wheel_boss_kit_-_honda_civic_type_r_ep3_2001_2006_1_4_1_1_1_1.jpg?v=1745502823"},{"product_id":"bilstein-b16-pss10-coilovers-bmw-e46-m3","title":"Bilstein B16 PSS10 Coilovers - BMW E46 M3","description":"\u003cp\u003eBILSTEIN B16 Coilovers features full rebound and compression adjustability by a simple twist of the dial located on the coilover unit.\u003c\/p\u003e\n\u003cp\u003eDeveloped on the Nurburgring, ensuring high speed cornering and handling are optimised.\u003c\/p\u003e\n\u003cp\u003eThe quality of the BILSTEIN coilover is second to none and performance is exceptional!\u003c\/p\u003e\n\u003cp\u003eWith control on both compression and rebound, these are perfect for both road and track use.\u003c\/p\u003e\n\u003cp\u003eStainless steel coilover bodies and each unit can be lowered between 30-50mm.\u003c\/p\u003e\n\u003cp\u003eSupplied as complete kit.\u003c\/p\u003e\n\u003cp\u003eBILSTEIN B16 Adjustable Coilover features:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eTriple-C-Technology® Surface Coating For Long-lasting Corrosion Resistance\u003c\/li\u003e\n\u003cli\u003eRoad-tested \u0026amp; Fine-tuned By BILSTEIN Under Motorsport Conditions\u003c\/li\u003e\n\u003cli\u003eSpring seats \u0026amp; Lock plates Made From A Special Aluminium Alloy\u003c\/li\u003e\n\u003cli\u003eProvides Lowering Between 30-50mm\u003c\/li\u003e\n\u003cli\u003eMono-tube\/Upside-down Technology\u003c\/li\u003e\n\u003cli\u003eCompression \u0026amp; Rebound Adjustable\u003c\/li\u003e\n\u003cli\u003eHigh Quality Durable Sport Springs\u003c\/li\u003e\n\u003cli\u003eGas Pressure Technology\u003c\/li\u003e\n\u003cli\u003eGerman TÜV Certificate\u003c\/li\u003e\n\u003cli\u003eMade In Germany\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eBILSTEIN B16 PSS differences:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePSS9: Provides 9 stage compression \u0026amp; rebound adjustability\u003c\/li\u003e\n\u003cli\u003ePSS10: Provides 10 stage compression \u0026amp; rebound adjustability\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003enote: image is for illustration purposes and may differ on delivery\u003c\/p\u003e","brand":"Bilstein","offers":[{"title":"Default Title","offer_id":54491501855065,"sku":"48-126687","price":1914.24,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0933\/7765\/9225\/files\/bilstein_b16_adjustable_coilover_kit_rival_motorsport_38.jpg?v=1745503069"},{"product_id":"walbro-400lph-in-tank-fuel-pump-kit-bmw-e46-m3-in-tank-upgrade","title":"Walbro 400LPH In-Tank  Fuel Pump Kit - BMW E46 M3 In Tank Upgrade","description":"\u003cp\u003eWalbro In-Tank Fuel Pump Kits contain one of the most popular aftermarket fuel pumps on the market today.\u003c\/p\u003e\u003cp\u003eKit contains everything needed to allow a simply plug and play installation.\u003c\/p\u003e\u003cp\u003enote: image is for illustration purposes and may differ on delivery\u003c\/p\u003e","brand":"Walbro","offers":[{"title":"Default Title","offer_id":54491564605785,"sku":"GST400-003","price":122.82,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0933\/7765\/9225\/files\/walbro_gss342_255lph_in-tank_fuel_pump_kit_-_honda_civic_type_r_ep3_2001_2006__47_25.jpg?v=1745503559"},{"product_id":"mtec-performance-drilled-brake-discs-front-bmw-3-series-m3-coupe-e46","title":"MTEC Performance Drilled Brake Discs (Front) - BMW M3 Coupe E46","description":"\u003cp\u003eMTEC Performance Brake Discs are machined using state of the art CNC machinery to ensure a precision fit, and are a very popular choice for both factory \u0026amp; high performance cars.\u003c\/p\u003e\n\u003cp\u003eRival Performance recommend c-hook or the grooved brake disc design for best braking results when on track.\u003c\/p\u003e\n\u003cp\u003eDirect replacement to the original OE spec brake discs and are manufactured to the highest standards.\u003c\/p\u003e\n\u003cp\u003eContains 2x brake discs.\u003c\/p\u003e\n\u003cp\u003eMTEC Performance Brake Disc features:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eIncreases Braking Performance\u003c\/li\u003e\n\u003cli\u003eReduced Stopping Distances\u003c\/li\u003e\n\u003cli\u003eLong Disc Life\u003c\/li\u003e\n\u003cli\u003eLightweight\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eBrake Disc Coating:\u003c\/h3\u003e\n\u003cp\u003eAll MTEC performance brake discs come untreated unless specified, however MTEC offer an in-house coating treatment which prevents corrosion, prolongs brake disc life and provides a smart finish. This coating treatment can be completed is silver, black or gold edition.\u003c\/p\u003e\n\u003cp\u003enote: image is for illustration purposes and may differ on delivery\u003c\/p\u003e","brand":"MTEC","offers":[{"title":"Default Title","offer_id":54491724087641,"sku":"MTEC4025HCLH-MTEC4025HCRH","price":129.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0933\/7765\/9225\/files\/BMWDrilled.jpg?v=1745505224"},{"product_id":"eibach-pro-lowering-spring-kit-20mm-f-10mm-r-bmw-3-series-m3-coupe-e46","title":"Eibach Pro Lowering Spring Kit (20mm F|10mm R) - BMW M3 Coupe E46","description":"\u003cp\u003eEibach Pro Lowering Spring Kits are an ideal choice if wanting to lower the car and still retain a good level of driving comfort.\u003c\/p\u003e\n\u003cp\u003eBased on Motorsport developments and a myriad of test series in Eibachs own test development centre, Eibach Pro kits are designed in accordance to the latest insights of driving dynamics.\u003c\/p\u003e\n\u003cp\u003eFeatures a balanced relationship between sport looks, increased safety and added performance while offering driving pleasure at the same time.\u003c\/p\u003e\n\u003cp\u003eProvides a sense of sporty road performance when changing direction, and when pulling through curves at high speeds while not sacrificing any comfort.\u003c\/p\u003e\n\u003cp\u003eCan be used with factory or aftermarket shock absorber dampers.\u003c\/p\u003e\n\u003cp\u003eSupplied as a complete set.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eLowers (approx): \u003cspan style=\"font-size: 0.875rem;\"\u003e20mm front | 10mm rear\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003enote: image is for illustration purposes and may differ on delivery\u003c\/p\u003e","brand":"Eibach","offers":[{"title":"Default Title","offer_id":54492002746713,"sku":"E10-20-001-02-22","price":341.48,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0933\/7765\/9225\/files\/eibach_pro_kit_lowering_springs_-_honda_civic_type_r_ep3_2001_2006_1_1_1_2_1_1_1_1_1_2_1.jpg?v=1745507462"},{"product_id":"superpro-front-rear-chassis-bush-kit-with-arb-mounts-links-road-use-bmw-3-series-m3-coupe-e46-bmw-z4-m-e85-e86","title":"SuperPro Front \u0026 Rear Chassis Bush Kit with ARB Mounts \u0026 Links (Road Use) -  BMW 3 Series M3 Coupe E46 \u0026 BMW Z4 M E85\/E86","description":"\u003cp\u003eSuperPro's innovative design and superior materials offer dramatic improvements in handling and give a more precise feel through the corners.\u003c\/p\u003e\n\u003cp\u003eSuperPro bushes are used by racers in various Motorsport competitions.\u003c\/p\u003e\n\u003cp\u003eUnlike some polyurethane bushes, SuperPro bushes show no increase in vibration or ride harshness, an attribute that makes them an good choice whether on road or track.\u003c\/p\u003e\n\u003ch2\u003eModel Select Notice:\u003c\/h2\u003e\n\u003cp\u003e60mm OD bushes used on the front lower control arms was standard on pre-February 2002 models, but they may have since been updated to the later 66mm diameter. Please measure for the correct size you require prior to ordering.\u003c\/p\u003e\n\u003cp\u003eDesigned for road, race and track use.\u003c\/p\u003e\n\u003cp\u003eSuperPro Polyurethane Bush Kit features:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eImproved handling and stability\u003c\/li\u003e\n\u003cli\u003eLong life, low maintenance\u003c\/li\u003e\n\u003cli\u003ePrecision engineered for an exact fit\u003c\/li\u003e\n\u003cli\u003eIncreased tyre and suspension life\u003c\/li\u003e\n\u003cli\u003eNo increase in vibration and road noise\u003c\/li\u003e\n\u003cli\u003e3 years\/36,000 miles guarantee\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eSuperPro Kit includes:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e1x SPF2532K (60mm) or SPF2556K (66mm)- FRONT LOWER CONTROL ARM REAR BUSH KIT\u003c\/li\u003e\n\u003cli\u003e1x SPF2569-26K - FRONT SWAYBAR MOUNT BUSHING\u003c\/li\u003e\n\u003cli\u003e1x SPF2146K - REAR LOWER TRAILING ARM FRONT BUSH KIT\u003c\/li\u003e\n\u003cli\u003e1x SPF2419K - REAR SWAYBAR LINK BUSH KIT\u003c\/li\u003e\n\u003cli\u003e1x SPF2421K - REAR LOWER CONTROL ARM INNER\u003c\/li\u003e\n\u003cli\u003e1x SPF2422K - REAR UPPER CONTROL KIT\u003c\/li\u003e\n\u003cli\u003e1x SPF2570-21.5K - REAR SWAYBAR MOUNT BUSHING\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eSuperPro Chassis Fitment List:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eBMW 3 Series E46 Rear Wheel Drive (1998 to 2007)\u003c\/li\u003e\n\u003cli\u003eBMW 3 Series E46 All-wheel Drive (2000 to 2005)\u003c\/li\u003e\n\u003cli\u003eBMW Z4 E85 Rear Wheel Drive (2003 to 2009)\u003c\/li\u003e\n\u003cli\u003eBMW Z4 E86 Rear Wheel Drive (2006 to 2009)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003enote: image is for illustration purposes and may differ on delivery\u003c\/p\u003e","brand":"SuperPro","offers":[{"title":"60mm OD","offer_id":54495795118425,"sku":"KIT5166K","price":508.09,"currency_code":"GBP","in_stock":true},{"title":"66mm OD","offer_id":54495795151193,"sku":"KIT5167K","price":501.41,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0933\/7765\/9225\/files\/kit191k_1_1_1_1_1.jpg?v=1745534281"},{"product_id":"superpro-front-rear-chassis-bush-kit-with-arb-mounts-links-race-track-use-bmw-3-series-m3-coupe-e46-bmw-z4-m-e85-e86","title":"SuperPro Front \u0026 Rear Chassis Bush Kit with ARB Mounts \u0026 Links (Race \u0026 Track Use) -  BMW 3 Series M3 Coupe E46 \u0026 BMW Z4 M E85\/E86","description":"\u003cp\u003eSuperPro's innovative design and superior materials offer dramatic improvements in handling and give a more precise feel through the corners.\u003c\/p\u003e\n\u003cp\u003eSuperPro bushes are used by racers in various Motorsport competitions.\u003c\/p\u003e\n\u003cp\u003eUnlike some polyurethane bushes, SuperPro bushes show no increase in vibration or ride harshness, an attribute that makes them an good choice whether on road or track.\u003c\/p\u003e\n\u003cp\u003eProvides caster increase which is noticed when on track due to increasing steering effort, straight line tracking, as well as improving high speed stability \u0026amp; cornering effectiveness.\u003c\/p\u003e\n\u003cp\u003eTo be only used with 66mm OD bushes on the front lower control arms. Please measure for the correct size you require prior to ordering.\u003c\/p\u003e\n\u003cp\u003eDesigned for road, race and track use.\u003c\/p\u003e\n\u003cp\u003eSuperPro Polyurethane Bush Kit features:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eImproved handling and stability\u003c\/li\u003e\n\u003cli\u003eLong life, low maintenance\u003c\/li\u003e\n\u003cli\u003ePrecision engineered for an exact fit\u003c\/li\u003e\n\u003cli\u003eIncreased tyre and suspension life\u003c\/li\u003e\n\u003cli\u003eNo increase in vibration and road noise\u003c\/li\u003e\n\u003cli\u003e3 years\/36,000 miles guarantee\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eSuperPro Kit includes:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e1x SPF2558K - FRONT LOWER CONTROL ARM REAR BUSH DOUBLE OFFSET\u003c\/li\u003e\n\u003cli\u003e1x SPF2569-26K - FRONT SWAYBAR MOUNT BUSHING\u003c\/li\u003e\n\u003cli\u003e1x SPF2146K - REAR LOWER TRAILING ARM FRONT\u003c\/li\u003e\n\u003cli\u003e1x SPF2419K - REAR SWAYBAR LINK BUSH KIT\u003c\/li\u003e\n\u003cli\u003e1x SPF2421K - REAR LOWER CONTROL ARM INNER\u003c\/li\u003e\n\u003cli\u003e1x SPF2422K - REAR UPPER CONTROL KIT\u003c\/li\u003e\n\u003cli\u003e1x SPF2570-21.5K - REAR SWAYBAR MOUNT BUSHING\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eSuperPro Chassis Fitment List:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eBMW 3 Series E46 Rear Wheel Drive (1998 to 2007)\u003c\/li\u003e\n\u003cli\u003eBMW 3 Series E46 All-wheel Drive (2000 to 2005)\u003c\/li\u003e\n\u003cli\u003eBMW Z4 E85 Rear Wheel Drive (2003 to 2009)\u003c\/li\u003e\n\u003cli\u003eBMW Z4 E86 Rear Wheel Drive (2006 to 2009)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003enote: image is for illustration purposes and may differ on delivery\u003c\/p\u003e","brand":"SuperPro","offers":[{"title":"Yes, it's correct for my application.","offer_id":54495795282265,"sku":"KIT5168K","price":538.58,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0933\/7765\/9225\/files\/kit191k_1_1_1_1.jpg?v=1745534284"},{"product_id":"superpro-front-rear-chassis-bush-kit-race-track-use-bmw-3-series-m3-coupe-e46-bmw-z4-m-e85-e86","title":"SuperPro Front \u0026 Rear Chassis Bush Kit (Race \u0026 Track Use) -  BMW 3 Series M3 Coupe E46 \u0026 BMW Z4 M E85\/E86","description":"\u003cp\u003eSuperPro's innovative design and superior materials offer dramatic improvements in handling and give a more precise feel through the corners.\u003c\/p\u003e\n\u003cp\u003eSuperPro bushes are used by racers in various Motorsport competitions.\u003c\/p\u003e\n\u003cp\u003eUnlike some polyurethane bushes, SuperPro bushes show no increase in vibration or ride harshness, an attribute that makes them an good choice whether on road or track.\u003c\/p\u003e\n\u003cp\u003eProvides caster increase which is noticed when on track due to increasing steering effort, straight line tracking, as well as improving high speed stability \u0026amp; cornering effectiveness.\u003c\/p\u003e\n\u003cp\u003eTo be only used with 66mm OD bushes on the front lower control arms. Please measure for the correct size you require prior to ordering.\u003c\/p\u003e\n\u003cp\u003eDesigned for road, race and track use.\u003c\/p\u003e\n\u003cp\u003eSuperPro Polyurethane Bush Kit features:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eImproved handling and stability\u003c\/li\u003e\n\u003cli\u003eLong life, low maintenance\u003c\/li\u003e\n\u003cli\u003ePrecision engineered for an exact fit\u003c\/li\u003e\n\u003cli\u003eIncreased tyre and suspension life\u003c\/li\u003e\n\u003cli\u003eNo increase in vibration and road noise\u003c\/li\u003e\n\u003cli\u003e3 years\/36,000 miles guarantee\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eSuperPro Kit includes:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e1x SPF2146K - REAR LOWER TRAILING ARM FRONT\u003c\/li\u003e\n\u003cli\u003e1x SPF2421K - REAR LOWER CONTROL ARM INNER\u003c\/li\u003e\n\u003cli\u003e1x SPF2422K - REAR UPPER CONTROL KIT\u003c\/li\u003e\n\u003cli\u003e1x SPF2558K - FRONT LOWER CONTROL ARM REAR BUSH DOUBLE OFFSET\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eSuperPro Chassis Fitment List:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eBMW 3 Series E46 Rear Wheel Drive (1998 to 2007)\u003c\/li\u003e\n\u003cli\u003eBMW 3 Series E46 All-wheel Drive (2000 to 2005)\u003c\/li\u003e\n\u003cli\u003eBMW Z4 E85 Rear Wheel Drive (2003 to 2009)\u003c\/li\u003e\n\u003cli\u003eBMW Z4 E86 Rear Wheel Drive (2006 to 2009)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003enote: image is for illustration purposes and may differ on delivery\u003c\/p\u003e","brand":"SuperPro","offers":[{"title":"Yes, it's correct for my application.","offer_id":54495795413337,"sku":"KIT5168K-RG","price":411.11,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0933\/7765\/9225\/files\/kit191k_1_1_1.jpg?v=1745534287"},{"product_id":"superpro-front-rear-chassis-bush-kit-road-use-bmw-3-series-m3-coupe-e46-bmw-z4-m-e85-e86","title":"SuperPro Front \u0026 Rear Chassis Bush Kit (Road Use) -  BMW 3 Series M3 Coupe E46 \u0026 BMW Z4 M E85\/E86","description":"\u003cp\u003eSuperPro's innovative design and superior materials offer dramatic improvements in handling and give a more precise feel through the corners.\u003c\/p\u003e\n\u003cp\u003eSuperPro bushes are used by racers in various Motorsport competitions.\u003c\/p\u003e\n\u003cp\u003eUnlike some polyurethane bushes, SuperPro bushes show no increase in vibration or ride harshness, an attribute that makes them an good choice whether on road or track.\u003c\/p\u003e\n\u003ch2\u003eModel Select Notice:\u003c\/h2\u003e\n\u003cp\u003e60mm OD bushes used on the front lower control arms was standard on pre-February 2002 models, but they may have since been updated to the later 66mm diameter. Please measure for the correct size you require prior to ordering.\u003c\/p\u003e\n\u003cp\u003eDesigned for road, race and track use.\u003c\/p\u003e\n\u003cp\u003eSuperPro Polyurethane Bush Kit features:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eImproved handling and stability\u003c\/li\u003e\n\u003cli\u003eLong life, low maintenance\u003c\/li\u003e\n\u003cli\u003ePrecision engineered for an exact fit\u003c\/li\u003e\n\u003cli\u003eIncreased tyre and suspension life\u003c\/li\u003e\n\u003cli\u003eNo increase in vibration and road noise\u003c\/li\u003e\n\u003cli\u003e3 years\/36,000 miles guarantee\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eSuperPro Kit includes:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e1x SPF2530K (60mm) or SPF2530K (66mm) - FRONT LOWER CONTROL ARM REAR BUSH KIT\u003c\/li\u003e\n\u003cli\u003e1x SPF2146K - REAR LOWER TRAILING ARM FRONT BUSH KIT\u003c\/li\u003e\n\u003cli\u003e1x SPF2421K - REAR LOWER CONTROL ARM INNER BUSH KIT\u003c\/li\u003e\n\u003cli\u003e1x SPF2422K - REAR UPPER CONTROL BUSH KIT\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eSuperPro Chassis Fitment List:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eBMW 3 Series E46 Rear Wheel Drive (1998 to 2007)\u003c\/li\u003e\n\u003cli\u003eBMW 3 Series E46 All-wheel Drive (2000 to 2005)\u003c\/li\u003e\n\u003cli\u003eBMW Z4 E85 Rear Wheel Drive (2003 to 2009)\u003c\/li\u003e\n\u003cli\u003eBMW Z4 E86 Rear Wheel Drive (2006 to 2009)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003enote: image is for illustration purposes and may differ on delivery\u003c\/p\u003e","brand":"SuperPro","offers":[{"title":"60mm OD","offer_id":54495796527449,"sku":"KIT5165K-RG","price":380.6,"currency_code":"GBP","in_stock":true},{"title":"66mm OD","offer_id":54495796560217,"sku":"KIT5166K-RG","price":380.6,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0933\/7765\/9225\/files\/kit191k_1_1.jpg?v=1745534297"},{"product_id":"pbs-protrack-performance-brake-pads-rear-bmw-3-series-m3-coupe-e46-amp-z4-e85-e86","title":"PBS ProTrack Performance Brake Pads (REAR) - BMW 3 Series M3 Coupe E46 \u0026 Z4 E85\/E86","description":"\u003cp\u003ePBS Protrack Brake Pads are high performance track brake pads that provide a great bite with pedal feel from cold.\u003c\/p\u003e\n\u003cp\u003eWith excellent brake fade resistance and an operating temperature of 0 to 700°C, this pad posses a lower initial bite with a great pedal feel and stopping power, making them a perfect for light track use, wet conditions or for those with low grip control tyres.\u003c\/p\u003e\n\u003cp\u003ePerfect for sprints, time attack and circuit racing.\u003c\/p\u003e\n\u003cp\u003eWhen on track, brake pads are subjected to pressure from caliper pistons as well as high friction heat. Performance Brake Solutions have undergone extensive brake pad testing in order to keep the brake pad remaining flat throughout the race in order to offer optimal performance. The technology used on the high quality steel backing plates ensure that the brake pad compound has the best holding capabilities under extreme driving conditions.\u003c\/p\u003e\n\u003cp\u003eThe Protrack brake pad material is 0.40 to 0.48mu, which provides progressive and predictable braking power.\u003c\/p\u003e\n\u003cp\u003eMade by racing drivers for racing drivers.\u003c\/p\u003e\n\u003cp\u003eSupplied as a set.\u003c\/p\u003e\n\u003cp\u003eA direct fit for:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eBMW 3 Series 330i Coupe E46\u003c\/li\u003e\n\u003cli\u003eBMW 3 Series M3 Coupe E46\u003c\/li\u003e\n\u003cli\u003eBMW Z4 M Roadster E85\u003c\/li\u003e\n\u003cli\u003eBMW Z4 M Coupe E86\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003ePBS Brake Pad Bedding-in Process:\u003c\/p\u003e\n\u003cp\u003ePBS brake pads are put through a heat curing treatment during the manufacturing process and 'burns out' unwanted materials in advance, reducing the gases that can cause brake fade. Because of this treatment, PBS brake pads only require light 'bedding in'.\u003c\/p\u003e\n\u003cp\u003eIt is recommend to perform 10 stops at low pressure and low temperature from 90MPH to approximately 50MPH, and the distance between each brake stop is to be approximately 600 to 800 meters.\u003c\/p\u003e\n\u003cp\u003ePBS brake pads should be bedded in until they are up to mid range working temperature and then allowed to cool properly. Doing this process will help to remove any gases that were in the brake pad compound and will create a perfect contact pattern between the brake disc and the brake pads.\u003c\/p\u003e\n\u003cp\u003enote: image is for illustration purposes and may differ on delivery\u003c\/p\u003e","brand":"PBS","offers":[{"title":"Default Title","offer_id":54496556908889,"sku":"8422PT","price":139.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0933\/7765\/9225\/files\/pbs_protrack_11.jpg?v=1745544082"},{"product_id":"pbs-prorace-performance-brake-pads-front-bmw-3-series-m3-coupe-e46-amp-z4-m-e85-e86","title":"PBS ProRace Performance Brake Pads (FRONT) - BMW 3 Series M3 Coupe E46 \u0026 Z4 M E85\/E86","description":"\u003cp\u003ePBS Prorace Brake Pads are high performance track\/race brake pads that provide a excellent bite with pedal feel from cold.\u003c\/p\u003e\n\u003cp\u003eWith excellent brake fade resistance and an operating temperature of 0 to 800°C, this pad posses a high initial bite with excellent pedal feel that will handle most serious braking conditions.\u003c\/p\u003e\n\u003cp\u003eFeatures NUCAP permanent bond NRS, which are hundreds of steel hooks that hold the pad compound onto the backing plate, and massively reduces the risk of pad compound coming apart from the backing plate under heavy track use.\u003c\/p\u003e\n\u003cp\u003ePerfect for sprints, time attack and circuit racing.\u003c\/p\u003e\n\u003cp\u003eWhen on track, brake pads are subjected to pressure from caliper pistons as well as high friction heat. Performance Brake Solutions have undergone extensive brake pad testing in order to keep the brake pad remaining flat throughout the race in order to offer optimal performance. The technology used on the high quality steel backing plates ensure that the brake pad compound has the best holding capabilities under extreme driving conditions.\u003c\/p\u003e\n\u003cp\u003eThe Prorace brake pad material is 0.36 to 0.58mu, which provides incredible stopping power.\u003c\/p\u003e\n\u003cp\u003eMade by racing drivers for racing drivers.\u003c\/p\u003e\n\u003cp\u003eSupplied as a set.\u003c\/p\u003e\n\u003cp\u003eA direct fit for:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eBMW 3 Series 330i Coupe E46\u003c\/li\u003e\n\u003cli\u003eBMW 3 Series M3 Coupe E46\u003c\/li\u003e\n\u003cli\u003eBMW Z4 M Roadster E85\u003c\/li\u003e\n\u003cli\u003eBMW Z4 M Coupe E86\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003ePBS Brake Pad Bedding-in Process:\u003c\/p\u003e\n\u003cp\u003ePBS brake pads are put through a heat curing treatment during the manufacturing process and 'burns out' unwanted materials in advance, reducing the gases that can cause brake fade. Because of this treatment, PBS brake pads only require light 'bedding in'.\u003c\/p\u003e\n\u003cp\u003eIt is recommend to perform 10 stops at low pressure and low temperature from 90MPH to approximately 50MPH, and the distance between each brake stop is to be approximately 600 to 800 meters.\u003c\/p\u003e\n\u003cp\u003ePBS brake pads should be bedded in until they are up to mid range working temperature and then allowed to cool properly. Doing this process will help to remove any gases that were in the brake pad compound and will create a perfect contact pattern between the brake disc and the brake pads.\u003c\/p\u003e\n\u003cp\u003enote: image is for illustration purposes and may differ on delivery\u003c\/p\u003e","brand":"PBS","offers":[{"title":"Yes these fit my application","offer_id":54496556941657,"sku":"1364PR","price":193.94,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0933\/7765\/9225\/files\/pbs_prorace_1_5.jpg?v=1745544091"},{"product_id":"scorpion-exhausts-sports-de-cat-bmw-e46-m3-2001-2006","title":"Scorpion Exhausts Sports\/De-cat - BMW E46 M3 2001-2006","description":"\u003cp\u003eScorpion exhausts are hand-built in the UK with precision and purpose. Each system is crafted from aerospace-grade T304 stainless steel and developed using the same tools, materials, and techniques trusted by leading race teams and performance specialists. The result is a perfect balance of power, tone, and reliability - built to perform on road or track.\u003c\/p\u003e\n\n\u003ch4\u003eWhy Choose Scorpion\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBritish-built quality\u003c\/strong\u003e - designed, developed, and hand-fabricated in Derbyshire.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eReal performance gains\u003c\/strong\u003e - optimised gas flow and reduced back pressure for sharper throttle response.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eRefined sound\u003c\/strong\u003e - deep, purposeful tone without harsh resonance or motorway drone.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePrecision fitment\u003c\/strong\u003e - built to factory tolerances for a direct bolt-on installation.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLifetime warranty\u003c\/strong\u003e on materials and craftsmanship (excluding race\/track use).\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch4\u003eConstruction \u0026amp; Design\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003eManufactured entirely from \u003cstrong\u003eT304 stainless steel\u003c\/strong\u003e for superior strength and corrosion resistance.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMandrel-bent pipework\u003c\/strong\u003e ensures consistent internal diameter and optimised flow through every bend.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eTIG-welded joints\u003c\/strong\u003e and \u003cstrong\u003eCNC flanges\u003c\/strong\u003e deliver a precision fit and leak-free seal.\u003c\/li\u003e\n  \u003cli\u003eAvailable in multiple configurations including \u003cem\u003eresonated, non-resonated, valved, and non-valved\u003c\/em\u003e setups.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch4\u003eSound Options\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eResonated:\u003c\/strong\u003e Balanced tone with OEM-like refinement - ideal for daily use.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eNon-resonated:\u003c\/strong\u003e Louder and more aggressive for a raw, performance-driven sound.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eValved:\u003c\/strong\u003e Switchable tone control (where supported) for adaptable volume and character.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch4\u003eEmissions \u0026amp; Legal Information\u003c\/h4\u003e\n\u003cp\u003e\n\u003cstrong\u003eSports Cat\u003c\/strong\u003e systems are designed to help maintain emissions control but may not guarantee MOT compliance.\u003cbr\u003e\n\u003cstrong\u003eDe-cat\u003c\/strong\u003e and \u003cstrong\u003eOPF\/GPF-delete\u003c\/strong\u003e products are intended for off-road or track use only.\u003cbr\u003e\nAlways ensure your chosen configuration meets local emissions and road-use regulations before installation.\n\u003c\/p\u003e\n\n\u003ch4\u003eFitment \u0026amp; Compatibility\u003c\/h4\u003e\n\u003cp\u003eScorpion systems are designed to mount directly to factory points and integrate with OEM or Scorpion components unless otherwise stated. Most fit without modification, though professional installation is recommended to ensure correct alignment, clearance, and sealing.\u003c\/p\u003e\n\n\u003ch4\u003eWhy Buy from Rival Performance\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOfficial Scorpion Exhausts dealer\u003c\/strong\u003e - all stock is 100% genuine and supplied directly from Scorpion UK.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHands-on product knowledge\u003c\/strong\u003e - we fit, run, and tune Scorpion systems daily.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWorkshop services\u003c\/strong\u003e available including fitting, diagnostics, and dyno testing at our Newcastle HQ.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003e\u003cem\u003eMade in the UK | Backed by Scorpion’s lifetime warranty\u003c\/em\u003e\u003c\/p\u003e","brand":"Scorpion Exhausts","offers":[{"title":"De-cat","offer_id":56606450450777,"sku":"SBMC050","price":356.51,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0933\/7765\/9225\/files\/602BM_3quarts-1200x800.jpg?v=1762903017"},{"product_id":"scorpion-exhausts-rear-silencer-bmw-e46-m3-2001-2006","title":"Scorpion Exhausts Rear Silencer - BMW E46 M3 2001-2006","description":"\u003cp\u003eScorpion exhausts are hand-built in the UK with precision and purpose. Each system is crafted from aerospace-grade T304 stainless steel and developed using the same tools, materials, and techniques trusted by leading race teams and performance specialists. The result is a perfect balance of power, tone, and reliability - built to perform on road or track.\u003c\/p\u003e\n\n\u003ch4\u003eWhy Choose Scorpion\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBritish-built quality\u003c\/strong\u003e - designed, developed, and hand-fabricated in Derbyshire.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eReal performance gains\u003c\/strong\u003e - optimised gas flow and reduced back pressure for sharper throttle response.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eRefined sound\u003c\/strong\u003e - deep, purposeful tone without harsh resonance or motorway drone.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePrecision fitment\u003c\/strong\u003e - built to factory tolerances for a direct bolt-on installation.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLifetime warranty\u003c\/strong\u003e on materials and craftsmanship (excluding race\/track use).\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch4\u003eConstruction \u0026amp; Design\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003eManufactured entirely from \u003cstrong\u003eT304 stainless steel\u003c\/strong\u003e for superior strength and corrosion resistance.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMandrel-bent pipework\u003c\/strong\u003e ensures consistent internal diameter and optimised flow through every bend.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eTIG-welded joints\u003c\/strong\u003e and \u003cstrong\u003eCNC flanges\u003c\/strong\u003e deliver a precision fit and leak-free seal.\u003c\/li\u003e\n  \u003cli\u003eAvailable in multiple configurations including \u003cem\u003eresonated, non-resonated, valved, and non-valved\u003c\/em\u003e setups.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch4\u003eSound Options\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eResonated:\u003c\/strong\u003e Balanced tone with OEM-like refinement - ideal for daily use.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eNon-resonated:\u003c\/strong\u003e Louder and more aggressive for a raw, performance-driven sound.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eValved:\u003c\/strong\u003e Switchable tone control (where supported) for adaptable volume and character.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch4\u003eEmissions \u0026amp; Legal Information\u003c\/h4\u003e\n\u003cp\u003e\n\u003cstrong\u003eSports Cat\u003c\/strong\u003e systems are designed to help maintain emissions control but may not guarantee MOT compliance.\u003cbr\u003e\n\u003cstrong\u003eDe-cat\u003c\/strong\u003e and \u003cstrong\u003eOPF\/GPF-delete\u003c\/strong\u003e products are intended for off-road or track use only.\u003cbr\u003e\nAlways ensure your chosen configuration meets local emissions and road-use regulations before installation.\n\u003c\/p\u003e\n\n\u003ch4\u003eFitment \u0026amp; Compatibility\u003c\/h4\u003e\n\u003cp\u003eScorpion systems are designed to mount directly to factory points and integrate with OEM or Scorpion components unless otherwise stated. Most fit without modification, though professional installation is recommended to ensure correct alignment, clearance, and sealing.\u003c\/p\u003e\n\n\u003ch4\u003eWhy Buy from Rival Performance\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOfficial Scorpion Exhausts dealer\u003c\/strong\u003e - all stock is 100% genuine and supplied directly from Scorpion UK.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHands-on product knowledge\u003c\/strong\u003e - we fit, run, and tune Scorpion systems daily.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWorkshop services\u003c\/strong\u003e available including fitting, diagnostics, and dyno testing at our Newcastle HQ.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003e\u003cem\u003eMade in the UK | Backed by Scorpion’s lifetime warranty\u003c\/em\u003e\u003c\/p\u003e","brand":"Scorpion Exhausts","offers":[{"title":"Daytona","offer_id":56606686413145,"sku":"SBMB050","price":922.33,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0933\/7765\/9225\/files\/BMW_m3_e46_SBMB050_3_quarter-1200x800.jpg?v=1762905556"},{"product_id":"scorpion-exhausts-cat-back-bmw-e46-m3-2001-2006","title":"Scorpion Exhausts Cat-Back - BMW E46 M3 2001-2006","description":"\u003cp\u003eScorpion exhausts are hand-built in the UK with precision and purpose. Each system is crafted from aerospace-grade T304 stainless steel and developed using the same tools, materials, and techniques trusted by leading race teams and performance specialists. The result is a perfect balance of power, tone, and reliability - built to perform on road or track.\u003c\/p\u003e\n\n\u003ch4\u003eWhy Choose Scorpion\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBritish-built quality\u003c\/strong\u003e - designed, developed, and hand-fabricated in Derbyshire.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eReal performance gains\u003c\/strong\u003e - optimised gas flow and reduced back pressure for sharper throttle response.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eRefined sound\u003c\/strong\u003e - deep, purposeful tone without harsh resonance or motorway drone.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePrecision fitment\u003c\/strong\u003e - built to factory tolerances for a direct bolt-on installation.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLifetime warranty\u003c\/strong\u003e on materials and craftsmanship (excluding race\/track use).\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch4\u003eConstruction \u0026amp; Design\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003eManufactured entirely from \u003cstrong\u003eT304 stainless steel\u003c\/strong\u003e for superior strength and corrosion resistance.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMandrel-bent pipework\u003c\/strong\u003e ensures consistent internal diameter and optimised flow through every bend.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eTIG-welded joints\u003c\/strong\u003e and \u003cstrong\u003eCNC flanges\u003c\/strong\u003e deliver a precision fit and leak-free seal.\u003c\/li\u003e\n  \u003cli\u003eAvailable in multiple configurations including \u003cem\u003eresonated, non-resonated, valved, and non-valved\u003c\/em\u003e setups.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch4\u003eSound Options\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eResonated:\u003c\/strong\u003e Balanced tone with OEM-like refinement - ideal for daily use.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eNon-resonated:\u003c\/strong\u003e Louder and more aggressive for a raw, performance-driven sound.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eValved:\u003c\/strong\u003e Switchable tone control (where supported) for adaptable volume and character.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch4\u003eEmissions \u0026amp; Legal Information\u003c\/h4\u003e\n\u003cp\u003e\n\u003cstrong\u003eSports Cat\u003c\/strong\u003e systems are designed to help maintain emissions control but may not guarantee MOT compliance.\u003cbr\u003e\n\u003cstrong\u003eDe-cat\u003c\/strong\u003e and \u003cstrong\u003eOPF\/GPF-delete\u003c\/strong\u003e products are intended for off-road or track use only.\u003cbr\u003e\nAlways ensure your chosen configuration meets local emissions and road-use regulations before installation.\n\u003c\/p\u003e\n\n\u003ch4\u003eFitment \u0026amp; Compatibility\u003c\/h4\u003e\n\u003cp\u003eScorpion systems are designed to mount directly to factory points and integrate with OEM or Scorpion components unless otherwise stated. Most fit without modification, though professional installation is recommended to ensure correct alignment, clearance, and sealing.\u003c\/p\u003e\n\n\u003ch4\u003eWhy Buy from Rival Performance\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOfficial Scorpion Exhausts dealer\u003c\/strong\u003e - all stock is 100% genuine and supplied directly from Scorpion UK.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHands-on product knowledge\u003c\/strong\u003e - we fit, run, and tune Scorpion systems daily.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWorkshop services\u003c\/strong\u003e available including fitting, diagnostics, and dyno testing at our Newcastle HQ.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003e\u003cem\u003eMade in the UK | Backed by Scorpion’s lifetime warranty\u003c\/em\u003e\u003c\/p\u003e","brand":"Scorpion Exhausts","offers":[{"title":"Resonated \/ Daytona","offer_id":56606686576985,"sku":"SBM050","price":1284.12,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0933\/7765\/9225\/files\/SBM050_kit_3quarts-1200x800.jpg?v=1762905564"},{"product_id":"scorpion-exhausts-centre-replacement-bmw-e46-m3-2001-2006","title":"Scorpion Exhausts Centre Replacement - BMW E46 M3 2001-2006","description":"\u003cp\u003eScorpion exhausts are hand-built in the UK with precision and purpose. Each system is crafted from aerospace-grade T304 stainless steel and developed using the same tools, materials, and techniques trusted by leading race teams and performance specialists. The result is a perfect balance of power, tone, and reliability - built to perform on road or track.\u003c\/p\u003e\n\n\u003ch4\u003eWhy Choose Scorpion\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBritish-built quality\u003c\/strong\u003e - designed, developed, and hand-fabricated in Derbyshire.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eReal performance gains\u003c\/strong\u003e - optimised gas flow and reduced back pressure for sharper throttle response.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eRefined sound\u003c\/strong\u003e - deep, purposeful tone without harsh resonance or motorway drone.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePrecision fitment\u003c\/strong\u003e - built to factory tolerances for a direct bolt-on installation.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLifetime warranty\u003c\/strong\u003e on materials and craftsmanship (excluding race\/track use).\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch4\u003eConstruction \u0026amp; Design\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003eManufactured entirely from \u003cstrong\u003eT304 stainless steel\u003c\/strong\u003e for superior strength and corrosion resistance.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMandrel-bent pipework\u003c\/strong\u003e ensures consistent internal diameter and optimised flow through every bend.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eTIG-welded joints\u003c\/strong\u003e and \u003cstrong\u003eCNC flanges\u003c\/strong\u003e deliver a precision fit and leak-free seal.\u003c\/li\u003e\n  \u003cli\u003eAvailable in multiple configurations including \u003cem\u003eresonated, non-resonated, valved, and non-valved\u003c\/em\u003e setups.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch4\u003eSound Options\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eResonated:\u003c\/strong\u003e Balanced tone with OEM-like refinement - ideal for daily use.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eNon-resonated:\u003c\/strong\u003e Louder and more aggressive for a raw, performance-driven sound.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eValved:\u003c\/strong\u003e Switchable tone control (where supported) for adaptable volume and character.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch4\u003eEmissions \u0026amp; Legal Information\u003c\/h4\u003e\n\u003cp\u003e\n\u003cstrong\u003eSports Cat\u003c\/strong\u003e systems are designed to help maintain emissions control but may not guarantee MOT compliance.\u003cbr\u003e\n\u003cstrong\u003eDe-cat\u003c\/strong\u003e and \u003cstrong\u003eOPF\/GPF-delete\u003c\/strong\u003e products are intended for off-road or track use only.\u003cbr\u003e\nAlways ensure your chosen configuration meets local emissions and road-use regulations before installation.\n\u003c\/p\u003e\n\n\u003ch4\u003eFitment \u0026amp; Compatibility\u003c\/h4\u003e\n\u003cp\u003eScorpion systems are designed to mount directly to factory points and integrate with OEM or Scorpion components unless otherwise stated. Most fit without modification, though professional installation is recommended to ensure correct alignment, clearance, and sealing.\u003c\/p\u003e\n\n\u003ch4\u003eWhy Buy from Rival Performance\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOfficial Scorpion Exhausts dealer\u003c\/strong\u003e - all stock is 100% genuine and supplied directly from Scorpion UK.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHands-on product knowledge\u003c\/strong\u003e - we fit, run, and tune Scorpion systems daily.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWorkshop services\u003c\/strong\u003e available including fitting, diagnostics, and dyno testing at our Newcastle HQ.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003e\u003cem\u003eMade in the UK | Backed by Scorpion’s lifetime warranty\u003c\/em\u003e\u003c\/p\u003e","brand":"Scorpion Exhausts","offers":[{"title":"Default Title","offer_id":56606686609753,"sku":"SBMR050","price":654.61,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0933\/7765\/9225\/files\/SBMR050_3QUARTER-1200x800.jpg?v=1762905564"},{"product_id":"hel-performance-braided-brake-lines-bmw-3-series-e46-m3-2001-2006","title":"HEL Performance Braided Brake Lines - BMW 3 Series E46 M3 (2001-2006)","description":"\u003cp\u003eThe HEL Performance Braided Brake Lines - BMW 3 Series E46 M3 (2001-2006) are precision-built in-house, using stainless steel braided hose and CNC-machined fittings. Every kit is fully assembled, machine-crimped, and supplied with all the necessary components for a direct, straightforward fit.\u003c\/p\u003e\n\n\u003ch4\u003eWhy Upgrade to HEL Brake Lines?\u003c\/h4\u003e\n\u003cp\u003e\u003cstrong\u003eSharper, more consistent braking.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eRubber brake hoses expand under pressure, especially during hard braking - creating a soft, unpredictable pedal feel. HEL braided hoses use a three-layer construction to eliminate this issue, delivering a firm, responsive pedal and consistent braking performance in all conditions. While rubber hoses typically need replacing every five years, HEL lines are built to last a lifetime.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eUnmatched durability.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eEach hose features a PTFE inner core for outstanding chemical and heat resistance, surrounded by a high-tensile stainless steel braid for strength and protection. A coloured or clear PVC outer layer adds a clean finish and prevents paintwork or panels from being marked. Unlike others who use zinc fittings, HEL uses only 303\/304-grade stainless steel throughout - no compromises.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eTested and proven worldwide.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eEvery HEL kit is manufactured and tested to extremes - in the lab and on the racetrack. This quality control is backed by a no-quibble \u003cstrong\u003eLifetime Warranty\u003c\/strong\u003e, giving you total confidence in both performance and safety.\u003c\/p\u003e\n\n\u003ch4\u003ePersonalise Your Setup\u003c\/h4\u003e\n\u003cp\u003eWith a wide choice of colours available, you can tailor your kit to match your car’s style. Choose subtle OEM black for a factory look, or go bold with colours that stand out through your wheels.\u003c\/p\u003e\n\n\u003ch4\u003eEngineering That Sets HEL Apart\u003c\/h4\u003e\n\u003cp\u003eHEL’s unique multi-groove fitting design ensures a perfect seal while allowing fittings to rotate freely for easy alignment during installation. Once swaged together, the hose and fitting become a single, secure unit - guaranteed not to separate.\u003c\/p\u003e\n\n\u003ch4\u003eBuilt Without Compromise\u003c\/h4\u003e\n\u003cp\u003eHEL handles every stage of production in-house, using state-of-the-art CNC equipment to deliver consistent precision and quality. This total control results in a product trusted in motorsport and approved for road use across the globe.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eFully certified and road legal worldwide\u003c\/strong\u003e - compliant with FMVSS-106 and other major international standards.\u003c\/p\u003e\n\n\u003cp\u003eChoose your preferred colour and add to basket to experience the performance and confidence that only HEL can deliver.\u003c\/p\u003e\n\n\u003ch4\u003eWhat’s Included:\u003c\/h4\u003e\n\u003cul\u003e\n \u003cli\u003eStainless Steel Braided Brake Hoses \u0026amp; Fittings\u003c\/li\u003e\n \u003cli\u003eCopper Crush Washers*\u003c\/li\u003e\n \u003cli\u003eMounting Components*\u003c\/li\u003e\n \u003cli\u003eLifetime Warranty\u003c\/li\u003e\n \u003cli\u003eInstallation Leaflet\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cem\u003e*Only provided if required.\u003c\/em\u003e\u003c\/p\u003e","brand":"HEL Performance","offers":[{"title":"Default Title","offer_id":56607311855961,"sku":"BMW-4-262","price":119.6,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0933\/7765\/9225\/files\/HEL_brake_lines_208190d7-824a-4726-9cf9-a9618a48a2ac.jpg?v=1762911468"},{"product_id":"rival-copper-plated-wheel-nuts-tapered-bmw-m3-e46","title":"Rival Copper Wheel Nuts (Tapered) - BMW M3 E46","description":"\u003cp\u003eRival Performance Copper Plated Wheel Nuts provide a performance, luxury and a unique look to your alloy wheels.\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eAlso offers heat resistance, anti-seizing properties and corrosion resistance.\u003c\/span\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003ePerfect for use with any wheel bolt to wheel stud conversion kit.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eTapered seat fitment, and sold in sets of 20.\u003cbr\u003e\u003cbr\u003eA must-have upgrade.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003enote: image is for illustration purposes and may differ on delivery\u003c\/span\u003e\u003c\/p\u003e","brand":"Rival Performance","offers":[{"title":"I accept that these are wheel nuts and not wheel bolts.","offer_id":57646801486169,"sku":"R-CWNS-M12150","price":96.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0933\/7765\/9225\/files\/RIVAL-CWN.png?v=1774289714"},{"product_id":"rival-superspline-tuner-steel-wheel-nuts-bmw-m3-e46","title":"Rival Superspline Tuner Steel Wheel Nuts - BMW M3 E46","description":"\u003cp\u003eRival Performance Superspline Tuner Steel Wheel Nuts are ideal for wheels with small pocket holes, and feature the added benefit of being external drive rather than the common internal drive.\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eSold in sets of 20.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eBeing steel, these are allowed in most Motorsport races whereas aluminium wheel nuts are not.\u003cbr\u003e\u003cbr\u003e\u003cspan\u003ePerfect for use with any wheel bolt to wheel stud conversion kit.\u003c\/span\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eAvailable in a Black or Chrome.\u003c\/p\u003e\n\u003ch3\u003eClose \u0026amp; Open Ended Wheel Nuts:\u003c\/h3\u003e\n\u003cp\u003eClose ended wheel nuts are perfect for use with factory wheel studs, but if using extended wheel studs then it should be noted that the wheel nut can only go so far onto the wheel stud before reaching it's limit. Open ended wheel nuts allow wheel studs to pass through the wheel nuts.\u003c\/p\u003e\n\u003ch3\u003eTuner Style Wheel Nuts:\u003c\/h3\u003e\n\u003cp\u003eA good tip if buying wheel bolts or wheel nuts for an aftermarket set of wheels, is to check the diameter of the wheel pocket hole. Some aftermarket wheel brands such as Japan Racing, Team Dynamics \u0026amp; XXR feature small pocket holes, and only the likes of tuner style wheel bolts or tuner wheel nuts will fit. Tuner style wheel bolts \u0026amp; wheel nuts tend to be 20mm in diameter, and can accommodate any aftermarket branded wheel set.\u003c\/p\u003e\n\u003cp\u003eNote: These wheel nut heads are a lot smaller than factory wheel nut heads and have a tapered seated fitment.\u003c\/p\u003e","brand":"Rival Performance","offers":[{"title":"Black \/ I accept that these are wheel nuts and not wheel bolts.","offer_id":57647587033433,"sku":"R-SSTWN-M12150-BLK","price":44.99,"currency_code":"GBP","in_stock":true},{"title":"Chrome \/ I accept that these are wheel nuts and not wheel bolts.","offer_id":57647587066201,"sku":"R-SSTWN-M12150-CHR","price":44.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0933\/7765\/9225\/files\/rival-superpline-black.jpg?v=1745269563"},{"product_id":"bimecc-steel-wheel-nuts-tapered-bmw-m3-e46","title":"Bimecc Steel Wheel Nuts (Tapered) - BMW M3 E46","description":"\u003cp\u003eBimecc Wheel Nuts are made from high strength steel and are coated in heavy duty black, making them ideal for track use.\u003c\/p\u003e\n\u003cp\u003ePerfect for use with any Bimecc Wheel Bolt To Wheel Stud Conversion Kit.\u003c\/p\u003e\n\u003cp\u003eSuitable for Motorsport use.\u003c\/p\u003e\n\u003cp\u003eSold in sets of 20.\u003cstrong\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003enote: image is for illustration purposes and may differ on delivery\u003c\/span\u003e\u003c\/p\u003e","brand":"Bimecc","offers":[{"title":"I accept that these are wheel nuts and not wheel bolts.","offer_id":57647767650649,"sku":"B-WNX20-M12150","price":30.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0933\/7765\/9225\/files\/rival_open_ended_steel_wheel_nuts_1_2_f5269d75-ca7a-4b5e-acec-eaf04548d8ae.jpg?v=1745370972"},{"product_id":"meisterr-zetasport-coilovers-bmw-m3-e46","title":"MeisterR ZetaSport Coilovers - BMW M3 E46","description":"\u003cp\u003eMeisterR ZetaSport coilovers are engineered to offer top-tier performance along with exceptional ride comfort.\u003c\/p\u003e\n\u003cp\u003eFor road and track use, with the focus on ride compliance. Designed to be the best all-around suspension within its price bracket, providing uncompromising performance for the road and occasional track.\u003cbr\u003e\u003cbr\u003eThe features found within the ZetaSport are typically found in high-end suspension systems that cost twice as much, making the ZetaSport the best value for your investment.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eThe key to this performance is the MeisterR SRV (Speed Reactive Valve), developed and manufactured in-house at MeisterR's UK workshop. Drawing on over a decade of experience, the SRV represents an innovative valving design that combines the responsiveness of a digressive valve with the comfort of a linear valve. This results in unparalleled ride comfort, precise steering response, and enhanced chassis stability.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e32-stage damping adjustments (Compression and Rebound Combined)\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eSRV (Speed Reactive Valve) technology.\u003c\/li\u003e\n\u003cli\u003eIndependent ride height and springs pre-load adjustment.\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eBump Stop and Rubber Boot included.\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e1 year limited warranty.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eSpring Rates \u0026amp; Top Mount Info:\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eFront Top Mount: M3 Spec Caster Offset Aluminium with Spherical Bearing and Camber Adjustment (Offset for M3 Spec Caster)\u003c\/li\u003e\n\u003cli\u003eFront Spring Rate: 7kg\/mm\u003c\/li\u003e\n\u003cli\u003eRear Top Mount: Aluminium with Rubber Bush\u003c\/li\u003e\n\u003cli\u003eRear Spring Rate: 9kg\/mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan\u003enote: image is for illustration purposes and may differ on delivery\u003c\/span\u003e\u003c\/p\u003e","brand":"MeisterR","offers":[{"title":"Default Title","offer_id":57689591644505,"sku":"SRV-I14RS-E46-M3","price":1199.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0933\/7765\/9225\/files\/MI14R_e1cdc0ce-8b6d-487d-aac0-1003de380f80.jpg?v=1774875640"},{"product_id":"airtec-exhaust-hanger-brace-bmw-m3-e46-m3-e92","title":"AIRTEC Exhaust Hanger Brace - BMW M3 E46\/M3 E92","description":"\u003cp\u003eThe AIRTEC Exhaust Hanger Brace is made from 4mm high-quality aluminium that’s laser cut for the perfect fitment, these direct replacement braces offer improved rigidity and will not corrode like the originals tend to. \u003c\/p\u003e\n\u003cp\u003eFinished in anodised black, fitting takes just 30 minutes and it is supplied with installation instructions. \u003c\/p\u003e\n\u003cp\u003eFitment:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eReplaces BMW part number: 18211436309\u003c\/li\u003e\n\u003cli\u003eBMW M3 E90\/E92\/E93 (requires x1)\u003c\/li\u003e\n\u003cli\u003eBMW M3 E46 (requires x2)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eFeatures:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMade from 4mm high-quality aluminium \u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eLaser cut for perfect fitment \u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eFinished in anodised black \u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eDirect replacement for original \u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eFitted in 30 minutes \u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eInstallation instructions included\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"AIRTEC","offers":[{"title":"x1 (E90\/E92\/E93)","offer_id":58737361977689,"sku":"ATMSBMW29","price":46.95,"currency_code":"GBP","in_stock":true},{"title":"x2 (E46 M3)","offer_id":58737362010457,"sku":"ATMSBMW29-ATMSBMW29","price":93.9,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0933\/7765\/9225\/files\/ATMSBMW29_4.jpg?v=1785440241"},{"product_id":"powerflex-suspension-bush-handling-pack-bmw-m3-e46","title":"Powerflex Suspension Bush Handling Pack - BMW M3 E46","description":"\u003cp\u003eThe Powerflex Suspension Bush Handling Pack contains bushes that have been specifically selected to give the perfect combination of value and performance based on years of experience.\u003c\/p\u003e\n\u003cp\u003ePowerflex have chosen products from their range to maximize the performance of the suspension, whilst being mindful of cost with a price saving over buying the parts individually. This can be an ideal upgrade complementing other suspension upgrades such as shock absorbers and springs. Each handling pack box includes a complimentary Powerflex keyring and sticker.\u003c\/p\u003e\n\u003cp\u003eProvides improved reliability over original parts and of course carries Powerflex's Lifetime Warranty!\u003cbr\u003e\u003cspan\u003e\u003cstrong\u003e\u003cbr\u003eIncluded Bushes (diagram number references):\u003cbr\u003e\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cspan\u003eFront Wishbone Rear Bushes (1)\u003c\/span\u003e\u003cspan\u003e\u003cbr\u003e\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003eRear Trailing Arm Front Bushes (3)\u003c\/li\u003e\n\u003cli\u003eRear Subframe Front Bushes (10)\u003c\/li\u003e\n\u003cli\u003eRear Subframe Rear Bushes (11)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan\u003ePOWERFLEX bushes are of superior design, manufactured from polyurethane \u003c\/span\u003e\u003cspan\u003eand \u003c\/span\u003e\u003cspan\u003eimprove the cars road holding \u0026amp; chassis performance by controlling the amount of unwanted flex!\u003c\/span\u003e\u003cspan\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eFactory chassis \u0026amp; suspension bushes\u003c\/span\u003e\u003cspan\u003e are manufactured from is a rubber compound containing natural products that deteriorate with age. It becomes softer and more pliable, resisting the forces placed on it less and less. Therefore allowing more and more movement of suspension components and offering less and less control over the suspension geometry. \u003c\/span\u003e\u003cspan\u003eThis in turn causes accelerated tyre wear, braking instability, and poor handling. POWERFLEX polyurethane bushes eliminate this.\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003ePOWERFLEX \u003c\/span\u003epossess mass automotive chassis \u0026amp; \u003cspan\u003esuspension\u003c\/span\u003e experience and have combined their design skills with advanced polyurethane manufacturing techniques in order to develop a wide range of high performance automotive polyurethane bush components. \u003cspan\u003ePOWERFLEX\u003c\/span\u003e\u003cspan\u003e Purple Series\u003c\/span\u003e\u003cspan\u003e bushes are for both road and fast road use. They are 15-20% stiffer than factory and\u003c\/span\u003e\u003cspan\u003e result with the tyres having greater contact with the road at all times, therefore, improving safety and performance.\u003cbr\u003e\u003c\/span\u003e\u003cbr\u003e\u003cstrong\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePOWERFLEX Polyurethane Bush Features:\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eGreater Cost-effectiveness vs OEM\/OE Rubber Bushes\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eImproved Performance\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eReduced Movement\u003cbr\u003e\u003cspan\u003e\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan\u003eProlonged Tyre Life\u003c\/span\u003e\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eIncreased Safety\u003c\/li\u003e\n\u003cli\u003eBetter Longevity\u003c\/li\u003e\n\u003cli\u003eHeat Resistance\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003ePOWERFLEX Bush Shore Ratings \u0026amp; Use:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eRed (65A)\u003c\/strong\u003e\u003cspan\u003e – Mainly used for exhaust mounts and diesel engine mounts.\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eYellow (70A)\u003c\/strong\u003e\u003cspan\u003e – Mainly used for engine mounts, differential mounts \u0026amp; subframe mounts, or areas where the bush needs a lot of movement and absorption.\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePurple (80A)\u003c\/strong\u003e\u003cspan\u003e – The most common, and is used in most areas of the suspension to provide the right mix between performance \u0026amp; compliance.\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBlack (95A)\u003c\/strong\u003e\u003cspan\u003e – POWERFLEX's hardest material. Mainly used where the vehicles standard suspension demands the use of this hardness of material i.e. in areas of high load.\u003cbr\u003e\u003c\/span\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003ePOWERFLEX Lifetime Warranty:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003ePOWERFLEX are proud to offer a lifetime warranty on their manufactured products. They have taken this decision because of the confidence that they have in both their products and also in the way that they have handled any warranty issues in the past.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eThey have never had a time period based warranty policy because they have always treated issues that customers have had as an opportunity to learn. Where a problem has occurred due to incorrect fitting, POWERFLEX have always asked themselves if the reason for the error was due to poor fitting instructions. When they have had a part failure they have tried to understand if the part was being used outside of its design parameters, perhaps on a race car running slick tyres. In cases like this, should POWERFLEX be offering a specific Motorsport compound?\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eLike all manufacturing, POWERFLEX have had the occasional material quality issue and in these cases, they have always replaced parts without question. So now POWERFLEX have decided to formalise their open and honest policy and boast about it!\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003ePOWERFLEX will replace any POWERFLEX product that any customer in the world is unhappy with for any reason. The only conditions that POWERFLEX attach to the warranty are:\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eBy purchasing and using POWERFLEX products, you are agreeing to the terms of their lifetime warranty as set out below.\u003c\/li\u003e\n\u003cli\u003eThis warranty applies to the original purchaser only. Proof of purchase may be required.\u003c\/li\u003e\n\u003cli\u003eThat in the event of an issue you can contact POWERFLEX directly at sales@powerflex.co.uk and give as much information as possible to enable POWERFLEX to help you. This will involve giving them details of the installation and any changes made to the car, photos of failed parts, and the installation.\u003c\/li\u003e\n\u003cli\u003eWarranty is restricted to the replacement of the supplied goods, but no consequential loss (e.g. carriage charges, garage labour costs, vehicle recovery, car hire, loss of earnings, etc.) from any resulting problems. In the event of failure, we may require the old, failed parts returned to us for inspection after sending replacements.\u003c\/li\u003e\n\u003cli\u003eAny parts used for track\/Motorsport\/competition purposes or part numbers ending ‘BLK’ are excluded from the POWERFLEX lifetime warranty.\u003c\/li\u003e\n\u003cli\u003eWhat POWERFLEX ask in return is that anyone wanting replacement parts contacts them directly and sends them as much information as possible which will help us determine the reason for a problem.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eOperating in a self-contained state of the art factory, manufacturing everything in-house, Powerflex stainless steel components are machined on the latest computer-controlled equipment to ensure perfect repeatability \u0026amp; quality! The moulding and tooling, design and manufacturing are carried out within the factory ensuring very rapid response time and complete communication between development, prototyping, testing and manufacturing departments. Component manufacturing is carried out with the latest automatic processing equipment ensuring 100% right-first-time quality. Testing of new components is carried out both on the vehicle and on test rigs. All of this makes POWERFLEX the number one selling performance bushes in Europe!\u003c\/p\u003e\n\u003cp\u003enote: image is for illustration purposes and may differ on delivery\u003c\/p\u003e","brand":"Powerflex","offers":[{"title":"Default Title","offer_id":59700507967833,"sku":"PF5K-1006","price":402.36,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0933\/7765\/9225\/files\/PF5K-1006.jpg?v=1791111628"},{"product_id":"powerflex-front-wishbone-rear-bushes-bmw-m3-e46","title":"Powerflex Front Wishbone Rear Bushes - BMW M3 E46","description":"\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eDIAGRAM REFERENCE NUMBER 1\u003cbr\u003ePRODUCT NOTES:\u003cbr\u003e\u003c\/strong\u003eThe aluminium outer option is a high performance option over the standard Powerflex version. The caster offset kit offers an additional +0.5 degree of caster, which results\u003c\/span\u003e with \u003cspan\u003eless movement in the arm under cornering \u0026amp; braking, along with improved steering control \u0026amp; feel.\u003cbr\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003ePOWERFLEX bushes are of superior design, manufactured from polyurethane \u003c\/span\u003e\u003cspan\u003eand \u003c\/span\u003e\u003cspan\u003eimprove the cars road holding \u0026amp; chassis performance by controlling the amount of unwanted flex!\u003c\/span\u003e\u003cspan\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eFactory chassis \u0026amp; suspension bushes\u003c\/span\u003e\u003cspan\u003e are manufactured from is a rubber compound containing natural products that deteriorate with age. It becomes softer and more pliable, resisting the forces placed on it less and less. Therefore allowing more and more movement of suspension components and offering less and less control over the suspension geometry. \u003c\/span\u003e\u003cspan\u003eThis in turn causes accelerated tyre wear, braking instability, and poor handling. POWERFLEX polyurethane bushes eliminate this.\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003ePOWERFLEX \u003c\/span\u003epossess mass automotive chassis \u0026amp; \u003cspan\u003esuspension\u003c\/span\u003e experience and have combined their design skills with advanced polyurethane manufacturing techniques in order to develop a wide range of high performance automotive polyurethane bush components.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003ePurple vs Black Series:\u003c\/strong\u003e\u003cbr\u003e\u003cspan\u003ePOWERFLEX\u003c\/span\u003e\u003cspan\u003e Purple Series\u003c\/span\u003e\u003cspan\u003e bushes are for both road and fast road use. They are 15-20% stiffer than factory and\u003c\/span\u003e\u003cspan\u003e result with the tyres having greater contact with the road at all times, therefore, improving safety and performance.\u003cbr\u003e\u003cbr\u003e\u003c\/span\u003ePOWERFLEX Black Series bushes are designed for the track, ready to race and are engineered to be the best. They are manufactured using Black 95 Shore A compound to provide maximum control of chassis geometry. This compound can be up to 80% more resistant to load than standard rubber and 25% stiffer than POWERFLEX's purple performance material. If the requirements are purely for the ultimate in handling and chassis performance then POWERFLEX Black Series are unique, offering the most precise and accurate alignment for the chassis.\u003cbr\u003e\u003cstrong\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePOWERFLEX Polyurethane Bush Features:\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eGreater Cost-effectiveness vs OEM\/OE Rubber Bushes\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eImproved Performance\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eReduced Movement\u003cbr\u003e\u003cspan\u003e\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan\u003eProlonged Tyre Life\u003c\/span\u003e\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eIncreased Safety\u003c\/li\u003e\n\u003cli\u003eBetter Longevity\u003c\/li\u003e\n\u003cli\u003eHeat Resistance\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003ePOWERFLEX Bush Shore Ratings \u0026amp; Use:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eRed (65A)\u003c\/strong\u003e\u003cspan\u003e – Mainly used for exhaust mounts and diesel engine mounts.\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eYellow (70A)\u003c\/strong\u003e\u003cspan\u003e – Mainly used for engine mounts, differential mounts \u0026amp; subframe mounts, or areas where the bush needs a lot of movement and absorption.\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePurple (80A)\u003c\/strong\u003e\u003cspan\u003e – The most common, and is used in most areas of the suspension to provide the right mix between performance \u0026amp; compliance.\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBlack (95A)\u003c\/strong\u003e\u003cspan\u003e – POWERFLEX's hardest material. Mainly used where the vehicles standard suspension demands the use of this hardness of material i.e. in areas of high load.\u003cbr\u003e\u003c\/span\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003ePOWERFLEX Lifetime Warranty:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003ePOWERFLEX are proud to offer a lifetime warranty on their manufactured products. They have taken this decision because of the confidence that they have in both their products and also in the way that they have handled any warranty issues in the past.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eThey have never had a time period based warranty policy because they have always treated issues that customers have had as an opportunity to learn. Where a problem has occurred due to incorrect fitting, POWERFLEX have always asked themselves if the reason for the error was due to poor fitting instructions. When they have had a part failure they have tried to understand if the part was being used outside of its design parameters, perhaps on a race car running slick tyres. In cases like this, should POWERFLEX be offering a specific Motorsport compound?\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eLike all manufacturing, POWERFLEX have had the occasional material quality issue and in these cases, they have always replaced parts without question. So now POWERFLEX have decided to formalise their open and honest policy and boast about it!\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003ePOWERFLEX will replace any POWERFLEX product that any customer in the world is unhappy with for any reason. The only conditions that POWERFLEX attach to the warranty are:\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eBy purchasing and using POWERFLEX products, you are agreeing to the terms of their lifetime warranty as set out below.\u003c\/li\u003e\n\u003cli\u003eThis warranty applies to the original purchaser only. Proof of purchase may be required.\u003c\/li\u003e\n\u003cli\u003eThat in the event of an issue you can contact POWERFLEX directly at sales@powerflex.co.uk and give as much information as possible to enable POWERFLEX to help you. This will involve giving them details of the installation and any changes made to the car, photos of failed parts, and the installation.\u003c\/li\u003e\n\u003cli\u003eWarranty is restricted to the replacement of the supplied goods, but no consequential loss (e.g. carriage charges, garage labour costs, vehicle recovery, car hire, loss of earnings, etc.) from any resulting problems. In the event of failure, we may require the old, failed parts returned to us for inspection after sending replacements.\u003c\/li\u003e\n\u003cli\u003eAny parts used for track\/Motorsport\/competition purposes or part numbers ending ‘BLK’ are excluded from the POWERFLEX lifetime warranty.\u003c\/li\u003e\n\u003cli\u003eWhat POWERFLEX ask in return is that anyone wanting replacement parts contacts them directly and sends them as much information as possible which will help us determine the reason for a problem.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eOperating in a self-contained state of the art factory, manufacturing everything in-house, Powerflex stainless steel components are machined on the latest computer-controlled equipment to ensure perfect repeatability \u0026amp; quality! The moulding and tooling, design and manufacturing are carried out within the factory ensuring very rapid response time and complete communication between development, prototyping, testing and manufacturing departments. Component manufacturing is carried out with the latest automatic processing equipment ensuring 100% right-first-time quality. Testing of new components is carried out both on the vehicle and on test rigs. All of this makes POWERFLEX the number one selling performance bushes in Europe!\u003c\/p\u003e\n\u003cp\u003enote: image is for illustration purposes and may differ on delivery\u003c\/p\u003e","brand":"Powerflex","offers":[{"title":"Standard Purple Series","offer_id":59700823916889,"sku":"PFF5-4601M3","price":87.96,"currency_code":"GBP","in_stock":true},{"title":"Aluminium Outer Purple Series","offer_id":59700823949657,"sku":"PFF5-5601M3","price":163.2,"currency_code":"GBP","in_stock":true},{"title":"Caster Offset Purple Series","offer_id":59701152186713,"sku":"PFF5-5601GM3","price":167.28,"currency_code":"GBP","in_stock":true},{"title":"Standard Black Series","offer_id":59700823982425,"sku":"PFF5-4601M3BLK","price":96.84,"currency_code":"GBP","in_stock":true},{"title":"Aluminium Outer Black Series","offer_id":59701152219481,"sku":"PFF5-5601M3BLK","price":179.52,"currency_code":"GBP","in_stock":true},{"title":"Caster Offset Black Series","offer_id":59700824015193,"sku":"PFF5-5601GM3BLK","price":184.01,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0933\/7765\/9225\/files\/PFF5-5601M3.jpg?v=1791122104"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0933\/7765\/9225\/collections\/rival-vehicle-bmw-m3-e46-v1.webp?v=1789382223","url":"https:\/\/www.rivalperformance.co.uk\/collections\/bmw-m3-e46.oembed?page=4","provider":"Rival Performance","version":"1.0","type":"link"}